Suit 20” to 29” sets up to 75kgs. Maximum width 810mm, maximum height 660mm.

These brackets must be fixed securely to a substantial load bearing structure with the appropriate fixings. The design of the bracket allows for adjustment both vertically and horizontally. Suitable for use in clubs, airports, hotels, retail stores, hospitals, etc.

These brackets must be fixed securely to a substantial load bearing structure with the appropriate fixings.
Suits 20” - 29" (50cm - 73cm) TV sets with a maximum load capacity of 75kgs. Maximum width 810mm, maximum height 660mm

Suits 14” to 20” sets up to 30kg. Maximum width 530mm, maximum height 500mm.

These brackets must be fixed securely to a substantial load bearing structure with the appropriate fixings. The design of the bracket allows for adjustment both vertically and horizontally. Suitable for use in clubs, airports, hotels, retail stores, hospitals, etc.

These brackets must be fixed securely to a substantial load bearing structure with the appropriate fixings.
Suits 14” - 20" (35cm - 50cm) TV sets with a maximum load capacity of 35kgs. Maximum width 530mm, maximum height 500mm.

A fuseable alloy sometimes referred to as ‘Wood’s metal’. It is a unique alloy blend designed to melt at a very low temperature (70°C) for creation of custom metal parts. It is very malleable which allows easy customisation. May be used to create custom modelling parts, brackets, handles, joints or even to create a mould. Can be filed, cut, drilled or machined as required. Approx 200gm.

Supplied in granular form, Polymorph is an amazing modelling plastic that is hard and tough at room temperature, but can be moulded into any shape simply by heating it in hot water. When fully cooled, it is similar in physical properties to nylon. It may be moulded and re-moulded multiple times simply by re heating in hot water. May be used to create custom modelling parts, brackets, handles, joints or even to create a mould. Dries white and can be filed, cut, drilled or machined as required.

Rating: 470uh
Max Current Rating: 0.34A
DC Resistance: 1.96 Ohms

Rating: 470uh
Max Current Rating: 0.34A
DC Resistance: 1.96 Ohms

Rating: 330uh
Max Current Rating: 0.40A
DC Resistance: 1.26 Ohms

Rating: 330uh
Max Current Rating: 0.40A
DC Resistance: 1.26 Ohms

Rating: 220uh
Max Current Rating: 0.49A
DC Resistance: 0.96 Ohms

Rating: 220uh
Max Current Rating: 0.49A
DC Resistance: 0.96 Ohms

Rating: 10uh
Max Current Rating: 2.3A
DC Resistance: 0.07 Ohms

Rating: 150uh
Max Current Rating: 0.58A
DC Resistance: 0.64 Ohms

Rating: 100uh
Max Current Rating: 0.72A
DC Resistance: 0.43 Ohms

Rating: 100uh
Max Current Rating: 0.72A
DC Resistance: 0.43 Ohms

Rating: 47uh
Max Current Rating: 1.1A
DC Resistance: 0.18 Ohms

Rating: 47uh
Max Current Rating: 1.1A
DC Resistance: 0.18 Ohms

Rating: 33uh
Max Current Rating: 1.2A
DC Resistance: 0.13 Ohms

Rating: 33uh
Max Current Rating: 1.2A
DC Resistance: 0.13 Ohms

Rating: 22uh
Max Current Rating: 1.5A
DC Resistance: 0.11 Ohms

Rating: 22uh
Max Current Rating: 1.5A
DC Resistance: 0.11 Ohms

Rating: 10uh
Max Current Rating: 2.3A
DC Resistance: 0.07 Ohms

Rating: 10uh
Max Current Rating: 2.3A
DC Resistance: 0.07 Ohms

The guitar preamp when combined with any amplifier will produce crystal clear guitar sound free of the usual hum and noise frequently experienced on commercially produced units. With options to expand the unit to two ore more channels , and add other effects , this project is ideal for the growing band or budding guitarist. This kit is a shortform kit (contains the electronics for the PCB and PCB for a single channel) of the 2- channel guitar amplifier project presented in Silicon Chip November 2000. 

2U deluxe rack mounting case (H 5036) for that ultra professional finish is recommended.

 

Features:

Level control Bass , Mid and Treble controls Master Volume Effects return control Balanced and unbalanced line outputs Headphone output Line and effects return inputs Effects send output Uses a minature 5VA E-core transformer (not supplied)

(SC July ‘96) Traditional graphic equalisers have fixed centre frequencies and bandwidths, allowing for level adjustments only. But, with this 3-band parametric equaliser you can select a centre frequency in low, mid, and high regions, and apply cut or boost over a selectable bandwidth in each band. It gives you incredible flexibility to tailor the sound of your system exactly the way you like it! Requires ±15V DC supply (see our K 3215). Two modules are required for a stereo equaliser.

Specifications

Signal to Noise Ratio: 99dB Unweighted Maximum Boost: ±10dB Maximum Output: 9.3V Range of Q: 0.45 to 5

(SC Dec '95) Liven up your keyboard, guitar or hi-fi system with this 5 band equaliser. Uses only a few low-cost parts and will vastly improve the versatility of your sound system. Ideal as an add-on to a pre-amplifier kit or as a stand-alone unit. Band centres at 63Hz, 250Hz, 1kHz, 4kHz and 16kHz with a ±12dB boost/cut adjustable level on each band. Requires 15-0-15 transformer power supply (M 2855L).

Primary fitted with 200mm fly leads. Secondary taps have solder tags.

Specifications

Primary voltage: 240V AC Total VA rating: 120VA Insulation: Class E (120°C) Magnetising current: <85mA Temperature rise: <65°C Regulation: ˜10% Recommended primary AC fuse: 500mA Weight: ˜2.2kg Primary connection: 200mm fly leads Secondary connection: Solder tags AS/NZS 61558.2.6 approval: Q042094 AS3108 approval: CS/990/Q

PDF Download:

Dimension Drawings

Note: Must be used with a standard 500mA external fuse.

Primary fitted with 200mm fly leads. Secondary taps have solder tags.

Specifications

Primary voltage: 240V AC Total VA rating: 120VA Insulation: Class E (120°C) Magnetising current: <85mA Temperature rise: <75°C Regulation: ˜10% Recommended primary AC fuse: 500mA Weight: ˜2.2kg Primary connection: 200mm fly leads Secondary connection: Solder tags AS/NZS 61558.2.6 approval: Q042028 AS3108 approval: CS/813/Q

Secondary Voltages Available:

Voltage : 12V Current : 8A* Voltage : 15V Current : 8A* Voltage : 24V Current : 4A Voltage : 27V Current : 4A Voltage : 30V Current : 4A *Max Current when connected in parallel

PDF Download:

Dimension Drawings

Note: Must be used with a standard 500mA external fuse.

Primary fitted with 200mm fly leads. Secondary taps have solder tags.

Specifications

Primary Voltage: 240V AC Total VA Rating: 100VA Insulation: Class E (120°C) Magnetising Current: <85mA Temperature Rise: <70°C Regulation: ˜14% Recommended primary AC Fuse: 500mA Weight: ˜1.6kg Primary connection: 200mm fly leads Secondary connection: Solder tags AS/NZS 61558.2.6 approval: Q042028 AS3108 approval: CS/813/Q

Secondary Voltages Available:

Voltage : 12V Current : 6A* Voltage : 15V Current : 6A* Voltage : 24V Current : 3A Voltage : 27V Current : 3A Voltage : 30V Current : 3A *Max Current when connected in parallel

PDF Download:

Dimension Drawings

Note: Must be used with a standard 500mA external fuse.

9-30V / 240V 60VA Transformer (EI Core)

Primary fitted with 150m fly leads.

 

Specifications

Primary voltage: 240V AC Total VA rating: 60VA Insulation: Class E (120°C) Magnetising current: <85mA Temperature rise: <65°C Regulation: Ü10% Recommended primary AC fuse: 500mA Weight: Ü1.4kg Connection: 200mm fly leads

Secondary Voltages Available:

Voltage : 9V Current : 5A* Voltage : 12V Current : 5A* Voltage : 15V Current : 2.5A Voltage : 18V Current : 2.5A Voltage : 21V Current : 2.5A  Voltage : 24V Current : 2.5A Voltage : 30 VCurrent : 2.5A  *Max Current when connected in parallel

Note: Must be used with a standard 500mA external fuse.

Primary fitted with 200mm fly leads. Secondary fitted with fly leads.

 

Specifications

Primary voltage: 240V AC Total VA rating: 72VA Insulation: Class E (120°C) Magnetising current: <85mA Temperature rise: <65°C Regulation: ˜10% Recommended primary AC fuse: 500mA Weight: ˜1.4kg Primary connection: 200mm fly leads Secondary connection: Solder tags AS/NZS 61558.2.6 approval: Q042028 AS3108 approval: CS/813/Q

Note: Must be used with a standard 500mA external fuse. All currents listed are AC.

Powertran EI-Core 240V AC mains transformer with 2A multi tapped secondary configuration. 0V, 6V, 9V, 12V and 15V secondaries are available at 2A current output. Primary is fitted with 200mm fly leads. Secondary taps have solder tags. Fully electrical authority approved for AS/NZS 61558.2.6.

