Techtronics product archive #41160

Image

Date

Product description

Price

Buy

10/09

LEDware Dimmable LED Driver Power Supply Constant Voltage - 240V to 12V, 10W, 800mA, EMC SAA Internal Use

LEDware Dimmable LED Driver Power Supply Constant Voltage 240V to 12V 10W 800mA EMC SAA Internal Use

LED-DRV-INT-10WD

DESCRIPTION

A LED driver is a self-contained power supply that has outputs matched to the electrical characteristics of your LED or array of LEDs. There are currently no industry standards, so understanding the electrical characteristics of your LED or array is critical in selecting or designing a driver circuit. Drivers should be current-regulated (deliver a consistent current over a range of load voltages). Drivers may have more than one channel for separate control of different LEDs or arrays.

Features:

Compact size
Dimmable with leading or trailing edge dimmer
Over load protection
Output short circuit protection
1.0KV surge protection
Compliance with Safety standard--EN61347-2-13/UL1310&UL8750
Compliance with EMC standard--EN55015/FCC Part 15 class A
5 year warranty

Specifications:

Input voltage range:220V-240VAC 50/60Hz
Input currency:Max 0.05A
Power factor:0.9 typ
Output voltage:constant voltage 12V
Output current:Max 0.83A
Output load:Max. 10W
Output Min load:4 W/MR16 4W*1pcs
Operating Temp.(ta):-100C to 450C
Case Temp.(tc): Max 860C
Size(LXWXH):124cm X 39mm X 24mm

Link contains in-depth information about this product

10/09

LEDware LED Starter for LED Tubes - Powered from Single End - 240V/2A Fuse Tube Additional Spare Part

LEDware LED Starter for LED Tubes Powered from Single End - 240V/2A Fuse Tube Additional Spare Part

LED-TL-STARTER

NationStar LED Starter for LED Tubes Powered from Single End - 240V/2A Fuse Tube Spare Part

10/09

LEDware LED Tube Light - 240V, 1.2m, T8, 20W >1850Lm - Cool White 6000K SAA Internal Isolated One-End Power

LEDware LED Tube Light 240V 1.2m T8 20W >1850Lm Cool White 6000K SAA Internal Isolated One-End Power

LED-TL-T8CW-20W

Description

LED tubes are designed to replace standard fluorescent tubes. They emit a cool white light whilst also reducing power consumption which in turn, saves money.

The physical glass tube used in traditional fluorescent tubes has been replaced by a more robust plastic composition making these LED tubes considerably safer.

9W LED tubes replace 18W standard fluorescents and 18W LED tubes replace 36W standard fluorescents and are available in both 600mm and 1200mm lengths.

These tubes can be used as a replacement for standard fluorescent tubes and the only thing to do is to remove the starter before put new tube.

A LED starter is included in the tube package and spare LED starters are available to be purchased separately.

What are the immediate benefits of switching to LED lighting

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs
Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.

Efficiency: LEDs produce more light per watt than incandescent bulbs.
Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.
Size: LEDs can be very small and are easily populated onto printed circuit boards.
On/Off time: LEDs light up immediately.
Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.
Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.
Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.
Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,0002,000 hours.
Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.
Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.
Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

APPLICATIONS:

Item	Test Conditions	Min.	Typ.	Max.
Input Voltage(V, rms)	AC	90	220	264
Input Current(A, rms)	AC(12V)	---	0.09	---
Input Power(W, rms)	AC(All)	---	20	---
Input Frequency(Hz)	AC	---	50HZ	---
Power Factor(PF)	AC(All)	>0.9
Output Voltage(V)	DC	39	39.5	40
Output Current(A)	DC	0.42	0.435	0.45
Output Power(W)	DC	16.38	17.1825	18

Environmental Requirements

Specifications	Values
Operational Temperature Range	-20~40⁰C
Preservation Temperature Range	-20~90⁰C
Operational Humidity Range	95%Rh or belcw (@-20~40⁰C)
Installation Area	Indoor (Counter,Residential,Commercial,etc)

A LED starter is included in the tube package and spare LED starters are available to be purchased separately.

