LED-DL-WW-9W-WT

 

This kit includes: 1 x 9watt (3x3watt) Everlight LED Downlight fixture; 240 volt constant current LED driver; and wiring required for installation. It comes complete and ready to install.

 

Featuring warm white (2800K to 3500K) colour and boasting a lifetime of 20-25 years in normal home environments, these LED Downlights operate efficiently saving you up to 80% on your electricity costs.

 

As LED Downlights are not vibration sensitive, nor do they have a light source that requires replacement, an extremely long life cycle is guaranteed and thus additional savings on maintenance is an added bonus. Furthermore, LED Downlights function at a fraction of the temperature of conventional downlights and are thus, considerably safer.

 

Featuring 100% aluminium housing and containing no hazardous materials, these downlights also comply with CE, ROHS, and Australian C-tick.

 

What are the immediate benefits of switching to LED lighting?

 

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

 

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs

 

Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.

 

Efficiency: LEDs produce more light per watt than incandescent bulbs.

 

Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.

 

Size: LEDs can be very small and are easily populated onto printed circuit boards.

 

On/Off time: LEDs light up immediately.

 

Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.

 

Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.

 

Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.

 

Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,000–2,000 hours.

 

Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.

 

Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.

 

Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

 

Dimmable:Dimmable LED lamps are specially designed so that they can be dimmed using a dimmer switch.Dimming allows the brightness of the lamp to be altered and can be very useful when you want to vary the intensity of light in a room.

LED SOURCE / CHIP: OSRAM Chip
POWER CONSUMPTION: 9 watts
INPUT VOLTAGE: AC 200v to 240v
OPERATING TEMP: -35 to +45 degrees
LUMEN: 450Lm
LIGHT COLOR: Warm White
BEAM ANGLE: 30 degrees
CCT(K):3000
RA Index:70-80
IP Rating:IP20
VIEWING ANGLE: Adjustable
DRIVER: Australian Certified High Quality LED Driver
DIMMABLE: No
 
PACKING

This kit includes: 1 x 9watt (3x3watt) Everlight LED Downlight fixture; 240 volt constant current LED driver; and wiring required for installation. It comes complete and ready to install.

 

Featuring warm white (2800K to 3500K) colour and boasting a lifetime of 20-25 years in normal home environments, these LED Downlights operate efficiently saving you up to 80% on your electricity costs.

 

As LED Downlights are not vibration sensitive, nor do they have a light source that requires replacement, an extremely long life cycle is guaranteed and thus additional savings on maintenance is an added bonus. Furthermore, LED Downlights function at a fraction of the temperature of conventional downlights and are thus, considerably safer.

 

Featuring 100% aluminium housing and containing no hazardous materials, these downlights also comply with CE, ROHS, and Australian C-tick.

 

What are the immediate benefits of switching to LED lighting?

 

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

 

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs

 

Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.

 

Efficiency: LEDs produce more light per watt than incandescent bulbs.

 

Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.

 

Size: LEDs can be very small and are easily populated onto printed circuit boards.

 

On/Off time: LEDs light up immediately.

 

Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.

Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.

 

Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.

 

Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,000–2,000 hours.

 

Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.

 

Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.

 

Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

 

Dimmable: Dimmable LED lamps are specially designed so that they can be dimmed using a dimmer switch. Dimming allows the brightness of the lamp to be altered and can be very useful when you want to vary the intensity of light in a room.

 

 

 

LED SOURCE / CHIP: OSRAM Chip
POWER CONSUMPTION: 9 watts
INPUT VOLTAGE: AC 200v to 240v
OPERATING TEMP: -35 to +45 degrees
LUMEN: 450Lm
LIGHT COLOR: Warm White
BEAM ANGLE: 30 degrees
CCT(K):3000
Ra Index:70-80
IP Rating:IP20
VIEWING ANGLE: Adjustable
DRIVER: Australian Certified High Quality LED Driver
DIMMABLE: Yes-fits Clipsal and Arlec universal dimmers

 
PACKING:

 

Box dimension: 100mm(L) x 102mm(W) x 126mm(H)

 

LED-DL-WW-9WD

 

This kit includes: 1 x 9watt (3x3watt) Everlight LED Downlight fixture; 240 volt constant current LED driver; and wiring required for installation. It comes complete and ready to install.