Note:Must be used with a standard 500mA external fuse. All currents listed are AC.

• Specifications:
• Primary voltage: 240V AC
• Total VA rating: 30VA
• Insulation: Class E (120C)
• Magnetising current: <65mA
• Temperature rise: <60C
• Regulation: 10%
• Recommended primary AC fuse: 500mA
• Weight: 1kg
• Primary connection: 200mm fly leads
• Secondary connection: Solder tags

*Specifications are subject to change without notice.

Primary fitted with 200mm fly leads. Secondary taps have solder tags.

 

Specifications

Primary voltage: 240V AC Total VA rating: 15VA Insulation: Class E (120°C) Magnetising current: <60mA Temperature rise: <60°C Regulation: ˜10% Recommended primary AC fuse: 250mA Weight: ˜555g Primary connection: 200mm fly leads Secondary connection: Solder tags AS/NZS 61558.2.6 approval: Q042028 AS3108 approval: CS/813/Q

Note: Must be used with a standard 250mA external fuse. All currents listed are AC

Primary fitted with 200mm fly leads. Secondary taps have solder tags.

 

Specifications

Primary voltage: 240V AC Total VA rating: 18VA Insulation: Class E (120°C) Magnetising current: <65mA Temperature rise: <60°C Regulation: ˜10% Recommended primary AC fuse: 250mA Weight: ˜680g Primary connection: 200mm fly leads Secondary connection: Solder tags AS/NZS 61558.2.6 approval: Q042028 AS3108 approval: CS/813/Q

Note: Must be used with a standard 250mA external fuse. All currents listed are AC.

6.35mm insulated PCB mount stereo socket with DPDT switched contacts.
Mounting hole 11mmØ

6.35mm chassis mount insulated stereo socket with DPDT
isolated switch. Mounting hole 12mmØ. Insulated from chassis.

6.35mm PCB mount stereo socket with 3PST switched contacts. Insulated from Chassis. Mounting Hole 11mmØ

6.35mm chassis mount stereo socket with DPDT isolated switch. Mounting hole 9mmØ

6.35mm Pro Socket Chassis
4-7mm Cable Entry

6.35mm insulated chassis mount stereo socket with switched contacts. Mounting hole 11mmØ

6.35mm mono chassis mount socket with SPST contact switch.

6.35mm chassis mount stereo socket. Mounting hole 9mmØ

6.35mm chassis mount stereo socket with SPST Contact Switch.

6.35mm mono chassis mount socket with SPST contact switch.

Available in 5 sizes for small electronic circuits, jumper boxes or connection points. The two piece design incorporates two PCB mounting posts in the lid and a flanged base for fixing to wall, car chassis, boat etc.

Available in 5 sizes for small electronic circuits, jumper boxes or connection points. The two piece design incorporates two PCB mounting posts in the lid and a flanged base for fixing to wall, car chassis, boat etc.

Available in 5 sizes for small electronic circuits, jumper boxes or connection points. The two piece design incorporates two PCB mounting posts in the lid and a flanged base for fixing to wall, car chassis, boat etc.

High quality Hammond Manufacturing die cast boxes with flanged lid for easy mounting. These sturdy boxes offer a high degree of RFI shielding and are suitable for outdoor or automotive use. Incorporates internal raised lip and rubber gasket seal to provide IP65 level dust & moisture protection. All flange and lid holes are countersunk. Screws for fixing the lid and rubber sealing washers are supplied.

High quality Hammond Manufacturing die cast boxes with flanged lid for easy mounting. These sturdy boxes offer a high degree of RFI shielding and are suitable for outdoor or automotive use. Incorporates internal raised lip and rubber gasket seal to provide IP65 level dust & moisture protection. All flange and lid holes are countersunk. Screws for fixing the lid and rubber sealing washers are supplied.

High quality Hammond Manufacturing die cast boxes with flanged lid for easy mounting. These sturdy boxes offer a high degree of RFI shielding and are suitable for outdoor or automotive use. Incorporates internal raised lip and rubber gasket seal to provide IP65 level dust & moisture protection. All flange and lid holes are countersunk. Screws for fixing the lid and rubber sealing washers are supplied.

High quality Hammond Manufacturing die cast boxes with flanged lid for easy mounting. These sturdy boxes offer a high degree of RFI shielding and are suitable for outdoor or automotive use. Incorporates internal raised lip and rubber gasket seal to provide IP65 level dust & moisture protection. All flange and lid holes are countersunk. Screws for fixing the lid and rubber sealing washers are supplied.

High quality Hammond Manufacturing die cast boxes with flanged lid for easy mounting. These sturdy boxes offer a high degree of RFI shielding and are suitable for outdoor or automotive use. Incorporates internal raised lip and rubber gasket seal to provide IP65 level dust & moisture protection. All flange and lid holes are countersunk. Screws for fixing the lid and rubber sealing washers are supplied.

High quality Hammond Manufacturing die cast boxes with flanged lid for easy mounting. These sturdy boxes offer a high degree of RFI shielding and are suitable for outdoor or automotive use. Incorporates internal raised lip and rubber gasket seal to provide IP65 level dust & moisture protection. All flange and lid holes are countersunk. Screws for fixing the lid and rubber sealing washers are supplied.

Rugged extruded anodised aluminium enclosures with provision for PCBs to be mounted
horizontally via internal ribs. Available in either natural or black anodised finish. Includes two aluminum end panels and two black plastic bezels which may be left off the enclosure if not required. Perfect solution for industrial or agricultural applications, or wherever a sturdy long lasting enclosure is required. Optional mounting flanges available for permanent installations.

Rugged extruded anodised aluminium enclosures with provision for PCBs to be mounted
horizontally via internal ribs. Available in either natural or black anodised finish. Includes two aluminum end panels and two black plastic bezels which may be left off the enclosure if not required. Perfect solution for industrial or agricultural applications, or wherever a sturdy long lasting enclosure is required. Optional mounting flanges available for permanent installations.

Rugged extruded anodised aluminium enclosures with provision for PCBs to be mounted
horizontally via internal ribs. Available in either natural or black anodised finish. Includes two aluminum end panels and two black plastic bezels which may be left off the enclosure if not required. Perfect solution for industrial or agricultural applications, or wherever a sturdy long lasting enclosure is required. Optional mounting flanges available for permanent installations.

Rugged extruded anodised aluminium enclosures with provision for PCBs to be mounted
horizontally via internal ribs. Available in either natural or black anodised finish. Includes two aluminum end panels and two black plastic bezels which may be left off the enclosure if not required. Perfect solution for industrial or agricultural applications, or wherever a sturdy long lasting enclosure is required. Optional mounting flanges available for permanent installations.

Rugged extruded anodised aluminium enclosures with provision for PCBs to be mounted
horizontally via internal ribs. Available in either natural or black anodised finish. Includes two aluminum end panels and two black plastic bezels which may be left off the enclosure if not required. Perfect solution for industrial or agricultural applications, or wherever a sturdy long lasting enclosure is required. Optional mounting flanges available for permanent installations.

Rugged extruded anodised aluminium enclosures with provision for PCBs to be mounted
horizontally via internal ribs. Available in either natural or black anodised finish. Includes two aluminum end panels and two black plastic bezels which may be left off the enclosure if not required. Perfect solution for industrial or agricultural applications, or wherever a sturdy long lasting enclosure is required. Optional mounting flanges available for permanent installations.

Rugged extruded anodised aluminium enclosures with provision for PCBs to be mounted
horizontally via internal ribs. Available in either natural or black anodised finish. Includes two aluminum end panels and two black plastic bezels which may be left off the enclosure if not required. Perfect solution for industrial or agricultural applications, or wherever a sturdy long lasting enclosure is required. Optional mounting flanges available for permanent installations.

Rugged extruded anodised aluminium enclosures with provision for PCBs to be mounted
horizontally via internal ribs. Available in either natural or black anodised finish. Includes two aluminum end panels and two black plastic bezels which may be left off the enclosure if not required. Perfect solution for industrial or agricultural applications, or wherever a sturdy long lasting enclosure is required. Optional mounting flanges available for permanent installations.

Rugged extruded anodised aluminium enclosures with provision for PCBs to be mounted
horizontally via internal ribs. Available in either natural or black anodised finish. Includes two aluminum end panels and two black plastic bezels which may be left off the enclosure if not required. Perfect solution for industrial or agricultural applications, or wherever a sturdy long lasting enclosure is required. Optional mounting flanges available for permanent installations.

Hand held instrument enclosure moulded in ABS plastic. Features two piece lap joint construction. Provides protection against dust accumulation and splashing water. Includes front and rear removable panel.

Hand held instrument enclosure moulded in ABS plastic. Features two piece lap joint construction. Provides protection against dust accumulation and splashing water. Includes front and rear removable panel.

Miniature enclosures molded from ABS plastic. They feature a satin textured finish, 2 PCB
standoffs and a screw on lid. Adding a H 9006 key ring kit converts the enclosures into a miniature keyfob. Great for custom remote controls.

Miniature enclosures molded from ABS plastic. They feature a satin textured finish, 2 PCB standoffs and a screw on lid. Adding a H 9006 key ring kit converts the enclosures into a miniature keyfob. Great for custom remote controls.