Category	Specifications
Watts	20 W
Lumens per Watt(Efficacy)	92 Lm/W
Light Output	1850 lm
Light Color(CCT)	6000 K
Beam Angle	120 (degree)
IP Rating	IP 20
Color Accuracy(CRI)	70 Ra
Product Weight	360 G
Rating Life	35000 H
Base	G13
Input Voltage(AC/DC)	220 V

10/09

LEDware LED Tube Light - 240V, 1.2m, T8, 18W, 1600Lm - CW SAA Int Isolated Power Frosted Direct Replaceable

LEDware LED Tube Light 240V 1.2m T8 18W 1600Lm CW SAA Int Isolated Power Frosted Direct Replaceable

LED-TL-T8CW-18WU

Description

LED tubes are designed to replace standard fluorescent tubes. They emit a cool white light whilst also reducing power consumption which in turn, saves money.

The physical glass tube used in traditional fluorescent tubes has been replaced by a more robust plastic composition making these LED tubes considerably safer.

9W LED tubes replace 18W standard fluorescents and 18W LED tubes replace 36W standard fluorescents and are available in both 600mm and 1200mm lengths.

These tubes can be used as a replacement for standard fluorescent tubes and the only thing to do is to remove the starter before put new tube.

What are the immediate benefits of switching to LED lighting

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs
Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.

Efficiency: LEDs produce more light per watt than incandescent bulbs.
Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.
Size: LEDs can be very small and are easily populated onto printed circuit boards.
On/Off time: LEDs light up immediately.
Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.
Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.
Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.
Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,0002,000 hours.
Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.
Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.
Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

APPLICATIONS:

Features:

Using high brightness LED chip, High light efficiency
Using high efficiency and high power factor led driver. The power efficiency is 88%. Power factor is above 0.9.
No Mercury, UV and IR
AC power supply. No need for ballast or starter.
Compatible with G13 lamp holder.Meet all traditional fluorescent tubes.Replace traditional inductive tube and electronic tube directly.No need modify wire.
Good transmittance. Reach at 88%
Luminous uniform, no dizziness or ghosting.
NO Ultraviolet radiation
Half aluminum and half PC of exterior material. Aluminum PCB. Good heat output.

Specifications:

Chip: Epistar
Indoor use IP Grate :IP45.
Ambient temperature:-20°C-50°C
Input power :AC110-245V 50/60Hz
Power:18W
AC power factor:<=0.85
CRI =70
Bean angle: 120°
Ambient temperature:-20°C-50°C
Working Temperature:-20°C-45°C
Storage Temp. Rating: -20°C~60°C
Approval: CE,ROHS,FCC,PSE
CCT:6000-7000K

10/09

LEDware LED Tube Light - 240V, 0.6m, T8, 10W, 800Lm - CW SAA Int Isolated Power Frosted Direct Replaceable

LEDware LED Tube Light 240V 0.6m T8 10W 800Lm CW SAA Int Isolated Power Frosted Direct Replaceable

LED-TL-T8CW-10WU

Description

LED tubes are designed to replace standard fluorescent tubes. They emit a cool white light whilst also reducing power consumption which in turn, saves money.

The physical glass tube used in traditional fluorescent tubes has been replaced by a more robust plastic composition making these LED tubes considerably safer.

9W LED tubes replace 18W standard fluorescents and 18W LED tubes replace 36W standard fluorescents and are available in both 600mm and 1200mm lengths.

These tubes can be used as a replacement for standard fluorescent tubes and the only thing to do is to remove the starter before put new tube.

What are the immediate benefits of switching to LED lighting

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs
Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.

Efficiency: LEDs produce more light per watt than incandescent bulbs.
Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.
Size: LEDs can be very small and are easily populated onto printed circuit boards.
On/Off time: LEDs light up immediately.
Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.
Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.
Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.
Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,0002,000 hours.
Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.
Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.
Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

APPLICATIONS

Features:

Using high brightness LED chip, High light efficiency
Using high efficiency and high power factor led driver. The power efficiency is 88%. Power factor is above 0.9.
No Mercury, UV and IR
AC power supply. No need for ballast or starter.
Compatible with G13 lamp holder.Meet all traditional fluorescent tubes.Replace traditional inductive tube and electronic tube directly.No need modify wire.
Good transmittance. Reach at 88%
Luminous uniform, no dizziness or ghosting.
NO Ultraviolet radiation
Half aluminum and half PC of exterior material. Aluminum PCB. Good heat output.

