The TF4400PVRt now makes it affordable so that everybody can own the latest in Topfield Digital Technology. If you're not interested in Multimedia functions of the high models or the Award winning styling of the Masterpiece and just want your PVR to do what Topfield PVR's do best then this is the one for you!

Features:

• 80GB HARD DRIVE SAVE AROUND 20HRS OF FULL DIGITAL TV QUALITY PROGRAMS (GENUINE TWIN TUNER)RECORD 2 CHANNELS SIMULTANEOUSLY WHILE PLAYING BACK A PRE RECORDING • PAUSE / REWIND LIVE TV • SKIP ADS • AUTOMATICALLY REMEMBERS TO RECORD YOUR FAVOURITE TV SHOWS EVERY WEEK AFTER YOU SET IT ONCE • PIP (PICTURE IN PICTURE) • AUTOMATICALLY SUBTITLE RECORDING FOR THE HEARING IMPAIRED • DOLBY AC-3 OUTPUT

Spare 6 disc cartridge for Pioneer CD player.

The A 5400 digital audio processor is a comprehensive system which integrates pre-amplifier, compressor limiter, equaliser, as well as matrixing and delay functions into one unit. Useful features like automatic gain control, feedback killers, auto microphone mixers and crossovers are also part of the A 5400’s impressive components library. A unique digital signal processor manages up to 8 microphones (VOX or contact activation) with different priority levels.

Internal processing of audio signals can be fully programmed to suit the clients application. Installers can select the audio processing features they wish to apply to the various inputs and outputs with the provided PC software. Once the configuration process is complete, it can be uploaded to the A 5400. All configurations can be backed up onto PC and loaded into the A 5400 when required.

Each front panel control can be associated to any of the variable audio processing functions of the A 5400, including: input level, output level, source selection, routing, preset changes. For remote configuration changes A 5412 wallplates may be installed in each zone and connected to the A 5400 via its analogue control inputs. Wallplates allow source selection and volume control adjustments.
The A 5400 can also be controlled via an external system such as Crestron®, AMX® or by a PC and supplied software.

The A 5400 has 8 universal balanced audio inputs and 8 balanced audio outputs. It is also fitted with 8 TTL logic inputs and outputs. Each of the hardware inputs or outputs can be associated to virtually any software audio processing feature the system designer requires.

The A 5400 presents the end user with state-of-the-art technology while remaining user-friendly.

All of these functions make the A 5400 well suited to audio signal processing in places of worship, auditoriums, function centres, clubs, halls, pubs and shopping centres etc.

Features

• 8 balanced analogue audio or digital audio input and output. • 48vdc phantom power on analogue audio input. • 32-bit AD (analogue devices) floating point DSP • 24-bit A/D and D/A converters, 48 or 96kHz sampling rates • 5 presets memory recalled by input logical contacts. • 8 assignable input logical contacts for remote control. • 8 assignable output logical contacts for the purpose to remote control 3rd party devices. • RS-232 port for the connection with PC or Laptop to set-up and configuration. • Can be controlled by 3rd party control like Crestron®, AMX® via RS-232 port. • Can be operated on 24V DC via a battery back-up. • Fault indication is given via a N/O and N/C relay contact for remote monitoring or bypass.

Specifications

Number of inputs and outputs: 8/8 Impedance of input: 6.8KO Type & connector of input: Active Balanced, Screw Pluggable Sensitivity on inputs, dB: 0dB/High, switchable by DIP switch Type of output connectors: Active Balanced, Screw Pluggable Max. output level, volt: 1V (0 dBV ) @THD+N = 0.1% Frequency response, Hz: 20 - 20,000 THD + noise: Less than 0.1% SNR @ 0db in-out, dB: 90dB (A-weighted) @0dBv in-out A/D and D/A converters, bits: A/D: 24, D/A: 24 Sampling resolution, kHz: 48/96, Configurable Digital signal processor, bits: 32, Floating Point External control and data bus port: RS-232 System failure indicator: NO/ NC Relay (30Vdc, 7A) Phantom power, Vdc : 48Vdc Selectable by DIP Switch Power supply, Vac: AC:100~240 Vac, 50/60Hz Auto-switching Vdc or 20~25V Vdc Power consumption, watt: AC: 55, DC: 45 Dimensions(WxDxH), mm: 482 x 318 x 44 Net weight, Kgs: 3.29 Color/ finish, mounting: Matt Black Steel, 19" Rack Mount

Spare crossfader slider for A 2546 DJ mixer

DVI video matrix switcher 4 inputs to 1 output

For DVI, the maximum cable run is 5-12m (depending on resolution, quality of cable used etc). This booster allows up to 40m between devices. Ideal for applications where video equipment is stored in a separate room or cabinet. It can also help rectify signal & quality losses often associated with long DVI cable runs. Up to 1600 x 1200 at 60Hz. Includes power supply.