Miniature enclosures molded from ABS plastic. They feature a satin textured finish, 2 PCB
standoffs and a screw on lid. Adding a H 9006 key ring kit converts the enclosures into a miniature keyfob. Great for custom remote controls.

Miniature enclosures molded from ABS plastic. They feature a satin textured finish, 2 PCB standoffs and a screw on lid. Adding a H 9006 key ring kit converts the enclosures into a miniature keyfob. Great for custom remote controls.

Miniature enclosures molded from ABS plastic. They feature a satin textured finish, 2 PCB
standoffs and a screw on lid. Adding a H 9006 key ring kit converts the enclosures into a miniature keyfob. Great for custom remote controls.

Miniature enclosures molded from ABS plastic. They feature a satin textured finish, 2 PCB standoffs and a screw on lid. Adding a H 9006 key ring kit converts the enclosures into a miniature keyfob. Great for custom remote controls.

Miniature enclosures molded from ABS plastic. They feature a satin textured finish, 2 PCB
standoffs and a screw on lid. Adding a H 9006 key ring kit converts the enclosures into a miniature keyfob. Great for custom remote controls.

Toroidal transformers provide a higher output compared to traditional E-I transformers of a similar physical size. They have substantially reduced radiated hum and electrical noise, generate less heat and have much better regulation making them ideal for high performance, low noise circuits.

The transformer is “potted” in an epoxy compound within a plastic housing. Configured with 2 x 120V primaries and 2 identical secondaries which can be wired in either series or parallel. Being PCB mount reduces assembly time as the transformer simply solders to the PCB. For extra stability and mechanical reliability the transformer can be secured to the PCB with a self tapping screw.

 

Specifications:

Sec. V: 15+15 Sec. Parallel: 2A Sec. Series: 1A Primary voltage: 2 x 120V AC Total VA rating: 10VA Insulation: Class A (105°C) Magnetising current: <20mA Temperature rise: <65°C Recommended AC Fuse: 100mA Regulation: ˜20% Weight: ˜210g PCB hole size: 1.2mm AS/NZS 61558.2.6 approval: Q99396 Note: Must be used with a standard 250mA external AC fuse.

Toroidal transformers provide a higher output compared to traditional E-I transformers of a similar physical size. They have substantially reduced radiated hum and electrical noise, generate less heat and have much better regulation making them ideal for high performance, low noise circuits.

The transformer is “potted” in an epoxy compound within a plastic housing. Configured with 2 x 120V primaries and 2 identical secondaries which can be wired in either series or parallel. Being PCB mount reduces assembly time as the transformer simply solders to the PCB. For extra stability and mechanical reliability the transformer can be secured to the PCB with a self tapping screw.

 

Specifications:

Sec. V: 12+12 Sec. Parallel: 2.5A Sec. Series: 1.2A Primary voltage: 2 x 120V AC Total VA rating: 10VA Insulation: Class A (105°C) Magnetising current: <20mA Temperature rise: <65°C Recommended AC Fuse: 100mA Regulation: ˜20% Weight: ˜210g PCB hole size: 1.2mm AS/NZS 61558.2.6 approval: Q99396 Note: Must be used with a standard 250mA external AC fuse.

Toroidal transformers provide a higher output compared to traditional E-I transformers of a similar physical size. They have substantially reduced radiated hum and electrical noise, generate less heat and have much better regulation making them ideal for high performance, low noise circuits.

The transformer is “potted” in an epoxy compound within a plastic housing. Configured with 2 x 120V primaries and 2 identical secondaries which can be wired in either series or parallel. Being PCB mount reduces assembly time as the transformer simply solders to the PCB. For extra stability and mechanical reliability the transformer can be secured to the PCB with a self tapping screw.

 

Specifications:

Sec. V: 9+9 Sec. Parallel: 3.3A Sec. Series: 1.6A Primary voltage: 2 x 120V AC Total VA rating: 10VA Insulation: Class A (105°C) Magnetising current: <20mA Temperature rise: <65°C Recommended AC Fuse: 100mA Regulation: ˜20% Weight: ˜210g PCB hole size: 1.2mm AS/NZS 61558.2.6 approval: Q99396 Note: Must be used with a standard 250mA external AC fuse.

Toroidal transformers provide a higher output compared to traditional E-I transformers of a similar physical size. They have substantially reduced radiated hum and electrical noise, generate less heat and have much better regulation making them ideal for high performance, low noise circuits.

The transformer is potted in an epoxy compound within a plastic housing. Configured with 2 x 120V primaries and 2 identical secondaries which can be wired in either series or parallel. Being PCB mount reduces assembly time as the transformer simply solders to the PCB. For extra stability and mechanical reliability the transformer can be secured to the PCB with a self tapping screw.




PCB Layout



Dimensions

• Primary voltage: 2 x 120V ac
• Secondary Voltage: 7.5 + 7.5
• Secondary Current: 4A Parallel, 2A Series
• Total VA rating: 30VA
• Insulation: Class A (105C)
• Magnetising current: <30mA
• Temperature rise: <65C
• External ac fuse: 250mA
• Regulation: 16%
• Weight: 450g
• PCB hole size: 2mm
• Thermal Fuse: Internal 115C
• AS/NZS 61558.2.6 approval: Q99396

*Specifications are subject to change without notice.

Toroidal transformers provide a higher output compared to traditional E-I transformers of a similar physical size. They have substantially reduced radiated hum and electrical noise, generate less heat and have much better regulation making them ideal for high performance, low noise circuits.

The transformer is “potted” in an epoxy compound within a plastic housing. Configured with 2 x 120V primaries and 2 identical secondaries which can be wired in either series or parallel. Being PCB mount reduces assembly time as the transformer simply solders to the PCB. For extra stability and mechanical reliability the transformer can be secured to the PCB with a self tapping screw.

 

Specifications:

Sec. V: 6+6 Sec. Parallel: 5A Sec. Series: 2.5A Primary voltage: 2 x 120V AC Total VA rating: 10VA Insulation: Class A (105°C) Magnetising current: <20mA Temperature rise: <65°C Recommended AC Fuse: 100mA Regulation: ˜20% Weight: ˜210g PCB hole size: 1.2mm AS/NZS 61558.2.6 approval: Q99396 Note: Must be used with a standard 250mA external AC fuse.

Toroidal transformers provide a higher output compared to traditional E-I transformers of a similar physical size. They have substantially reduced radiated hum and electrical noise, generate less heat and have much better regulation making them ideal for high performance, low noise circuits.

The transformer is “potted” in an epoxy compound within a plastic housing. Configured with 2 x 120V primaries and 2 identical secondaries which can be wired in either series or parallel. Being PCB mount reduces assembly time as the transformer simply solders to the PCB. For extra stability and mechanical reliability the transformer can be secured to the PCB with a self tapping screw.

 

Specifications

Sec. V: 12+12 Sec. Parallel: 0.8A Sec. Series: 0.4A Primary voltage: 2 x 120V AC Total VA rating: 10VA Insulation: Class A (105°C) Magnetising current: <20mA Temperature rise: <65°C Recommended AC Fuse: 100mA Regulation: ˜20% Weight: ˜210g PCB hole size: 1.2mm AS/NZS 61558.2.6 approval: Q99396 Note: Must be used with a standard 100mA external AC fuse

Toroidal transformers provide a higher output compared to traditional E-I transformers of a similar physical size. They have substantially reduced radiated hum and electrical noise, generate less heat and have much better regulation making them ideal for high performance, low noise circuits.

The transformer is potted in an epoxy compound within a plastic housing. Configured with 2 x 120V primaries and 2 identical secondaries which can be wired in either series or parallel. Being PCB mount reduces assembly time as the transformer simply solders to the PCB. For extra stability and mechanical reliability the transformer can be secured to the PCB with a self tapping screw.




PCB Layout



Dimensions

• Sec. V: 9+9
• Sec. Parallel: 1.1A
• Sec. Series: 0.5A
• Primary voltage: 2 x 120V AC
• Total VA rating: 10VA
• Insulation: Class A (105C)
• Magnetising current: <20mA
• Temperature rise: <65C
• Recommended AC Fuse: 100mA
• Regulation: 20%
• Weight: 210g
• PCB hole size: 2mm
• AS/NZS 61558.2.6 approval: Q99396
• Note: Must be used with a standard 100mA external AC fuse

*Specifications are subject to change without notice.

Toroidal transformers provide a higher output compared to traditional E-I transformers of a similar physical size. They have substantially reduced radiated hum and electrical noise, generate less heat and have much better regulation making them ideal for high performance, low noise circuits.

The transformer is potted in an epoxy compound within a plastic housing. Configured with 2 x 120V primaries and 2 identical secondaries which can be wired in either series or parallel. Being PCB mount reduces assembly time as the transformer simply solders to the PCB. For extra stability and mechanical reliability the transformer can be secured to the PCB with a self tapping screw.