Specifications:

CHIP: Epistar
Indoor use IP Grate :IP45.
Ambient temperature:-20°-50°C
Input power :AC110-245V 50/60Hz
Power:10W
AC power factor:<=0.85
CRI =70
Bean angle: 120°
Ambient temperature:-20°C-50°C
Working Temperature:-20°C-45°C
Storage Temp. Rating: -20°C~60°C
Approval: CE,ROHS,FCC,PSE
CCT: 6000-7000K

10/09

LEDware LED Tube Light - 240V, 0.6m, T8, 10W >850Lm - Cool White 6000K SAA Internal Isolated One-End Power

LEDware LED Tube Light 240V 0.6m T8 10W >850Lm Cool White 6000K SAA Internal Isolated One-End Power

LED-TL-T8CW-10W

LED tubes are designed to replace standard fluorescent tubes. They emit a cool white light whilst also reducing power consumption which in turn, saves money.

The physical glass tube used in traditional fluorescent tubes has been replaced by a more robust plastic composition making these LED tubes considerably safer.

9W LED tubes replace 18W standard fluorescents and 18W LED tubes replace 36W standard fluorescents and are available in both 600mm and 1200mm lengths.

These tubes can be used as a replacement for standard fluorescent tubes and the only thing to do is to remove the starter before put new tube.

A LED starter is included in the tube package and spare LED starters are available to be purchased separately.

What are the immediate benefits of switching to LED lighting

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs
Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.

Efficiency: LEDs produce more light per watt than incandescent bulbs.
Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.
Size: LEDs can be very small and are easily populated onto printed circuit boards.
On/Off time: LEDs light up immediately.
Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.
Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.
Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.
Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,0002,000 hours.
Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.
Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.
Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

APPLICATIONS:

Watts	11 W
Lumens per Watt(Efficacy)	77 Lm/W
Light Output	850 lm
Light Color(CCT)	6000 K
Beam Angle	120 (degree)
Color Accuracy(CRI)	70 Ra
Product Weight	220 G
Rating Life	35000 H
Base	G13
Input Voltage(AC/DC)	220 V

Technical Specification

Item	Test Conditions	Min.	Typ.	Max.
Input Voltage(V, rms)	AC	90	220	264
Input Current(A, rms)	AC(220V)	---	0.05	---
Input Power(W, rms)	AC(All)	---	11	---
Input Frequency(Hz)	AC	---	50HZ	---
Power Factor(PF)	AC(All)	>0.9
Output Voltage(V)	DC	39	39.5	40
Output Current(A)	DC	0.21	0.22	0.23
Output Power(W)	DC	8.19	8.69	9.2

Environmental Requirements

Specifications	Values
Operational Temperature Range	-20~40⁰C
Preservation Temperature Range	-20~90⁰C
Operational Humidity Range	95%Rh or belcw (@-20~40⁰C)
Installation Area	Indoor (Counter,Residential,Commercial,etc)

10/09

LEDware Dimmable LED Spot Light MR16 Replacement Bulb - 12V, 9W (3x3W), 380Lm - Warm White Edison Chip SAA

LEDware Dimmable LED Spot Light MR16 Replacement Bulb 12V 9W (3x3W) 380Lm Warm White Edison Chip SAA

LED-SL-MR16WW-9W

Description

LEDware LED Spotlights possess truly superb lighting quality making them an outstandingly efficient replacement for traditional incandescent bulbs.

They can provide directional lighting to highlight features on a wall or as a decorative illumination of living space. LED Spotlights are free from UV radiation meaning no skin damage and no fading of furnishings – whether it be an oil painting or an antique chair.
The narrow flood bulbs use only 9W of energy to replace a 50W incandescent lamp (85% Energy Savings) and last 10x longer (40, 000 hours). These bulbs provide warm white light and excellent colour rendition and are the most environmentally friendly lighting solution available today.

Furthermore these LED lights will fit the majority of existing light fittings.

What are the immediate benefits of switching to LED lighting?