Features

• Boosts DVI signal allowing up to 40m between devices • 1650MHzvideo bandwidth • High resolution capable • Input/output signal indicators

Creator part: DVI-S4
Bandwidth: 1.65GBps
Audio: No
Video: DVI
Control: RS232

Composite video and stereo audio splitter to 16 outputs

This compact transceiver pair permits long distance transmission (up to 300m) of VGA and stereo audio signals over UTP cable. Significantly cheaper when compared to long multicore cable runs and signal boosters. Sharpness and brightness adjustments are provided at the receiving end for local signal fine tuning. Will support VGA - UXGA resolutions. Includes power supply.

Features

• Allows long distance transmission of analogue VGA & stereo audio signals • Maximum distance 300m • Compatible with VGA-UXGA, composite, s-video and component signals • Loop output for local monitor • Sharpness & brightness adjustments

This quality scaling device converts composite or S-Video signals to RGBHV or VGA formats. Ideal for integrating low end video formats into high end systems. For example, displaying a security camera signal on a computer monitor or projector. Dual outputs are provided, 5 x BNC for RGBHV and DE15 VGA connector, which can be viewed simultaneously. Maximum resolution 1280 x 1024. Includes power supply.

Features

• Upscales composite or S-Video signal to RGBHV or VGA format • NTSC, PAL & SECAM compatible • Local monitor output

VGA/RGB Signal amplifier

VGA splitter 1 input to 8 outputs

The A 6704 is designed for use in classrooms, lecture theatres, training rooms, boardrooms etc. It features one VGA input with audio plus a composite AV input. These are switch selectable on the front panel. A 6.35mm microphone input is also provided for addressing students. Two parallel VGA outputs allow local monitoring plus output to projector. Three additional buttons on the front panel may be custom programmed to control external devices via RS-232. Up to 100 infra-red or RS-232 control commands may be programmed. This is ideal for turning a projector or other equipment on and off. An infra-red repeater enables control of devices located remotely or inside secure equipment cabinets. The compact housing flush mounts into a desktop providing easy access to all inputs and volume adjustment. Includes front panel volume adjustment. Dimensions: 120 x 120 x 75mm.

Features

• All in one desktop AV controller for classrooms • Learns remote control codes for programming into special function keys • Local desktop inputs for laptop computer, AV and microphone • RS232 control port • High 350MHz bandwidth for high performance video • Infra red repeater port • Includes 2 x infra redemitters • 240VAC operation.

Composite video and stereo audio matrix switcher 16 inputs to 16 outputs

Composite video and stereo audio matrix switcher 8 inputs to 8 outputs

Composite video and stereo audio matrix switcher 4 inputs to 4 outputs

These mixed converter/switchers have been designed to convert multiple audio and video inputs to high resolution outputs. Front panel controls allow input selection and output resolution adjustment. Mic volume, master volume and muting are also selectable. The system can be remotely controlled via RS232, making it ideal for integration with a PC or Creator touch panel control system. Unit includes infra red remote control which can be used to perform all adjustments and switching functions. Two models are available.

A 6560: Accepts 4 channels of composite video & stereo audio; 4 channels of S-Video and stereo audio; 4 channels of VGA and stereo audio; 3 unbalanced mic channels. Three VGA resolution selections - 800 x 600 @ 76Hz, 1024 x 768 @ 60Hz, 1280 x 1024 @ 60Hz, plus stereo RCA output. Dual VGA outputs are provided which are wired in parallel for use with a local monitor.

RGB matrix switcher 8 inputs to 8 outputs

VGA matrix switcher 8 inputs to 8 outputs

Creator part: VGA0801
Bandwidth: 200MHz
Audio: No
Video: VGA
Control: RS232

A wireless two-way 7” 16-bit LCD touchscreen with 262K colour. The two way communication allows the user to receive video back to the screen with PIP feature. The software included supports pictures, diagrams, characters, 3D/2D keys and animated pictures. The screen may be located up to 80m away from the controller

Specifications

Size: 7” Colour: 262K Colour Resolution: 800x480 Control: RF 433Mhz Video: 2.4GHz wireless Direction: Two-way

An 8 bit 5.7” transmissive LCD touchscreen. One-way communication is via RF wireless link with an operating range of up to 80m The software included supports pictures, diagrams, characters, 2D keys.