 

Featuring warm white (2800K to 3500K) colour and boasting a lifetime of 20-25 years in normal home environments, these LED Downlights operate efficiently saving you up to 80% on your electricity costs.

 

As LED Downlights are not vibration sensitive, nor do they have a light source that requires replacement, an extremely long life cycle is guaranteed and thus additional savings on maintenance is an added bonus. Furthermore, LED Downlights function at a fraction of the temperature of conventional downlights and are thus, considerably safer.

 

Featuring 100% aluminium housing and containing no hazardous materials, these downlights also comply with CE, ROHS, and Australian C-tick.

 

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

 

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs
Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.
Efficiency: LEDs produce more light per watt than incandescent bulbs.
Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.
Size: LEDs can be very small and are easily populated onto printed circuit boards.
On/Off time: LEDs light up immediately.
Dimmable: Dimming saves energy while setting the right light level to improve mood and ambiance.
Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.
Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.
Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.
Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,000–2,000 hours.
Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.
Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.
Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

 

 

LED SOURCE / CHIP: OSRAM
POWER CONSUMPTION: 9 watts
INPUT VOLTAGE: AC 200v to 240v
OPERATING TEMP: -35 to +45 degrees
LUMEN: 450Lm
LIGHT COLOR: Warm White
BEAM ANGLE: 30 degrees
VIEWING ANGLE: Adjustable
CCT(K):3000
RA Index:70-80
IP Rating:IP20
DRIVER: Australian Certified High Quality LED Driver
DIMMABLE: Yes - fits Clipsal and Arlec universal dimmers

 

 

This kit includes:1 x 9watt (3x3watt) Everlight LED Downlight fixture; 240 volt constant current LED driver; and wiring required for installation. It comes complete and ready to install.

 

Featuring warm white (2800K to 3500K) colour and boasting a lifetime of 20-25 years in normal home environments, these LED Downlights operate efficiently saving you up to 80% on your electricity costs.

As LED Downlights are not vibration sensitive, nor do they have a light source that requires replacement, an extremely long life cycle is guaranteed and thus additional savings on maintenance is an added bonus. Furthermore, LED Downlights function at a fraction of the temperature of conventional downlights and are thus, considerably safer.

Featuring 100% aluminium housing and containing no hazardous materials, these downlights also comply with CE, ROHS, and Australian C-tick.

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs

 

Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.

 

Efficiency: LEDs produce more light per watt than incandescent bulbs.

 

Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.

 

Size: LEDs can be very small and are easily populated onto printed circuit boards.

 

On/Off time: LEDs light up immediately.

 

Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.

 

Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.

 

Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.

 

Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,000–2,000 hours.

 

Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.

 

Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.

 

Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

 

 

LED SOURCE / CHIP: OSRAM Chip

POWER CONSUMPTION: 9 watts

INPUT VOLTAGE: AC 200v to 240v

OPERATING TEMP: -35 to +45 degrees

LUMEN: 450Lm

LIGHT COLOR: Warm White

BEAM ANGLE: 30 degrees

CCT(K):3000

Ra Index:70-80

IP Rating:IP20

VIEWING ANGLE: Adjustable

DRIVER: Australian Certified High Quality LED Driver

DIMMABLE: No
 
PACKING:
 
Box dimension: 100mm(L) x 102mm(W) x 126mm(H)

 

LEDware

 

This panel lamp series is applicable for a wide range of lighting places, it mainly suitable for indoor commercial lighting, such as hotels, shopping malls, residential places and ornament lightings,it has the characteristic of modern lighting and can be dotted to heighten the atmosphere, to improve the lighting environment and to promote personal taste in lighting.
What are the immediate benefits of switching to LED lighting?
This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs

 

Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.

 

Efficiency: LEDs produce more light per watt than incandescent bulbs.

 

Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.

Size: LEDs can be very small and are easily populated onto printed circuit boards.

 

On/Off time: LEDs light up immediately.

 

Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.

 

Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.

 

Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.

 

Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,000–2,000 hours.

 

Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.

 

Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.