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs
Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.
Efficiency: LEDs produce more light per watt than incandescent bulbs.
Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.
Size: LEDs can be very small and are easily populated onto printed circuit boards.
On/Off time: LEDs light up immediately.
Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.
Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.
Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.
Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,0002,000 hours.
Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.
Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.
Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

Features:

Good Quality Materials: AL6063 aluminium light housing. good looking wigh plastic socket. insulated and safe plastic sochet.

Specifications:

WATTAGE: 9 watts
LED SOURCE / CHIP: Edison Chip
INPUT VOLTAGE: 12v AC/DC
LUMEN: 380LM
LIGHT COLOR: Warm White
BEAM ANGLE: 45°
BASE TYPE: MR16
COLOR TEMPERATURE: 2800-3200K
LED QTY: 3
LIFE SPAN: 40,000 Hours
DIMMING RANGE: 0-100%
IP RATING: IP 20
RA INDEX: 70
HOUSING: Silver
DIMENSIONS: See Image
NB: This bulb does not work with all Electronic Transformers.

10/09

LEDware Dimmable LED Spot Light MR16 Replacement Bulb - 12V, 6W (3x2W), 330Lm - Warm White Edison Chip SAA

LEDware Dimmable LED Spot Light MR16 Replacement Bulb 12V 6W (3x2W) 330Lm Warm White Edison Chip SAA

LED-SL-MR16WW-6W

LEDware LED Spotlights possess truly superb lighting quality and are an outstandingly efficient replacement for traditional incandescent bulbs.

The narrow flood bulbs use only 9W of energy to replace a 50W incandescent lamp (85% Energy Savings) and last 10x longer (40, 000 hours). These bulbs provide warm white light and excellent colour rendition and are the most environmentally friendly lighting solution available today.

Furthermore these LED lights will fit the majority of existing light fittings.

What are the immediate benefits of switching to LED lighting

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs
Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.
Efficiency: LEDs produce more light per watt than incandescent bulbs.
Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.
Size: LEDs can be very small and are easily populated onto printed circuit boards.
On/Off time: LEDs light up immediately.
Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.
Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.
Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.
Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,0002,000 hours.
Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.
Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.
Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

Specifications:

Voltage: 12V

Colour: Warm White

CCT:3000-3200K

LED: 3x2W Edison

Beam angle: 600

Size: 50 x 60mm

Lumens:WW-330lm

RA INDEX: 75

IP RATING: IP 20

10/09

LEDware Dimmable LED Spot Light MR16 Replacement Bulb - 12V, 3W (1x3W), 120Lm - Warm White Everlight Chip

LEDware Dimmable LED Spot Light MR16 Replacement Bulb 12V 3W (1x3W) 120Lm Warm White Everlight Chip

LED-SL-MR16WW-3W

LEDware LED Spotlights possess truly superb lighting quality making them an outstandingly efficient replacement for traditional incandescent bulbs.

They can provide directional lighting to highlight features on a wall or as a decorative illumination of living space. LED Spotlights are free from UV radiation meaning no skin damage and no fading of furnishings – whether it be an oil painting or an antique chair.

The narrow flood bulbs use only 3W of energy to replace a 25W incandescent lamp (85% Energy Savings) and last 10x longer (35, 000 hours). These bulbs provide warm white light and excellent colour rendition and are the most environmentally friendly lighting solution available today.

Furthermore these LED lights will fit the majority of existing light fittings.

What are the immediate benefits of switching to LED lighting?

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs
Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.
Efficiency: LEDs produce more light per watt than incandescent bulbs.
Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.
Size: LEDs can be very small and are easily populated onto printed circuit boards.
On/Off time: LEDs light up immediately.
Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.
Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.
Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.
Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,0002,000 hours.
Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.
Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.
Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

Features:

Certificates: CE. RoHS. FCC
UVfree: Unlike halogen bub, LED spotlight is free from UV light. This means no skin damage and no fading of furnishing.

Specifications:

WATTAGE: 2.8~3.5 watts
CHIP:Everlight
Water Class: IP20
INPUT VOLTAGE: AC/DC12V 50/60Hz
Luminous Flux: 120~130
Luminous Efficacy: 48
Equal to: (Incandescent Lamp) 20w
VIEWING ANGLE: 30°
CCT: 3000-3500K
Rendering Index: Ra 75
IP Rating: IP 20
LIFE SPAN: 35,000 Hours
Operating Temperature: -30~40°C
DIMENSIONS: See Image
NB: This bulb does not work with all Electronic Transformers.