PCB Layout



Dimensions

• Sec. V: 7.5+7.5
• Sec. Parallel: 1.3A
• Sec. Series: 0.66A
• Primary voltage: 2 x 120V AC
• Total VA rating: 10VA
• Insulation: Class A (105C)
• Magnetising current: <20mA
• Temperature rise: <65C
• Recommended AC Fuse: 100mA
• Regulation: 20%
• Weight: 210g
• PCB hole size: 2mm
• AS/NZS 61558.2.6 approval: Q99396
• Note: Must be used with a standard 100mA external AC fuse

*Specifications are subject to change without notice.

Toroidal transformers provide a higher output compared to traditional E-I transformers of a similar physical size. They have substantially reduced radiated hum and electrical noise, generate less heat and have much better regulation making them ideal for high performance, low noise circuits.

The transformer is “potted” in an epoxy compound within a plastic housing. Configured with 2 x 120V primaries and 2 identical secondaries which can be wired in either series or parallel. Being PCB mount reduces assembly time as the transformer simply solders to the PCB. For extra stability and mechanical reliability the transformer can be secured to the PCB with a self tapping screw.

 

Specifications:

Sec. V: 6+6 Sec. Parallel: 1.67A Sec. Series: 0.83A Primary voltage: 2 x 120V AC Total VA rating: 10VA Insulation: Class A (105°C) Magnetising current: <20mA Temperature rise: <65°C Recommended AC Fuse: 100mA Regulation: ˜20% Weight: ˜210g PCB hole size: 1.2mm AS/NZS 61558.2.6 approval: Q99396 Note: Must be used with a standard 100mA external AC fuse

Certificate No.: CS 815/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 16.6A Sec. Series: 8.3A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring:

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions

B : 126 d: 27 H : 63 Tolerance: ± 2% * Outside diameter D is given as a maximum value, inner diameter d is given as a minimum value. *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability

Note: Must be used with a 7.5A external AC fuse.

Certificate No.: CS 815/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 20A Sec. Series: 10A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring:

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions

B : 126 d: 27 H : 63 Tolerance: ± 2% * Outside diameter D is given as a maximum value, inner diameter d is given as a minimum value. *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability

Note: Must be used with a 7.5A external AC fuse.

Toroidal transformers are becoming increasingly popular due to their improved magnetic properties and also that they can be made to a lower profile than a standard solenoid core transformer, allowing for equipment of similar power to be of a lower profile such as rack mounted devices.

The advantage of the toroidal (donut) shape is that due to its symmetry the amount of magnetic flux that escapes outside the core (leakage flux) is minimised, therefore it radiates less electromagnetic interference (EMI) to nearby circuits or equipment. EMI is of increasing importance in modern low power, high frequency electronics.
Note: Must be used with a 5A external AC fuse.

Included Mounting Hardware
1 x Mounting Plate
1 x Gasket
1 x Mounting Bolt
1 x Nut


Wiring

Secondary (SEC) Current A
Current available where secondaries are connected in parallel.

Secondary (SEC) Current B
Current available where secondaries are connected in series.




Mounting

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions).
• Lower electrically induced noise demanded by compact equipment.
• High efficiency enabling conservative rating whilst maintaining size advantages.
• The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field.
• Energy authority certified

• Primary voltage: 240V AC
• Secondary voltage: 45V (parallel), 90V (series)
• Secondary current: 6.6A (parallel), 3.3A (series)
• Regulation: Better than 10%
• Maximum temperature rise: 75C
• Dielectric strength: 4000V for 1 Minute
• Insulation class: Class B (130C)
• Tolerance: 2%

*Specifications are subject to change without notice.

Certificate No.: CS 815/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 8.5A Sec. Series: 4.2A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring:

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions:

B : 106 d: 26 H : 57 Tolerance: ± 2% * Outside diameter D is given as a maximum value, inner diameter d is given *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability

Note: Must be used with a 5A external AC fuse.

Certificate No.: CS 815/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 10A Sec. Series: 5A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring:

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions:

B : 106 d: 26 H : 57 Tolerance: ± 2% * Outside diameter D is given as a maximum value, inner diameter d is given *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability

Note: Must be used with a 5A external AC fuse.

Certificate No.: CS 815/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 12A Sec. Series: 6A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring:

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions:

B : 106 d: 26 H : 57 Tolerance: ± 2% * Outside diameter D is given as a maximum value, inner diameter d is given *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability

Note: Must be used with a 5A external AC fuse.

Certificate No.: CS 815/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 16.6A Sec. Series: 8.3A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring:

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions:

B : 106 d: 26 H : 57 Tolerance: ± 2% * Outside diameter D is given as a maximum value, inner diameter d is given *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability

Note: Must be used with a 5A external AC fuse.

Certificate No.: CS 815/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 20A Sec. Series: 10A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring:

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions:

B : 106 d: 26 H : 57 Tolerance: ± 2% * Outside diameter D is given as a maximum value, inner diameter d is given *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability

Note: Must be used with a 5A external AC fuse.

Certificate No.: CS 815/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 25A Sec. Series: 12.5A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field.

Wiring:

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions:

B : 106 d: 26 H : 57 Tolerance: ± 2% * Outside diameter D is given as a maximum value, inner diameter d is given *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability

Note: Must be used with a 5A external AC fuse.

Certificate No.: CS 815/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 33.3A Sec. Series: 16.6A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring:

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions:

D : 106 d: 26 H : 57 Tolerance: ± 2% * Outside diameter D is given as a maximum value, inner diameter d is given *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability

Note: Must be used with a 5A external AC fuse.

These 30VA transformers will fit inside our 1 Unit 19" rack cases.
AS/NZS 61558.2.6 Approval: Q050427
Certificate No.: CS 859/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 1.2A Sec. Series: 0.6A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring:

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions:

D: 76 d: 21 H: 30 Tolerance: ± 2% *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability * Outside diameter D is given as a maximum value, inner diameter d is given

Note: Must be used with a 500mA external AC fuse.

These 30VA transformers will fit inside our 1 Unit 19" rack cases.
AS/NZS 61558.2.6 Approval: Q050427
Certificate No.: CS 859/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 1.6A Sec. Series: 0.8A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring:

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions:

D: 76 d: 21 H: 30 Tolerance: ± 2% *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability * Outside diameter D is given as a maximum value, inner diameter d is given

Note: Must be used with a 500mA external AC fuse.

These 30VA transformers will fit inside our 1 Unit 19" rack cases.
AS/NZS 61558.2.6 Approval: Q050427
Certificate No.: CS 859/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 2A Sec. Series: 1A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring:

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions:

D: 76 d: 21 H: 30 Tolerance: ± 2% *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability * Outside diameter D is given as a maximum value, inner diameter d is given

Note: Must be used with a 500mA external AC fuse.

These 30VA transformers will fit inside our 1 Unit 19" rack cases.
AS/NZS 61558.2.6 Approval: Q050427
Certificate No.: CS 859/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 2.5A Sec. Series: 1.2A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring:

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions:

D: 76 d: 21 H: 30 Tolerance: ± 2% *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability * Outside diameter D is given as a maximum value, inner diameter d is given

Note: Must be used with a 500mA external AC fuse.

These low profile 30VA transformers will fit inside our 1 Unit 19" rack cases.

Toroidal transformers are becoming increasingly popular due to their improved magnetic properties. They can also be made to a lower profile than a standard solenoid core transformer. This allows the equipment to conform to a lower rack unit height i.e. 1RU, 2RU, 3RU.

The advantage of the toroidal (donut) shape is that, due to its symmetry, the amount of magnetic flux that escapes outside the core (leakage flux) is minimised. Therefore, the electromagnetic interference (EMI) that is radiated to nearby circuits or equipment is less. EMI is of increasing importance in modern low power, high frequency electronics.

Toroidal transformer are highly efficient and are replacing the laminated type as the accepted industry standard, because toroids offer advantages in size, weight, and lower radiated field. Included Mounting Hardware: 30VA Series - 1RU Height
Rubber Washer: 6.5 x 70 x 1.5mm - 1PCS
Screw: M6X35mm - 1PCS
Hex Nut: M6 - 1PCS
Washer: M6 - 1PCS
Lock Washer: M6 - 1PCS
Wiring

Secondaries parallel
Current available where secondaries are connected in parallel.

Secondaries series
Current available where secondaries are connected in series.



Mounting

Features

• Low profile design is suitable for use inside our 1RU 19 rack enclosures.
• 30VA series models have potted epoxy centre core for easy mounting.
• Lower electrically induced noise demanded by compact equipment.

• Length: 210mm
• Terminal: 10mm
• Primary Lead No: 1-2
• Colour: Brown, Blue
• Rating: UL1672 AWG#18,105C, VW-1, 300V, Double insulation
• Secondary Lead No: 3-4
• Colour: Red, Black
• Secondary Lead No: 5-6
• Colour: WHI-ORG
• Rating: UL1015 AWG#20, 105C, VW-1, 600V, Single insulation
• Unloaded Voltage: 0-10.08V (V5% regulation)
• Loading Voltage: 0-9.0V
• Rated Current (A): 1.6A
• Tolerance: 2%

*Specifications are subject to change without notice.