 

Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

 

LED-DL-CW-9W-WT

 

This kit includes: 1 x 9watt (3x3watt) Everlight LED Downlight fixture; 240 volt constant current LED driver; and wiring required for installation. It comes complete and ready to install.

 

Featuring warm white (2800K to 3500K) colour and boasting a lifetime of 20-25 years in normal home environments, these LED Downlights operate efficiently saving you up to 80% on your electricity costs.

 

As LED Downlights are not vibration sensitive, nor do they have a light source that requires replacement, an extremely long life cycle is guaranteed and thus additional savings on maintenance is an added bonus. Furthermore, LED Downlights function at a fraction of the temperature of conventional downlights and are thus, considerably safer.

 

Featuring 100% aluminium housing and containing no hazardous materials, these downlights also comply with CE, ROHS, and Australian C-tick.

 

What are the immediate benefits of switching to LED lighting?

 

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

 

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs

 

Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.

 

Efficiency: LEDs produce more light per watt than incandescent bulbs.

 

Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.

 

Size: LEDs can be very small and are easily populated onto printed circuit boards.

 

On/Off time: LEDs light up immediately.

 

Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.

 

Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.

 

Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.

 

Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,000–2,000 hours.

 

Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.

 

Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.

 

Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

 

 

 

POWER CONSUMPTION: 9 watts
INPUT VOLTAGE: AC 200v to 240v
OPERATING TEMP:-35 to +45 degrees
LUMEN:500Lm
LIGHT COLOR:Cool White
BEAM ANGLE: 30degrees
CCT(K):6000
RA Index:70-80
IP Rating:IP20
VIEWING ANGLE: Adjustable
DRIVER: Australian Certified High Quality LED Driver
DIMMABLE: No

 

Box dimension: 100mm(L) x102mm(W) x 126mm(H)

 

 

This kit includes: 1 x 9watt (3x3watt) Everlight LED Downlight fixture; 240 volt constant current LED driver; and wiring required for installation. It comes complete and ready to install.

Featuring cool white colour and boasting a lifetime of 20-25 years in normal home environments, these LED Downlights operate efficiently saving you up to 80% on your electricity costs.

As LED Downlights are not vibration sensitive, nor do they have a light source that requires replacement, an extremely long life cycle is guaranteed and thus additional savings on maintenance is an added bonus. Furthermore, LED Downlights function at a fraction of the temperature of conventional downlights and are thus, considerably safer.

Featuring 100% aluminium housing and containing no hazardous materials, these downlights also comply with CE, ROHS, and Australian C-tick.

 

 

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs

 

Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.

 

Efficiency: LEDs produce more light per watt than incandescent bulbs.

 

Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.

Size: LEDs can be very small and are easily populated onto printed circuit boards.

 

On/Off time: LEDs light up immediately.

 

Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.

 

Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.

 

Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.

 

Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,0002,000 hours.

 

Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.

 

Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.

 

Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.
Dimmable:Dimmable LED lamps are specially designed so that they can be dimmed using a dimmer switch.Dimming allows the brightness of the lamp to be altered and can be very useful when you want to vary the intensity of light in a room.

 

Dimmable: Dimmable LED lamps are specially designed so that they can be dimmed using a dimmer switch. Dimming allows the brightness of the lamp to be altered and can be very useful when you want to vary the intensity of light in a room.

 

APPLICATIONS:

 

 

LED SOURCE / CHIP: OSRAM Chip
POWER CONSUMPTION: 9 watts
INPUT VOLTAGE: AC 200v to 240v
OPERATING TEMP: -35 to +45 degrees
LUMEN: 450Lm
LIGHT COLOR: Cool White
BEAM ANGLE: 30 degrees
CCT(K):6000
Ra Index:70-80
IP Rating:IP20
VIEWING ANGLE: Adjustable
DRIVER: Australian Certified High Quality LED Driver
DIMMABLE: Yes-fits Clipsal and Arlec universal dimmers

PACKING:

Box dimension: 100mm(L) x 102mm(W) x 126mm(H)

 

This kit includes: 1 x 9watt (3x3watt) Everlight LED Downlight fixture; 240 volt constant current LED driver; and wiring required for installation. It comes complete and ready to install.