10/09

LEDware Dimmable LED Spot Light MR16 Replacement Bulb - 12V, 9W (3x3W), 420Lm - Cool White Edison Chip SAA

LEDware Dimmable LED Spot Light MR16 Replacement Bulb 12V 9W (3x3W) 420Lm Cool White Edison Chip SAA

LED-SL-MR16CW-9W

Description

LEDware LED Spotlights possess truly superb lighting quality making them an outstandingly efficient replacement for traditional incandescent bulbs.

Furthermore these LED lights will fit the majority of existing light fittings.

What are the immediate benefits of switching to LED lighting?

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs
Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.
Efficiency: LEDs produce more light per watt than incandescent bulbs.
Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.
Size: LEDs can be very small and are easily populated onto printed circuit boards.
On/Off time: LEDs light up immediately.
Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.
Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.
Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.
Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,0002,000 hours.
Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.
Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.
Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

Features:

Good quality materials: AL6063 aluminium light housing. good looking wigh plastic socket. insulated and safe plastic sochet.

Specifications:

WATTAGE: 9 watts
LED SOURCE / CHIP: Edison Chip
INPUT VOLTAGE: 12v AC/DC
LUMEN: 420LM
LIGHT COLOR: Cold White
BEAM ANGLE: 45°
BASE TYPE: MR16
COLOR TEMPERATURE: 3000K
LED QTY: 3
LIFE SPAN: 40,000 Hours
DIMMING RANGE: 0-100%
IP RATING: IP 20
RA INDEX: 70
HOUSING: Silver
DIMENSIONS: See Image

NB: This bulb does not work with all Electronic Transformers.

10/09

LEDware Dimmable LED Spot Light GU10 Replacement Bulb - 240V, 9W (3x3W), 420Lm - Cool White SAA

LEDware Dimmable LED Spot Light GU10 Replacement Bulb 240V 9W (3x3W) 420Lm Cool White SAA

LED-SL-GU10CW-9WD

LEDware LED Spotlights possess truly superb lighting quality and are an outstandingly efficient replacement for traditional incandescent bulbs.

Furthermore these LED lights will fit the majority of existing light fittings.

What are the immediate benefits of switching to LED lighting

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs
Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.
Efficiency: LEDs produce more light per watt than incandescent bulbs.
Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.
Size: LEDs can be very small and are easily populated onto printed circuit boards.
On/Off time: LEDs light up immediately.
Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.
Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.
Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.
Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,0002,000 hours.
Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.
Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.
Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

Features:

Good quality materials
AL6063 aluminium light housing
Good looking wigh plastic socket, insulated and safe plastic sochet.

Specifications:

Voltage:AC200-240V
Colour:Warm White
CCT:5500-6000K
LED:3 x 3W Edison
Beam angle:450
Size: 50x90mm
RA INDEX: 75
IP RATING: IP 20
Dimmable: Yes

10/09

LEDware LED Spot Light GU10 Replacement Bulb - 240V, 9W (3x3W), 380Lm - Warm White Non-Dimmable SAA

LEDware LED Spot Light GU10 Replacement Bulb 240V 9W (3x3W) 380Lm Warm White Non-Dimmable SAA

LED-SL-GU10WW-9W

Description

LEDware LED Spotlights possess truly superb lighting qualityand arean outstandingly efficient replacement for traditional incandescent bulbs.

Furthermore these LED lights will fit the majority of existing light fittings.

What are the immediate benefits of switching to LED lighting?

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs
Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years
Efficiency: LEDs produce more light per watt than incandescent bulbs.
Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.
Size: LEDs can be very small and are easily populated onto printed circuit boards.
On/Off time: LEDs light up immediately.
Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.
Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.
Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.
Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,0002,000 hours.
Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.
Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.
Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

Features:

Good quality materials:
AL6063 aluminium light housing.
good looking wigh plastic socket. insulated and safe plastic sochet.