Certificate No.: CS 815/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 3.5A Sec. Series: 1.7A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions

B : 100 d: 26 H : 43 Tolerance: ± 2% * Outside diameter D is given as a maximum value, inner diameter d is given as a minimum value *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability

Note: Must be used with a 3A external AC fuse.

Certificate No.: CS 815/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 5.3A Sec. Series: 2.6A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions

B : 100 d: 26 H : 43 Tolerance: ± 2% * Outside diameter D is given as a maximum value, inner diameter d is given as a minimum value *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability

Note: Must be used with a 3A external AC fuse.

Certificate No.: CS 815/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 6.4A Sec. Series: 3.2A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions

B : 100 d: 26 H : 43 Tolerance: ± 2% * Outside diameter D is given as a maximum value, inner diameter d is given as a minimum value *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability

Note: Must be used with a 3A external AC fuse.

Toroidal transformers are becoming increasingly popular due to their improved magnetic properties and also that they can be made to a lower profile than a standard solenoid core transformer, allowing for equipment of similar power to be of a lower profile such as rack mounted devices.

The advantage of the toroidal (donut) shape is that due to its symmetry the amount of magnetic flux that escapes outside the core (leakage flux) is minimised, therefore it radiates less electromagnetic interference (EMI) to nearby circuits or equipment. EMI is of increasing importance in modern low power, high frequency electronics.

Note: Must be used with a 3A external AC fuse.

Included Mounting Hardware
1 x Mounting Plate
1 x Gasket
1 x Mounting Bolt
1 x Nut


Wiring

Secondary (SEC) Current A
Current available where secondaries are connected in parallel.

Secondary (SEC) Current B
Current available where secondaries are connected in series.




Mounting

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions).
• Lower electrically induced noise demanded by compact equipment.
• High efficiency enabling conservative rating whilst maintaining size advantages.
• The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field.

• Primary voltage: 240V AC
• Secondary voltage: 18V (parallel), 36V (series)
• Secondary current: 8.8A (parallel), 4.4A (series)
• Regulation: Better than 10%
• Maximum temperature rise: 75C
• Dielectric strength: 4000V for 1 Minute
• Insulation class: Class B (130C)
• Tolerance: 2%

*Specifications are subject to change without notice.

Certificate No.: CS 815/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 10.7A Sec. Series: 5.3A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions

B : 100 d: 26 H : 43 Tolerance: ± 2% * Outside diameter D is given as a maximum value, inner diameter d is given as a minimum value *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability

Note: Must be used with a 3A external AC fuse.

Certificate No.: CS 815/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 13.3A Sec. Series: 6.6A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions

B : 100 d: 26 H : 43 Tolerance: ± 2% * Outside diameter D is given as a maximum value, inner diameter d is given as a minimum value *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability

Note: Must be used with a 3A external AC fuse.

Certificate No.: CS 815/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 17.8A Sec. Series: 8.9A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions

B : 100 d: 26 H : 43 Tolerance: ± 2% * Outside diameter D is given as a maximum value, inner diameter d is given as a minimum value *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability

Note: Must be used with a 3A external AC fuse.

Certificate No.: CS 815/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 3.2A Sec. Series: 1.6A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions

B : 87 d: 26 H : 37 Tolerance: ± 2% * Outside diameter D is given as a maximum value, inner diameter d is give *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability

Note: Must be used with a 1A external AC fuse.

Certificate No.: CS 815/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 4.4A Sec. Series: 2.2A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions

B : 87 d: 26 H : 37 Tolerance: ± 2% * Outside diameter D is given as a maximum value, inner diameter d is give *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability

Note: Must be used with a 1A external AC fuse.

Certificate No.: CS 815/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 5.3A Sec. Series: 2.6A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions

B : 87 d: 26 H : 37 Tolerance: ± 2% * Outside diameter D is given as a maximum value, inner diameter d is give *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability

Note: Must be used with a 1A external AC fuse.

Certificate No.: CS 815/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 6.6A Sec. Series: 3.3A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions

B : 87 d: 26 H : 37 Tolerance: ± 2% * Outside diameter D is given as a maximum value, inner diameter d is give *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability

Note: Must be used with a 1A external AC fuse.

Certificate No.: CS 815/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 8.8A Sec. Series: 4.4A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions

B : 87 d: 26 H : 37 Tolerance: ± 2% * Outside diameter D is given as a maximum value, inner diameter d is give *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability

Note: Must be used with a 1A external AC fuse.

These 50VA transformers will fit inside our 1 Unit 19" rack cases
Certificate No.: CS 815/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 2A Sec. Series: 1A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions

B : 82 d: 25 H : 31 Tolerance: ± 2% * Outside diameter D is given as a maximum value, inner diameter d is given as minimum value. *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability

Note: Must be used with a 1A external AC fuse.

These 50VA transformers will fit inside our 1 Unit 19" rack cases
Certificate No.: CS 815/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 2.7A Sec. Series: 1.3A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions

B : 82 d: 25 H : 31 Tolerance: ± 2% * Outside diameter D is given as a maximum value, inner diameter d is given as minimum value. *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability

Note: Must be used with a 1A external AC fuse.

These 50VA transformers will fit inside our 1 Unit 19" rack cases
Certificate No.: CS 815/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 3.3A Sec. Series: 1.6A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions

B : 82 d: 25 H : 31 Tolerance: ± 2% * Outside diameter D is given as a maximum value, inner diameter d is given as minimum value. *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability

Note: Must be used with a 1A external AC fuse.

These 50VA transformers will fit inside our 1 Unit 19" rack cases
Certificate No.: CS 815/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 4.1A Sec. Series: 2.0A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions

B : 82 d: 25 H : 31 Tolerance: ± 2% * Outside diameter D is given as a maximum value, inner diameter d is given as minimum value. *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability

Note: Must be used with a 1A external AC fuse.

These 50VA transformers will fit inside our 1 Unit 19" rack cases
Certificate No.: CS 815/Q

 

Specifications

Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 5.5A Sec. Series: 2.7A

Features

• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified

Wiring

Secondary (SEC) Current A Current available where secondaries are connected in parallel. Secondary (SEC) Current B Current available where secondaries are connected in series.

Dimensions

B : 82 d: 25 H : 31 Tolerance: ± 2% * Outside diameter D is given as a maximum value, inner diameter d is given as minimum value. *Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability

Note: Must be used with a 1A external AC fuse.

These compact modules allow powering of fluorescent lights from DC power sources. They accept a 9-15V DC input via screw terminals and are suitable for connection to a fluorescent batten fitting rated up to 58W.

Features:

• High efficiency design runs at cooler temperatures for long life • Reverse polarity & removal of fluoro tube protection • Aluminium mounting bracket

Specifications:

Operating voltage: 9-15VDC No load current: 0.43A Full load current: 1.6A Current at switch on: 2.0A Dimensions (mm): 150 x 40 x 30

This compact module allows powering of fluorescent lights from DC power sources. It accepts a 9-15V DC input via screw terminals and is suitable for connection to a fluorescent batten fitting rated up to 20W.

Features:

• High efficiency design runs at cooler temperatures for long life • Reverse polarity & removal of fluoro tube protection • Aluminium mounting bracket

Specifications

Operating voltage: 9-15VDC No load current: 0.39A Full load current: 1.2A Current at switch on: 2.0A Dimensions (mm): 130 x 40 x 30

This compact heavy duty battery isolator can be used in dual battery systems (such as automotive solar setups). One battery can be connected to a load, such as a camping fridge, while the second battery is isolated, allowing you to start your vehicle even if the first battery is flat. Includes current limiting, thermal & reverse polarity protection. Unlike diode isolation units this fully electronic isolator can be used in modern cars, has protection from spikes and produces much less heat. Suitable for charging systems up to 150A. Dimensions: 90 x 135 x 40mm.

Features:

• Easy to integrate into system wiring • Max 150A • Minimal voltage drop • Suitable for cars, boats, caravans and motorhomes • Ensures total isolation of second battery except during charging

Operating as a simple and effective charger controller, this unit is suitable for sealed or wet cell batteries and utilies the latest in solid state MOSFET switching for reliable operation. Rated charge current 6A. Includes low battery shutdown to prevent excessive discharge of connected cells.

Features:

Compact design. Simple to install and use. 6A charging current. Reverse current protection. Epoxy encapsulated. Low voltage disconnect. Suitable for sealed of wet batteries.

This unit operates as a solar charger by day which then switches on a load at night. It features auto-dusk detection circuit for activating the DC load output when night falls. It is suitable for sealed or wet cell batteries and utilises the latest
in solid state MOSFET switching for reliable operation.
Rated charge current 6A. Includes low battery shutdown to prevent excessive discharge of connected cells.

Features:

• Compact design • Simple to install and use • 6A charging current • Reverse current protection • Epoxy encapsulated • Low voltage disconnect

This versatile solar regulator is suitable for use with all types of photovoltaic panels and wet or sealed lead acid batteries. The internal microprocessor controller provides the optimal charging current and voltage according to the actual stage of charge and type of battery. The 3-stage (Bulk, Absorption & Float) charger ensures proper maintenance of lead acid type batteries, maximising their service life. For wet cells, there is an equalisation function, which automatically cycles the battery once a month for two hours. The unit also automatically disconnects the battery if the terminal voltage drops below 11.5V, and then reconnects it once it is charged again. It features an LCD panel that displays battery voltage, the solar panel voltage and the active charge mode. Unlike other regulators, you can see the true status of the charging system at a glance.