 

Featuring cool white colour and boasting a lifetime of 20-25 years in normal home environments, these LED Downlights operate efficiently saving you up to 80% on your electricity costs.

 

As LED Downlights are not vibration sensitive, nor do they have a light source that requires replacement, an extremely long life cycle is guaranteed and thus additional savings on maintenance is an added bonus. Furthermore, LED Downlights function at a fraction of the temperature of conventional downlights and are thus, considerably safer.

 

Featuring 100% aluminium housing and containing no hazardous materials, these downlights also comply with CE, ROHS, and Australian C-tick.

 

 

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

 

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs

 

Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.

 

Efficiency: LEDs produce more light per watt than incandescent bulbs.

 

Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.

 

Size: LEDs can be very small and are easily populated onto printed circuit boards.

 

On/Off time: LEDs light up immediately.

 

Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.

 

Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.

 

Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.

 

Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,000–2,000 hours.

 

Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.

 

Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.

 

Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

 

Dimmable: Dimmable LED lamps are specially designed so that they can be dimmed using a dimmer switch. Dimming allows the brightness of the lamp to be altered and can be very useful when you want to vary the intensity of light in a room.

 

LED SOURCE / CHIP: OSRAM Chip
POWER CONSUMPTION: 9 watts
INPUT VOLTAGE: AC 200v to 240v
OPERATING TEMP: -35 to +45 degrees
LUMEN: 500Lm
LIGHT COLOR: Cold White
BEAM ANGLE: 30 degrees
CCT(K):6000
RA INDEX:70-80
IP Rating:IP20
VIEWING ANGLE: Adjustable
DRIVER: Australian Certified High Quality LED Driver
DIMMABLE: Yes-fits Clipsal and Arlec universal dimmers
 
PACKING:

 

Box dimension: 100mm(L) x 102mm(W) x 126mm(H)

This kit includes: 1 x 9watt (3x3watt) Everlight LED Downlight fixture; 240 volt constant current LED driver; and wiring required for installation. It comes complete and ready to install.

 

Featuring warm white (2800K to 3500K) colour and boasting a lifetime of 20-25 years in normal home environments, these LED Downlights operate efficiently saving you up to 80% on your electricity costs.

 

As LED Downlights are not vibration sensitive, nor do they have a light source that requires replacement, an extremely long life cycle is guaranteed and thus additional savings on maintenance is an added bonus. Furthermore, LED Downlights function at a fraction of the temperature of conventional downlights and are thus, considerably safer.

 

Featuring 100% aluminium housing and containing no hazardous materials, these downlights also comply with CE, ROHS, and Australian C-tick.

 

What are the immediate benefits of switching to LED lighting?

 

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

 

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs

 

Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.

 

Efficiency: LEDs produce more light per watt than incandescent bulbs.

 

Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.

 

Size: LEDs can be very small and are easily populated onto printed circuit boards.

 

On/Off time: LEDs light up immediately.

 

Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.

 

Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.

 

Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.

 

Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,000–2,000 hours.

 

Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.

 

Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.

 

Toxicity: LEDs do not contain mercury, unlike fluorescent lamps

 

APPLICATIONS:

 

 

This panel lamp series is applicable for a wide range of lighting places, it mainly suitable for indoor commercial lighting, such as hotels, shopping malls, residential places and ornament lightings,it has the characteristic of modern lighting and can be dotted to heighten the atmosphere, to improve the lighting environment and to promote personal taste in lighting.

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:
Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs

 

Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.

 

Efficiency: LEDs produce more light per watt than incandescent bulbs.

 

Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.

 

Size: LEDs can be very small and are easily populated onto printed circuit boards.

 

On/Off time: LEDs light up immediately.

 

Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.

 

Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.

 

Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.

 

Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,000–2,000 hours.

 

Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.

 

Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.

 

Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

 

 

 

The lamp-post use the silica gel that easy to adjustable

Three points connection moving

Pucker funtion save your more roomage .

Adjustable lamp shade with free turning directions

Bran - new ABS material wigh high impact and high intensity,stability more better,colour and lustre more luxuriant.