Specifications:

WATTAGE: 9 watts
LED SOURCE / CHIP: Edison Chip
INPUT VOLTAGE: 110/220v AC
LUMEN: 420LM
LIGHT COLOR: Warm White
BEAM ANGLE: 60°
BASE TYPE: GU10
COLOR TEMPERATURE: 2800-3200K
LED QTY: 3
LIFE SPAN: 40,000 Hours
IP RATING: IP 20
RA INDEX:75
HOUSING: Grey
DIMENSIONS: See Image

10/09

LEDware Dimmable LED Spot Light GU10 Replacement Bulb - 240V, 6W (3x2W), 330Lm - Warm White SAA

LEDware Dimmable LED Spot Light GU10 Replacement Bulb 240V 6W (3x2W) 330Lm Warm White SAA

LED-SL-GU10WW-6WD

Description

LEDware LED Spotlights possess truly superb lighting quality and are an outstandingly efficient replacement for traditional incandescent bulbs.

Furthermore these LED lights will fit the majority of existing light fittings.

What are the immediate benefits of switching to LED lighting

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs
Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.
Efficiency: LEDs produce more light per watt than incandescent bulbs.
Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.
Size: LEDs can be very small and are easily populated onto printed circuit boards.
On/Off time: LEDs light up immediately.
Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.
Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.
Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.
Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,0002,000 hours.
Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.
Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.
Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

Specifications:

Voltage: AC200-240V
Colour: Warm White
CCT: 3000-3200K
LED: 3 x 2W Edison
Beam angle:6 00
RA INDEX: 75
IP RATING: IP 20
Size:50x60mm
Lumens:WW-330Lm
Dimmable: Yes

10/09

LEDware LED Spot Light GU10 Replacement Bulb - 240V, 6W (3x2W)m 330Lm - Warm White Non-Dimmable SAA

LEDware LED Spot Light GU10 Replacement Bulb 240V 6W (3x2W) 330Lm Warm White Non-Dimmable SAA

LED-SL-GU10WW-6W

Description

LEDware LED Spotlights possess truly superb lighting quality and are an outstandingly efficient replacement for traditional incandescent bulbs.

Furthermore these LED lights will fit the majority of existing light fittings.

What are the immediate benefits of switching to LED lighting?

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs
Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.
Efficiency: LEDs produce more light per watt than incandescent bulbs.
Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.
Size: LEDs can be very small and are easily populated onto printed circuit boards.
On/Off time: LEDs light up immediately.
Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.
Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.
Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.
Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,0002,000 hours.
Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.
Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.
Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

Specifications:

Voltage: AC200-240V

Colour: Warm White

CCT: 3000-3200K

LED: 3 x 2W Edison

Beam angle:600

RA INDEX:78

IP Rating: IP 20

Size:50x60mm

Lumens:WW-330Lm

10/09

LEDware LED High Bay Light Lamp Spare Reflector 60 Degree Aluminium

LEDware LED High Bay Light Lamp Spare Reflector 60° Aluminium

10/09

LEDware LED Spot Light GU10 Replacement Bulb - 240V, 9W (3x3W), 420Lm - Cool White Non-Dimmable SAA

LEDware LED Spot Light GU10 Replacement Bulb 240V 9W (3x3W) 420Lm Cool White Non-Dimmable SAA

LED-SL-GU10CW-9W

LEDware LED Spotlights possess truly superb lighting quality and are an outstandingly efficient replacement for traditional incandescent bulbs.

They can provide directional lighting to highlight features on a wall or as a decorative illumination of living space. LED Spotlights are free from UV radiation meaning no skin damage and no fading of furnishings – whether it be an oil painting or an antique chair.

The narrow flood bulbs use only 9W of energy to replace a 50W incandescent lamp (85% Energy Savings) and last 10x longer (40, 000 hours). These bulbs provide warm white light and excellent colour rendition and are the most environmentally friendly lighting solution available today.

Furthermore these LED lights will fit the majority of existing light fittings.

What are the immediate benefits of switching to LED lighting?

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs

Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.
Efficiency: LEDs produce more light per watt than incandescent bulbs.
Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.
Size: LEDs can be very small and are easily populated onto printed circuit boards.
On/Off time: LEDs light up immediately.
Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.
Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.
Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.
Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,000–2,000 hours.
Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.
Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.
Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

Features:

Good quality materials: AL6063 aluminium light housing. good looking wigh plastic socket. insulated and safe plastic sochet.