Features

• User adjustable charging voltages • Suitable for most types of heavy duty 12V battery. • Microprocessor control PWM and 3 stage charging algorithms. • Bulk, Absorption & Float Charge status on LCD Display. • Ampere Hour logging read outs in 3 sets, today and last 2 days. • 5 State LED Indications of battery levels. • Electronic Overcharge Protection & Back Current Blocking to PV panel. • Over Temperature Protection of PV Charge Controller's electronic circuit. • Dusk to Dawn automatic ON-Off with 10 selectable on-off programs. • Adjustable battery low voltage level disconnect and reconnect for DC output. • Optional Temperature Sensor for compensated battery charging. • Optional Remote Signal Terminal.

Specifications:

Battery voltage: 12V Maximum PV panel open circuit voltage: 26V Continuous load / charge current: 30A Maximum charge current (5 mins.): 35A Maximum load current (5 mins.): 35A Operation current (no load and PV): 15mA Voltage across terminal (PV to battery): 1.2V Voltage across terminal (battery to load): 0.6V Electronic Blocking*: Yes Battery reverse polarity protection: Yes Overcharge & Over-discharge protection: Yes Battery status LED indiction: 5-state LED Indications Charging status indiction: 3-state LCD Display Recommended wire size: #10AWG Weight: 0.48kg Dimension: 150(W) x 85(D) x 50(H) mm Fuse: 40A Operating ambient temperature: -10 to 50°C Over temperature protection: Yes Battery charging float voltage setting: Adjustable from 12.0-15.0V Battery charging bulk voltage setting: Adjustable from 12.0-16.0V DC load control mode ( For DC load terminal) Low Voltage Disconnect(LVD): 8-16V Low Voltage Reconnect(LVR): 8-16V * To protect against reverse polarity connection of PV panel and to block current from battery to PV panel when voltage of battery is higher than PV panel

This versatile solar regulator is suitable for use with all types of photovoltaic panels and wet or sealed lead acid batteries. The internal microprocessor controller provides the optimal charging current and voltage according to the actual stage of charge and type of battery. The 3-stage (Bulk, Absorption & Float) charger ensures proper maintenance of lead acid type batteries, maximising their service life. For wet cells, there is an equalisation function, which automatically cycles the battery once a month for two hours. The unit also automatically disconnects the battery if the terminal voltage drops below an adjustable level (as low as 16V), and then reconnects it once it is charged again. It features an LCD panel that displays battery voltage, the solar panel voltage and the active charge mode. Unlike other regulators, you can see the true status of the charging system at a glance.

Features

• User adjustable charging voltages • Microprocessor control PWM and 3 stage charging algorithms. • Bulk, Absorption & Float Charge status on LCD Display. • Ampere Hour logging read outs in 3 sets, today and last 2 days. • 5 State LED Indications of battery levels. • Electronic Overcharge Protection & Back Current Blocking to PV panel. • Over Temperature Protection of PV Charge Controller's electronic circuit. • Dusk to Dawn automatic ON-Off with 10 selectable on-off programs. • Adjustable battery low voltage level disconnect and reconnect for DC output. • Optional Temperature Sensor for compensated battery charging. • Optional Remote Signal Terminal.

Specifications:

Battery voltage: 24V Continuous load / charge current: 20A Maximum charge current (5 mins.): 25A Maximum load current (5 mins.): 25A Voltage across terminal (PV to battery): 0.8V Voltage across terminal (battery to load): 0.5V Recommended wire size: #12AWG Weight: 0.47kg Dimension: 150(W) x 85(D) x 45(H) mm Fuse: 30A DC load control mode ( For DC load terminal) Low Voltage Disconnect(LVD): 16-32V Low Voltage Reconnect(LVR): 16-32V

This versatile solar regulator is suitable for use with all types of photovoltaic panels and wet or sealed lead acid batteries. The internal microprocessor controller provides the optimal charging current and voltage according to the actual stage of charge and type of battery. The 3-stage (Bulk, Absorption & Float) charger ensures proper maintenance of lead acid type batteries, maximising their service life. For wet cells, there is an equalisation function, which automatically cycles the battery once a month for two hours. The unit also automatically disconnects the battery if the terminal voltage drops below 11.5V, and then reconnects it once it is charged again. It features an LCD panel that displays battery voltage, the solar panel voltage and the active charge mode. Unlike other regulators, you can see the true status of the charging system at a glance.

Features

• User adjustable charging voltages • Suitable for most types of heavy duty 12V battery. • Microprocessor control PWM and 3 stage charging algorithms. • Bulk, Absorption & Float Charge status on LCD Display. • Ampere Hour logging read outs in 3 sets, today and last 2 days. • 5 State LED Indications of battery levels. • Electronic Overcharge Protection & Back Current Blocking to PV panel. • Over Temperature Protection of PV Charge Controller's electronic circuit. • Dusk to Dawn automatic ON-Off with 10 selectable on-off programs. • Adjustable battery low voltage level disconnect and reconnect for DC output. • Optional Temperature Sensor for compensated battery charging. • Optional Remote Signal Terminal.

Specifications:

Battery voltage: 12V Maximum PV panel open circuit voltage: 26V Continuous load / charge current: 20A Maximum charge current (5 mins.): 25A Maximum load current (5 mins.): 25A Operation current (no load and PV): 30mA Voltage across terminal (PV to battery): 0.8V Voltage across terminal (battery to load): 0.4V Electronic Blocking*: Yes Battery reverse polarity protection: Yes Overcharge & Over-discharge protection: Yes Battery status LED indiction: 5-state LED Indications Charging status indiction: 3-state LCD Display Recommended wire size: #12AWG Weight: 0.47kg Dimension: 150(W) x 85(D) x 45(H) mm Fuse: 30A Operating ambient temperature: -10 to 50°C Over temperature protection: Yes Battery charging float voltage setting: Adjustable from 12.0-15.0V Battery charging bulk voltage setting: Adjustable from 12.0-16.0V DC load control mode ( For DC load terminal) Low Voltage Disconnect(LVD): 8-16V Low Voltage Reconnect(LVR): 8-16V * To protect against reverse polarity connection of PV panel and to block current from battery to PV panel when voltage of battery is higher than PV panel

Sturdy all-weather construction with anodised aluminium frame and tempered glass panel. In ideal conditions, the unit produces up to 400mA charge current which would be sufficient to charge and maintain a 12V lead-acid battery. Suitable for use in small, self-contained 12V remote power systems such as water pumping stations, electric fences, remote lighting, boating or marine applications etc. It includes a back-feed diode to prevent the battery from discharging back though the charger. Fitted with 2m lead and alligator clips.

Dimensions 465W x 320H x 25D mm.

Trickle charges your car or boat battery, keeping it in charged condition even when it is not used for months at a time!

Lead acid cells will self-discharge, even when completely disconnected, if they are not re-charged regularly eg when a car is not driven for long periods or on a boat which is used infrequently. This may permanently damage the battery’s capacity, requiring it to be replaced prematurely. This solar charger is a great “no-fuss” solution for battery maintenance, and will keep car batteries trickle charged via the cigarette lighter socket. It includes a back-feed diode to prevent the battery from discharging back though the charger. Includes suction cups for mounting to inside car windows, alligator clips and cigarette lighter adaptor lead.

Note: Suitable for maintaining charged batteries, not designed for charging flat batteries.

Dimensions:

355W x 125H x 13D mm.

Polycrystalline solar panels are designed for long life (up to 20 years) and high efficiency output. These units may be ganged into arrays for applications where high power output is required eg for large battery banks. An excellent solution for remote or mobile power applications, electric fence battery banks, inverter systems, RV’s, caravans, boats etc. All aluminium frames and tempered glass panels allow installation in the most demanding environments. To prevent moisture ingress, the solar cell modules are laminated between sheets of high transmissivity 3mm tempered glass, tedlarpolyester-tedlar (TPT) material and sheets of ethylene vinyl acetate (EVA).

Includes a waterproof junction box and blocking diode.

Specifications:

Max. power: 110W Max. voltage: 17.2V Max. current: 6.2A Dimensions: 1315 x 661 x 50mm Net weight: 11.5kg

Monocrystalline solar panels are designed for long life (up to 20 years) and high efficiency output. These units may be ganged into arrays for applications where high power output is required eg for large battery banks. An excellent solution for remote or mobile power applications, electric fence battery banks, inverter systems, RV’s, caravans, boats etc. All aluminium frames and tempered glass panels allow installation in the most demanding environments. To prevent moisture ingress, the solar cell modules are laminated between sheets of high transmissivity 3mm tempered glass, tedlarpolyester-tedlar (TPT) material and sheets of ethylene vinyl acetate (EVA).

Includes a waterproof junction box and blocking diode.