Frie - new built-in ionizer with protecting our eyes function for your work and study pleasure

Peaceful and stable lamp with high electron ballast without flicker.High frequency lighting which removes your eye's fatigue and protecting our eyes.

No Glare, No Ghosting, No Flicker, No Radiation, High Brightness & Pollution-free

 

 

Item size:L210mm×W100mm×H350mm
Box size: L110mm×W110mm×H325mm
Material: ABS
Lighting source: LED, contain 14 LEDs (5630 liming)
Switch: dimmable touch switch
Power: DC power 500mA
Luminance: 30cm ,1200Lux

LED-DESKP-5WD-RD

 

 

 

The lamp-post use the silica gel that easy to adjustable
Three points connection moving
Pucker funtion save your more roomage .
Adjustable lamp shade with free turning directions
Bran - new ABS material wigh high impact and high intensity,stability more better,colour and lustre more luxuriant.
Frie - new built-in ionizer with protecting our eyes function for your work and study pleasure
Peaceful and stable lamp with high electron ballast without flicker.High frequency lighting which removes your eye's fatigue and protecting our eyes.
No Glare, No Ghosting, No Flicker, No Radiation, High Brightness & Pollution-free

 

 

 

 

LED-BL-E27WW-8W

 

LEDware LED Light Bulbs possess truly superb lighting quality and are an outstandingly efficient replacement for traditional incandescent bulbs.

 

3W LEDs replace 25W incandescent; 5/6W LEDs replace 40W incandescent; 7W LEDs replace 50W incandescent; 9W LEDs replace 60W incandescent and 10W LEDs replace 75W incandescent all with energy savings of between 80-90%.

 

They are free from flickering, RF interference, UV radiation and mercury and start softly and instantly without extra downtime. They also possess excellent heat dissipation and are compliant with CE & RoHS.

 

Furthermore these LED lights will fit the majority of existing light fittings.

 

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

 

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs
Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.
Efficiency: LEDs produce more light per watt than incandescent bulbs.
Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.
Size: LEDs can be very small and are easily populated onto printed circuit boards.
On/Off time: LEDs light up immediately.
Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.
Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.
Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.
Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,000–2,000 hours.
Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.
Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.
Toxicity: LEDs do not contain mercury, unlike fluorescent lamps

 

Chip: Epistar
Colour: Warm White
Wattage: 7.5W
Lumens(lm):540lm
Input Voltage:240V
Fitting:E27
CCT(K):3000
Angle:155°
RA Index:>80
IP Rating:IP 20

 

LED-BL-E27WW-5WE

 

Description

 

LEDware LED Light Bulbspossess truly superb lighting quality and are an outstandingly efficient replacement for traditional incandescent bulbs.

 

3W LEDs replace 25W incandescent; 5/6W LEDs replace 40W incandescent; 7W LEDs replace 50W incandescent; 9W LEDs replace 60W incandescent and 10W LEDs replace 75W incandescent all with energy savings of between 80-90%.

 

They are free from flickering, RF interference, UV radiation and mercury and start softly and instantly without extra downtime. They also possess excellent heat dissipation and are compliant with CE & RoHS.

 

Furthermore these LED lights will fit the majority of existing light fittings.

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

 

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs
Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.
Efficiency: LEDs produce more light per watt than incandescent bulbs.
Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.
Size: LEDs can be very small and are easily populated onto printed circuit boards.
On/Off time: LEDs light up immediately.
Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.
Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.
Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.
Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,000–2,000 hours.
Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.
Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.
Toxicity: LEDs do not contain mercury, unlike fluorescent lamps

 

Name:		5W hollow bulb		Connector		E27
Power:		5w		Size:		60*110
Flux:		400lm		IP Code:		IP25
Color temperature:		3000K		Lamp color:		White
Lifespan:		35,000~40,000hrs		Input voltage:		AC85~265V
Heat sink		AL		Beam angle		120
Working temperature		-10~35		CRI		>70

 

LED-BL-E27WW-5W

LEDware LED Light Bulbs possess truly superb lighting quality and are an outstandingly efficient replacement for traditional incandescent bulbs.