Specifications:

WATTAGE: 9 watts
LED SOURCE / CHIP: Edison Chip
INPUT VOLTAGE: 110/220v AC
LUMEN: 420LM
LIGHT COLOR: Cold White
BEAM ANGLE: 60°
BASE TYPE: GU10
COLOR TEMPERATURE: 2800-3200K
LED QTY: 3
LIFE SPAN: 40,000 Hours
IP RATING: IP 20
RA INDEX:75
HOUSING: Grey
DIMENSIONS: See Image

10/09

LEDware Dimmable LED Spot Light GU10 Replacement Bulb - 240V, 6W 3x2W), 360Lm - Cool White SAA

LEDware Dimmable LED Spot Light GU10 Replacement Bulb 240V 6W (3x2W) 360Lm Cool White SAA

LED-SL-GU10CW-6WD

Description

LEDware LED Spotlights possess truly superb lighting quality and are an outstandingly efficient replacement for traditional incandescent bulbs.

Furthermore these LED lights will fit the majority of existing light fittings.

What are the immediate benefits of switching to LED lighting?

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs
Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.
Efficiency: LEDs produce more light per watt than incandescent bulbs.
Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.
Size: LEDs can be very small and are easily populated onto printed circuit boards.
On/Off time: LEDs light up immediately.
Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.
Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.
Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.
Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,0002,000 hours.
Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.
Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.
Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

Specifications:

Voltage:AC200-240V

Colour:Cool White

CCT: 6000K

LED: 3 x 2W Edison

Beam angle:600

RA INDEX: 75

IP RATING: IP 20

Size: 50x60mm

Lumens:WW-330Lm

Dimmable: Yes

10/09

LEDware LED Spot Light GU10 Replacement Bulb - 240V, 6W (3x2W), 360Lm - Cool White Non-Dimmable SAA

LEDware LED Spot Light GU10 Replacement Bulb 240V 6W (3x2W) 360Lm Cool White Non-Dimmable SAA

LED-SL-GU10CW-6W

LEDware LED Spotlights possess truly superb lighting quality and are an outstandingly efficient replacement for traditional incandescent bulbs.

Furthermore these LED lights will fit the majority of existing light fittings.

What are the immediate benefits of switching to LED lighting?

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs
Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.
Efficiency: LEDs produce more light per watt than incandescent bulbs.
Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.
Size: LEDs can be very small and are easily populated onto printed circuit boards.
On/Off time: LEDs light up immediately.
Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.
Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.
Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.
Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,0002,000 hours.
Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.
Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.
Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

Specifications:

Voltage: AC200-240V

Colour: Cool White

CCT: 6000K

LED: 3 x 2W Edison

Beam angle: 600

RA INDEX: 78

IP Rating: IP 20

Size: 50x60mm

Lumens: WW-330Lm

10/09

LEDware Dimmable LED Spot Light MR16 Replacement Bulb - 12V, 6W(3x2W), 360Lm - Cool White Edison Chip SAA

LEDware Dimmable LED Spot Light MR16 Replacement Bulb 12V 6W(3x2W) 360Lm Cool White Edison Chip SAA

LEDware LED Spotlights possess truly superb lighting quality and are an outstandingly efficient replacement for traditional incandescent bulbs.

Furthermore these LED lights will fit the majority of existing light fittings.

What are the immediate benefits of switching to LED lighting?

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs
Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.
Efficiency: LEDs produce more light per watt than incandescent bulbs.
Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.
Size: LEDs can be very small and are easily populated onto printed circuit boards.
On/Off time: LEDs light up immediately.
Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.
Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.
Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.
Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,0002,000 hours.
Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.
Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.
Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

Specifications:

Voltage: 12V

Colour: Cool White

CCT: 6000K

LED: 3x2W Edison

Beam angle: 600

Size: 50 x 60mm

Lumens: WW-330lm

RA INDEX: 75

IP RATING: IP 20

10/09

LEDware Dimmable LED Spot Light GU10 Replacement Bulb - 240V, 9W (3x3W), 380Lm - Warm White SAA

LEDware Dimmable LED Spot Light GU10 Replacement Bulb 240V 9W (3x3W) 380Lm Warm White SAA

LED-SL-GU10WW-9WD

Description

LEDware LED Spotlights possess truly superb lighting quality and are an outstandingly efficient replacement for traditional incandescent bulbs.