Manufacturer offers 2 year warranty on workmanship and a 20 year warranty on panel output

Specifications:

Max. power: 80W Max. voltage: 17.2V Max. current: 4.65A Dimensions: 1196 x 534 x 35mm Net weight: 7.9kg

Monocrystalline solar panels are designed for long life (up to 20 years) and high efficiency output. These units may be ganged into arrays for applications where high power output is required eg for large battery banks. An excellent solution for remote or mobile power applications, electric fence battery banks, inverter systems, RV’s, caravans, boats etc. All aluminium frames and tempered glass panels allow installation in the most demanding environments. To prevent moisture ingress, the solar cell modules are laminated between sheets of high transmissivity 3mm tempered glass, tedlarpolyester-tedlar (TPT) material and sheets of ethylene vinyl acetate (EVA).

Includes a waterproof junction box and blocking diode.

Manufacturer offers 2 year warranty on workmanship and a 20 year warranty on panel output

Specifications:

Max. power: 60W Max. voltage: 17.2V Max. current: 3.49A Dimensions: 771 x 665 x 30mm Net weight: 6.2kg

Monocrystalline solar panels are designed for long life (up to 20 years) and high efficiency output. These units may be ganged into arrays for applications where high power output is required eg for large battery banks. An excellent solution for remote or mobile power applications, electric fence battery banks, inverter systems, RV’s, caravans, boats etc. All aluminium frames and tempered glass panels allow installation in the most demanding environments. To prevent moisture ingress, the solar cell modules are laminated between sheets of high transmissivity 3mm tempered glass, tedlarpolyester-tedlar (TPT) material and sheets of ethylene vinyl acetate (EVA).

Includes a waterproof junction box and blocking diode.


Manufacturer offers 2 year warranty on workmanship and a 20 year warranty on panel output

Specifications:

Max. power: 20W Max. voltage: 16.8V Max. current: 1.19A Dimensions: 638 x 278 x 25mm Net weight: 2.2kg

Monocrystalline solar panels are designed for long life (up to 20 years) and high efficiency output. These units may be ganged into arrays for applications where high power output is required eg for large battery banks. An excellent solution for remote or mobile power applications, electric fence battery banks, inverter systems, RV’s, caravans, boats etc. All aluminium frames and tempered glass panels allow installation in the most demanding environments. To prevent moisture ingress, the solar cell modules are laminated between sheets of high transmissivity 3mm tempered glass, tedlarpolyester-tedlar (TPT) material and sheets of ethylene vinyl acetate (EVA).

Includes a waterproof junction box and blocking diode.

Manufacturer offers 2 year warranty on workmanship and a 20 year warranty on panel output

Specifications

Max. power: 10W Max. voltage: 17.2V Max. current: 0.58A Dimensions: 310 x 368 x 18mm Net weight: 1.5kg

Monocrystalline solar panels are designed for long life (up to 20 years) and high efficiency output. These units may be ganged into arrays for applications where high power output is required eg for large battery banks. An excellent solution for remote or mobile power applications, electric fence battery banks, inverter systems, RV’s, caravans, boats etc. All aluminium frames and tempered glass panels allow installation in the most demanding environments. To prevent moisture ingress, the solar cell modules are laminated between sheets of high transmissivity 3mm tempered glass, tedlarpolyester-tedlar (TPT) material and sheets of ethylene vinyl acetate (EVA).

Includes a waterproof junction box and blocking diode.


Manufacturer offers 2 year warranty on workmanship and a 20 year warranty on panel output

Specifications:

Max. power: 5W Max. voltage: 16.8V Max. current: 0.3A Dimensions: 306 x 218 x 25mm Net weight: 1.2kg

6.35mm Pro Stereo Plug

6.35mm Pro Stereo Socket

AMPHENOL (formerly Alcatel) connectors are ideal for use in high performance audio applications, including mobile PA use. They represent a no-compromise approach to connector technology, with rugged construction, secure mechanical characteristics and low induced noise levels.

6.35mm Stereo Line Plug

4-6mm cable entry

AMPHENOL (formerly Alcatel) connectors are ideal for use in high performance audio applications, including mobile PA use. They represent a no-compromise approach to connector technology, with rugged construction, secure mechanical characteristics and low induced noise levels.

6.35mm Mono Line Plug

4-6mm cable entry

6.35mm Pro Mono Plug

High quality Amphenol right angle jack plug. Designed for use in high end audio installations where space is limited.

High quality Amphenol right angle jack plug. Designed for use in high end audio installations where space is limited.

Plug jack, 6.35mm Stereo. Gold

6.35mm Metal Stereo

6.35mm Mono Jack. Gold.

6.35mm Metal Mono

6.35mm Plug 90° Mono. Metal Housing

6.35mm Plug 90° Stereo. Metal Housing

6.35mm Plug 90° Stereo. Plastic Housing

6.35mm Stereo

6.35mm Plug 90° Mono. Plastic Housing

High quality Neutrik line jack plug. 4mm cable entry

Plug, 3.5mm jack. Audio/Video. Gold

6.35mm Mono

3.5mm stereo jack plug. Gold.

3.5mm Stereo Black

3.5mm Mono Black

3.5mm Mono Red

3.5mm Stereo Metal

PCB Mount Mains Transformers
These compact Powertran mains transformers are ideal for confined space applications. The dual secondaries may be used in series or parallel.

PCB Mount Mains Transformers
These compact Powertran mains transformers are ideal for confined space applications. The dual secondaries may be used in series or parallel.

Physical dimensions compatible with Arlec/Stadium series Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer.

Specifications:

Primary Voltage: 240V AC Total VA Rating: 7VA Insulation: Class A (105°C) Magnetising Current: <30mA Temperature Rise: <65°C Regulation: 11% Weight: 265g PCB Hole Size: 1.2mm Secondary Voltage: 15 + 15 Parallel : 0.466A Series: 0.233A

Note: Must be used with a standard 100mA external fuse.

Physical dimensions compatible with Arlec/Stadium series Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer.

Specifications:

Primary Voltage: 240V AC Total VA Rating: 7VA Insulation: Class A (105°C) Magnetising Current: <30mA Temperature Rise: <65°C Regulation: 11% Weight: 265g PCB Hole Size: 1.2mm Secondary Voltage: 12 + 12 Parallel : 0.58A Series: 0.29A

Note: Must be used with a standard 100mA external fuse.

Physical dimensions compatible with Arlec/Stadium series Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer.

Specifications:

Primary Voltage: 240V AC Total VA Rating: 7VA Insulation: Class A (105°C) Magnetising Current: <30mA Temperature Rise: <65°C Regulation: 11% Weight: 265g PCB Hole Size: 1.2mm Secondary Voltage: 9 + 9 Parallel : 0.77A Series: 0.388A

Note: Must be used with a standard 100mA external fuse.

Physical dimensions compatible with Arlec/Stadium series Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer.

Specifications:

Primary Voltage: 240V AC Total VA Rating: 7VA Insulation: Class A (105°C) Magnetising Current: <30mA Temperature Rise: <65°C Regulation: 11% Weight: 265g PCB Hole Size: 1.2mm Secondary Voltage: 7.5 + 7.5 Parallel : 0.933A Series: 0.466A

Note: Must be used with a standard 100mA external fuse.

Physical dimensions compatible with Arlec/Stadium series Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer.

Specifications:

Primary Voltage: 240V AC Total VA Rating: 7VA Insulation: Class A (105°C) Magnetising Current: <30mA Temperature Rise: <65°C Regulation: 11% Weight: 265g PCB Hole Size: 1.2mm Secondary Voltage: 6 + 6 Parallel : 1.166A Series: 0.583A

Note: Must be used with a standard 100mA external fuse.

Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer.

Specifications:

Primary Voltage: 240V AC Total VA Rating: 10VA Insulation: Class A (105°C) Magnetising Current: <30mA Temperature Rise: <65°C Regulation: 11% Weight: 250g PCB Hole Size: 1.2mm Secondary Voltage: 15 + 15 Parallel : 0.66A Series: 0.33A

Note: Must be used with a standard 100mA external fuse.

Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer.

Specifications:

Primary Voltage: 240V AC Total VA Rating: 10VA Insulation: Class A (105°C) Magnetising Current: <30mA Temperature Rise: <65°C Regulation: 11% Weight: 250g PCB Hole Size: 1.2mm Secondary Voltage: 12 + 12 Parallel : 0.83A Series: 0.41A

Note: Must be used with a standard 100mA external fuse.

Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer.

Specifications:

Primary Voltage: 240V AC Total VA Rating: 10VA Insulation: Class A (105°C) Magnetising Current: <30mA Temperature Rise: <65°C Regulation: 11% Weight: 250g PCB Hole Size: 1.2mm Secondary Voltage: 9 + 9 Parallel : 1.1A Series: 0.55A

Note: Must be used with a standard 100mA external fuse.

Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer.

Specifications:

Primary Voltage: 240V AC Total VA Rating: 10VA Insulation: Class A (105°C) Magnetising Current: <30mA Temperature Rise: <65°C Regulation: 11% Weight: 250g PCB Hole Size: 1.2mm Secondary Voltage: 7.5 + 7.5 Parallel : 1.33A Series: 0.66A

Note: Must be used with a standard 100mA external fuse.

Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer.