3W LEDs replace 25W incandescent; 5/6W LEDs replace 40W incandescent; 7W LEDs replace 50W incandescent; 9W LEDs replace 60W incandescent and 10W LEDs replace 75W incandescent all with energy savings of between 80-90%.
They are free from flickering, RF interference, UV radiation and mercury and start softly and instantly without extra downtime. They also possess excellent heat dissipation and are compliant with CE & RoHS.
Furthermore these LED lights will fit the majority of existing light fittings.

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs
Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.
Efficiency: LEDs produce more light per watt than incandescent bulbs.
Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.
Size: LEDs can be very small and are easily populated onto printed circuit boards.
On/Off time: LEDs light up immediately.
Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.
Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.
Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.
Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,000–2,000 hours.
Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.
Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.
Toxicity: LEDs do not contain mercury, unlike fluorescent lamps

 

Chip: Epistar

Colour: Warm White

Wattage:5W

Lumens(lm):340lm

Input Voltage:240V

Fitting:E27

CCT(K):3000

Angle:155

RA Index:>80

IP Rating:IP 20

LED-TL-T8NW-10WN

 

LED tubes are designed to replace standard fluorescent tubes. They emit a cool white light whilst also reducing power consumption which in turn, saves money.

The physical glass tube used in traditional fluorescent tubes has been replaced by a more robust plastic composition making these LED tubes considerably safer.

9W LED tubes replace 18W standard fluorescents and 18W LED tubes replace 36W standard fluorescents and are available in both 600mm and 1200mm lengths.

These tubes can be used as a replacement for standard fluorescent tubes and the only thing to do is to remove the starter before put new tube.

A LED starter is included in the tube package and spare LED starters are available to be purchased separately.

 

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

Electrical parameter (Temperature=25C)

Length	Part No.	Voltage(V AC)	Operating Frequency (Hz)	Input Current(A)	Rated power(W)	Efficiency
0.6m	LED-TL-T8NW-10WN	100-240	50/60	0.04*	10*	>80%*

* Test condition:220V/50HZ

  

 

 

LEDware LED Spotlights possess truly superb lighting quality making them an outstandingly efficient replacement for traditional incandescent bulbs.

They can provide directional lighting to highlight features on a wall or as a decorative illumination of living space. LED Spotlights are free from UV radiation meaning no skin damage and no fading of furnishings – whether it be an oil painting or an antique chair.

The narrow flood bulbs use only 9W of energy to replace a 50W incandescent lamp (85% Energy Savings) and last 10x longer (40, 000 hours). These bulbs provide warm white light and excellent colour rendition and are the most environmentally friendly lighting solution available today.

Furthermore these LED lights will fit the majority of existing light fittings.

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

 

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs

Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.

Efficiency: LEDs produce more light per watt than incandescent bulbs.

Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.

Size: LEDs can be very small and are easily populated onto printed circuit boards.

On/Off time: LEDs light up immediately.

Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.

Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.

Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.

Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,0002,000 hours.

Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.

Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.

Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

 

 

Light source is high power LED with high luminous efficiency.
Wide input voltage from AC110V to 240V, with low power consumption and energy saver.
This product is environmental friendly, containing no flash strobe and radiation, as well as UV and infrared rays.
CCT: 4543K.
Standard E26/E27 socket.
In accordance with the RoHS.
With convenient installation, this product can be widely used in exhibition hall, jewelry shop,shopping malls, hotel, etc.

 

 

LEDware LED Spotlights possess truly superb lighting quality making them an outstandingly efficient replacement for traditional incandescent bulbs.

They can provide directional lighting to highlight features on a wall or as a decorative illumination of living space. LED Spotlights are free from UV radiation meaning no skin damage and no fading of furnishings – whether it be an oil painting or an antique chair.

The narrow flood bulbs use only 9W of energy to replace a 50W incandescent lamp (85% Energy Savings) and last 10x longer (40, 000 hours). These bulbs provide warm white light and excellent colour rendition and are the most environmentally friendly lighting solution available today.

Furthermore these LED lights will fit the majority of existing light fittings.

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

 

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs

Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.

Efficiency: LEDs produce more light per watt than incandescent bulbs.

Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.

Size: LEDs can be very small and are easily populated onto printed circuit boards.