They can provide directional lighting to highlight features on a wall or as a decorative illumination of living space. LED Spotlights are free from UV radiation meaning no skin damage and no fading of furnishings – whether it be an oil painting or an antique chair.
The narrow flood bulbs use only 9W of energy to replace a 50W incandescent lamp (85% Energy Savings) and last 10x longer (40, 000 hours). These bulbs provide warm white light and excellent colour rendition and are the most environmentally friendly lighting solution available today.

Furthermore these LED lights will fit the majority of existing light fittings.

What are the immediate benefits of switching to LED lighting?

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs

Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.

Efficiency: LEDs produce more light per watt than incandescent bulbs.

Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.

Size: LEDs can be very small and are easily populated onto printed circuit boards.

On/Off time: LEDs light up immediately.

Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.

Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.

Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.

Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete

failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,000–2,000 hours.

Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.

Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.

Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

Features:

Good quality materials
AL6063 aluminium light housing
good looking wigh plastic socket, insulated and safe plastic sochet.

Specifications:

Voltage: AC200-240V

Colour: Warm White

CCT: 3000K

LED: 3 x 3W Edison

Beam angle: 450

RA INDEX: 75

IP RATING: IP 20

Size: 50x90mm

Lumens: WW-380Lm

Life Spam: 40,000 Hours

IP Rating: IP 65

Housing: Grey

10/09

LEDware LED High Bay Light Lamp Spare Reflector 120 Degree Aluminium

LEDware LED High Bay Light Lamp Spare Reflector 120 Degree Aluminium

LED-HL-RF-120AL

10/09

LEDware LED High Bay Light Lamp - 240V, 80W, 7600Lm - Cool White Epistar Chip IP65 (Dual Box)

LEDware LED High Bay Light Lamp 240V 80W 7600Lm Cool White Epistar Chip IP65 (Dual Box)

LED-HL-CW-80W

Description

LED high bay lighting is typically used in industrial applications such as factories/ware houses. They can be used as a low power replacement for the 400W conventional mercury vapour high bays. Our high bays are 75% more energy efficient and decrease ongoing maintenance costs, making our fixtures the most cost effective and eco-friendly lighting solution.

What are the immediate benefits of switching to LED lighting?

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs
Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.
Efficiency: LEDs roduce more light per watt than incandescent bulbs.
Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.
Size: LEDs can be very small and are easily populated onto printed circuit boards.
On/Off time: LEDs light up immediately.
Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.
Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.
Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.
Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,0002,000 hours.
Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.
Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.
Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

Features:

Outstanding Efficiency
Comparable light output for up to 70% less power consumption.

Specifications:

WATTAGE: 80 watts
Equal to Normal Halide:400W
CHIP: Bridgelux
Voltage Input: AC85~260V 50-60Hz
Colour for the Housing: Black
Power Efficiency: >=87%,with life span over 40,000 hours
Total Harmonic Distortion: <=9 %
Power Factor (PF): Input voltage =AC100V, PF=0.99; Input voltage =AC220V, PF=0.95
Luminous Efficiency: 102
Luminous Flux (lm): 7600
Beam Angel: 120°
Weight (KG): 4.53
CCT: 6000K
Protection Grade: IP 65
RA INDEX:>75
Working Temperature: —40°C~+ 55°C/10%~95%RH
Storage Temperature: —25°C~+ 65°C

PACKAGING

Inner box (L,W,H): 38.5*27*26cm
Carton box (L,W,H): 56*41*28cm
Quantity/carton: 2
N.W per unit: 4.53kg
G.W per unit: 5.04kg
G.W per carton: 11.07kg

10/09

LEDware LED High Bay Light Lamp - 240V, 150W, 15000Lm - Cool White Bridgelux Chip IP65 (Dual Box)

LEDware LED High Bay Light Lamp 240V 150W 15000Lm Cool White Bridgelux Chip IP65 (Dual Box)

LED-HL-CW-150W

Description

LED high bay lighting is typically used in industrial applications such as factories/ware houses. They can be used as a low power replacement for the 700W conventional mercury vapour high bays. Our high bays are 75% more energy efficient and decrease ongoing maintenance costs, making our fixtures the most cost effective and eco-friendly lighting solution.