Specifications:

Primary Voltage: 240V AC Total VA Rating: 10VA Insulation: Class A (105°C) Magnetising Current: <30mA Temperature Rise: <65°C Regulation: 11% Weight: 250g PCB Hole Size: 1.2mm Secondary Voltage: 6 + 6 Parallel : 1.66A Series: 0.83A

Note: Must be used with a standard 100mA external fuse.

Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer.

Specifications:

Sec. V: 15+15 Sec. Parallel: 0.466A Sec. Series: 0.233A Primary voltage: 240V AC Total VA rating: 7VA Insulation: Class B (130°C) Magnetising current: <30mA Temperature rise: <65°C Recommended AC Fuse: 100mA Regulation: 11% Weight: 265g PCB hole size: 1mm Thermal Fuse: Internal 115°C AS/NZS 61558.2.6 approval: Q04081 Note: Must be used with a standard 100mA external AC fuse.

Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer.

Specifications:

Sec. V: 12+12 Sec. Parallel: 0.58A Sec. Series: 0.29A Primary voltage: 240V AC Total VA rating: 7VA Insulation: Class B (130°C) Magnetising current: <30mA Temperature rise: <65°C Recommended AC Fuse: 100mA Regulation: 11% Weight: 265g PCB hole size: 1mm Thermal Fuse: Internal 115°C AS/NZS 61558.2.6 approval: Q04081 Note: Must be used with a standard 100mA external AC fuse.

Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer.

Specifications:

Sec. V: 9+9 Sec. Parallel: 0.77A Sec. Series: 0.388A Primary voltage: 240V AC Total VA rating: 7VA Insulation: Class B (130°C) Magnetising current: <30mA Temperature rise: <65°C Recommended AC Fuse: 100mA Regulation: ˜11% Weight: ˜265g PCB hole size: 1mm Thermal Fuse: Internal 115°C AS/NZS 61558.2.6 approval: Q04081 Note: Must be used with a standard 100mA external AC fuse.

Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer.

Specifications:

Sec. V: 7.5+7.5 Sec. Parallel: 0.933A Sec. Series: 0.466A Primary voltage: 240V AC Total VA rating: 7VA Insulation: Class B (130°C) Magnetising current: <30mA Temperature rise: <65°C Recommended AC Fuse: 100mA Regulation: ˜11% Weight: ˜265g PCB hole size: 1mm Thermal Fuse: Internal 115°C AS/NZS 61558.2.6 approval: Q04081 Note: Must be used with a standard 100mA external AC fuse.

Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer.

Specifications:

Sec. V: 6+6 Sec. Parallel: 1.166A Sec. Series: 0.583A Primary voltage: 240V AC Total VA rating: 7VA Insulation: Class B (130°C) Magnetising current: <30mA Temperature rise: <65°C Recommended AC Fuse: 100mA Regulation: 11% Weight: 265g PCB hole size: 1mm Thermal Fuse: Internal 115°C AS/NZS 61558.2.6 approval: Q04081 Note: Must be used with a standard 100mA external AC fuse.

Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer.

Specifications:

Sec. V: 15+15 Sec. Parallel: 0.333A Sec. Series: 0.166A Primary voltage: 240V AC Total VA rating: 5VA Insulation: Class B (130°C) Magnetising current: <30mA Temperature rise: <65°C Regulation: 20% Weight: 175g PCB hole size: 1mm Thermal Fuse: Internal 115°C AS/NZS 61558.2.6 approval: Q04081

Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer.

Specifications:

Sec. V: 12+12 Sec. Parallel: 0.416A Sec. Series: 0.208A Primary voltage: 240V AC Total VA rating: 5VA Insulation: Class B (130°C) Magnetising current: <30mA Temperature rise: <65°C Regulation: 20% Weight: 175g PCB hole size: 1mm Thermal Fuse: Internal 115°C AS/NZS 61558.2.6 approval: Q04081

Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer.

Specifications:

Sec. V: 9+9 Sec. Parallel: 0.55A Sec. Series: 0.277A Primary voltage: 240V AC Total VA rating: 5VA Insulation: Class B (130°C) Magnetising current: <30mA Temperature rise: <65°C Regulation: 20% Weight: 175g PCB hole size: 1mm Thermal Fuse: Internal 115°C AS/NZS 61558.2.6 approval: Q04081

Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer.

Specifications:

Sec. V: 7.5+7.5 Sec. Parallel: 0.66A Sec. Series: 0.33A Primary voltage: 240V AC Total VA rating: 5VA Insulation: Class B (130°C) Magnetising current: <30mA Temperature rise: <65°C Regulation: 20% Weight: 175g PCB hole size: 1mm Thermal Fuse: Internal 115°C AS/NZS 61558.2.6 approval: Q04081

Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer.

Specifications:

Sec. V: 6+6 Sec. Parallel: 0.83A Sec. Series: 0.416A Primary voltage: 240V AC Total VA rating: 5VA Insulation: Class B (130°C) Magnetising current: <30mA Temperature rise: <65°C Regulation: ˜20% Weight: ˜175g PCB hole size: 1mm Thermal Fuse: Internal 115°C AS/NZS 61558.2.6 approval: Q04081

Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer.

Specifications:

Sec. V: 15+15 Sec. Parallel: 0.2A Sec. Series: 0.1A Primary voltage: 240V AC Total VA rating: 3VA Insulation: Class B (130°C) Magnetising current: <20mA Temperature rise: <65°C Regulation: ˜23% Weight: ˜95g PCB hole size: 1mm Thermal Fuse: Internal 115°C AS/NZS 61558.2.6 approval: Q04081

Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer.

Specifications:

Sec. V: 12+12 Sec. Parallel: 0.25A Sec. Series: 0.125A Primary voltage: 240V AC Total VA rating: 3VA Insulation: Class B (130°C) Magnetising current: <20mA Temperature rise: <65°C Regulation: 23% Weight: 95g PCB hole size: 1mm Thermal Fuse: Internal 115°C AS/NZS 61558.2.6 approval: Q04081

Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer.

Specifications:

Sec. V: 9+9 Sec. Parallel: 0.33A Sec. Series: 0.166A Primary voltage: 240V AC Total VA rating: 3VA Insulation: Class B (130°C) Magnetising current: <20mA Temperature rise: <65°C Regulation: ˜23% Weight: ˜95g PCB hole size: 1mm Thermal Fuse: Internal 115°C AS/NZS 61558.2.6 approval: Q04081

Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer.

Specifications:

Sec. V: 7.5+7.5 Sec. Parallel: 0.4A Sec. Series: 0.2A Primary voltage: 240V AC Total VA rating: 3VA Insulation: Class B (130°C) Magnetising current: <20mA Temperature rise: <65°C Regulation: ˜23% Weight: ˜95g PCB hole size: 1mm Thermal Fuse: Internal 115°C AS/NZS 61558.2.6 approval: Q04081

Manufactured using very high quality grain oriented silicon steel. This results in a compact, high performance, high output transformer. 

Specifications:

Sec. V: 6+6 Sec. Parallel: 0.5A Sec. Series: 0.25A Primary voltage: 240V AC Total VA rating: 3VA Insulation: Class B (130°C) Magnetising current: <20mA Temperature rise: <65°C Regulation: ˜23% Weight: ˜95g PCB hole size: 1mm Thermal Fuse: Internal 115°C AS/NZS 61558.2.6 approval: Q04081

Plastic RCA line connectors with strain relief. Maximum cable entry size 5mm Ø.

Plastic RCA line connectors with strain relief. Maximum cable entry size 5mm Ø.

Plastic RCA line connectors with strain relief. Maximum cable entry size 5mm Ø.

Plastic RCA line connectors with strain relief. Maximum cable entry size 5mm Ø.

Jumper link suits 14mm pitch dual RCA sockets.

90° angled plugs for confined spaces eg: behind hi-fi equipment in a cabinet.
Maximum cable entry size 5mmØ. Black

90° angled plugs for confined spaces eg: behind hi-fi equipment in a cabinet.
Maximum cable entry size 5mmØ. Red

Gold plated RCA Line socket with strain relief spring and solder connections. Maximum cable entry size 7mmØ. Black identifying stripe

Gold plated RCA Line socket with strain relief spring and solder connections. Maximum cable entry size 7mmØ. Red identifying stripe

Super high-quality metal RCA plugs with gold plated contacts for ultra low connection loss. 8mm cable entry size. Green
Supplied in a 3pk. One Yellow, One Red, One White

Super high-quality metal RCA plugs with gold plated contacts for ultra low connection loss. 8mm cable entry size.

Supplied as a 3pk. One Red. One Green. One Blue.

Super high-quality metal RCA plugs with gold plated contacts for ultra low connection loss. 6mm cable entry size.

Supplied in a 2pk. One Red. One White

Super high-quality metal RCA plugs with gold plated contacts for ultra low connection loss. 8mm cable entry size. Yellow

Super high-quality metal RCA plugs with gold plated contacts for ultra low connection loss. 8mm cable entry size. Blue

Super high-quality metal RCA plugs with gold plated contacts for ultra low connection loss. 8mm cable entry size. Green

Super high-quality metal RCA plugs with gold plated contacts for ultra low connection loss. 8mm cable entry size. Red

Super high-quality metal RCA plugs with gold plated contacts for ultra low connection loss. 6mm cable entry size. White