On/Off time: LEDs light up immediately.

Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.

Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.

Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.

Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,0002,000 hours.

Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.

Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.

Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

 

 

 

Light source is high power LED with high luminous efficiency.
DC12V input voltage, with low power consumption and energy saver.
This product is environmental friendly, containing no flash strobe and radiation, as well as UV and infrared rays.
CCT:2700K-3700K.
Standard GU5.3 socket.
In accordance with the RoHS.

 

Light source:High power LED
Chip: Epistar
Voltage:AC/DC12V
Wattage:3W
Forward current:330mA
Operating Temp:-20~400C
Storage Temp:-40~800C
Median life Expentancy:30,000hrs(TA:250C) 10,000hrs(TA:500C)
Viewing angle:30 Deg
CCT:2700-3700K
Luminous flux:250lm
Colour rendering index(Ra) >=70
IP Rating: IP 20
700 lux (1m) 170lux (2m) 80 lux (3m)

LEDware LED Spotlights possess truly superb lighting quality making them an outstandingly efficient replacement for traditional incandescent bulbs.

They can provide directional lighting to highlight features on a wall or as a decorative illumination of living space. LED Spotlights are free from UV radiation meaning no skin damage and no fading of furnishings – whether it be an oil painting or an antique chair.

The narrow flood bulbs use only 9W of energy to replace a 50W incandescent lamp (85% Energy Savings) and last 10x longer (40, 000 hours). These bulbs provide warm white light and excellent colour rendition and are the most environmentally friendly lighting solution available today.

Furthermore these LED lights will fit the majority of existing light fittings.

 

This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

 

Cost Saving:LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs
 

Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.
 

Efficiency:LEDs produce more light per watt than incandescent bulbs.
 

Colour:LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.
 

Size:LEDs can be very small and are easily populated onto printed circuit boards.
 

On/Off time:LEDs light up immediately.
 

Cycling:LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.

Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.

Slow failure:LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.
 

Lifetime:LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,0002,000 hours.
 

Shock resistance:LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.

Focus:The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.
 

Toxicity:LEDs do not contain mercury, unlike fluorescent lamps.

 

 

Light source is high power LED with high luminous efficiency.
DC12V input voltage, with low power consumption and energy saver.
This product is environmental friendly, containing no flash strobe and radiation, as well as UV and infrared rays.
CCT:5500K-7500K.
Standard GU5.3 socket.
In accordance with the RoHS.

 

 

LEDware LED Light Bulbs possess truly superb lighting quality and are an outstandingly efficient replacement for traditional incandescent bulbs.
3W LEDs replace 25W incandescent; 5/6W LEDs replace 40W incandescent; 7W LEDs replace 50W incandescent; 9W LEDs replace 60W incandescent and 10W LEDs replace 75W incandescent all with energy savings of between 80-90%.
They are free from flickering, RF interference, UV radiation and mercury and start softly and instantly without extra downtime. They also possess excellent heat dissipation and are compliant with CE & RoHS.
Furthermore these LED lights will fit the majority of existing light fittings.
What are the immediate benefits of switching to LED lighting?
This revolutionary leap in technology is poised to redefine the future of Australian lighting, saving you money while also benefitting the environment. Read on for a list of immediate benefits:

 

Cost Saving: LED lights run on 90% less energy than standard halogen lights which equates to massive savings on electricity bills which are often comprised of 50% lighting costs
Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.
Efficiency: LEDs produce more light per watt than incandescent bulbs.
Colour: LEDs can emit light of an intended colour without the use of colour filters required in traditional lighting methods. This is more efficient and will lower on-going costs.
Size: LEDs can be very small and are easily populated onto printed circuit boards.
On/Off time: LEDs light up immediately.
Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, as opposed to fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.
Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.
Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.
Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,000–2,000 hours.
Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, as opposed to fluorescent and incandescent bulbs which are fragile.
Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.
Toxicity: LEDs do not contain mercury, unlike fluorescent lamps

 

Input Voltage: AC85~265V 50/60Hz
 
Chip: Samsung
 
CCT(K):3000
 
Angle:155°
 
RA Index: >80
 
IP Rating:IP 20