Specifications

Size: 5.7” Colour: 256 Colour Resolution: 320x240 Control: RF 433Mhz Video: n/a Direction: One-way

A tabletop mounted 12” 262K true colour monitor with two way wired communication. The powerful touchscreen builder software supports pictures, diagrams, characters, 3D/2D keys and animated pictures. The two way communication allows the user to receive video back to the screen with PIP feature.

Specifications

Size: 12” Colour: 65K Colour Resolution: Wired Control: CR-Net Video: Wired Direction: Two-way

Featuring 3 microphone inputs with parametric equaliser, digital echo and repeat controls, this compact mixer is perfect for home & commercial karaoke systems. The parametric equaliser enables the microphone input to be tailored for the singer. The mixer has 2 line inputs for DVD, CD or laserdisc program source. Separate outputs are provided for mic, line and mixed mic/line. A7 band equaliser is provided for each output to optimise the sound for room acoustics. Includes a video input and two outputs, one for TV and one for a recording VCR or DVD.

Features:

• 3 mic, 2 line inputs • 3 band parametric EQ for mic inputs • 7 band output EQ • Digital echo with adjustable repeat and delay • Video input and 2 video outputs • Compact 1RU design • Front (6.35mm) and rear (3 pin XLR) mic inputs.

Specifications:

Mics: 1.5kΩ Unbalanced Line: 47kΩ Digital Echo: max 300ms delay EQ: 64, 160, 400, 1k, 2.5k, 6.3k & 16kHz THD: 0.01% Freq Response: 20Hz to 20kHz ± 3dB Talkover: -15dB Power: 240V AC Dimensions: Å 482W x 150D x 44.5H mm

Incorporating a sleek modern appearance, the Creator conference system will cater up to 128 delegates. It is ideally suited for use in board rooms, council chambers, hotel conference rooms, training and education facilities. Both the delegates and chairman's deskmount units include a sleek dust proof ‘eye-lid’ which covers the LCD panel and controls when not in use. Utilising the latest digital transmission technology ensures crystal clear reception from all units without feedback or other interference. The chairman's unit controls the entire system, it has the ability to either block or allow delegates to talk. Delegate units incorporate microphone, speaker and buttons to cast votes when called for. Delegates can discretely vote “for”, “abstain”, or “against”. Votes are automatically tallied on the chairman's unit. Installation is simple. All units come complete with a 1.5m lead (other lengths made to order from the factory) and plug directly into the adjacent unit in a ‘daisy-chain’ fashion and then back to the main control unit. A 10m extension lead is available separately if required (A 6646). The main controller power supply unit is either desk or rack mountable and has three output ports for the delegate units. It also provides audio outputs for connection to power amplifiers for gallery sound reinforcement.

Features

• Dust protection cover • Up to 128 delegates per system • Yes, no, abstain voting buttons • LCD panel for voting feedback • Vote tallying at chairman unit • ‘Daisy-chain’ installation • Desktop units equipped with headphone jack, speaker and volume control • High quality electret mic inserts • PTT mic activation • Feedback reduction circuitry • Line in/out on controller for BGM, recording etc. • A second controller may be connected for a further 128 delegates.

Manufactured in Australia to stringent engineering criteria, the Phase 4 amplifier series exhibit remarkable performance and outstanding reliability. Over 2 years in design and development, the evolution of Phase 4 included extensive consultation and input from pro sound contractors and installers across the country. The host of features incorporated commend this amplifier series to the most demanding of pro sound and industrial PA system applications. Redback Phase 4 amplifiers incorporate on demand multi-staged thermally cued fan forced cooling. The output power stage is thermally monitored enabling automatic operation of a long life computer style cooling fan to "off", "low" or "high" air flow through a specially designed tunnel heatsink. In quiescent or ordinary cycle paging mode the fan is inoperative. Over temperature sensing is employed to shut down the amplifier in extreme over heat conditions, eg extreme over load and /or over drive misuse. Re–start is automatic once normal temperatures are attained. The output voltage is limited to 110V maximum RMS voltage irrespective of load impedance to prevent damage to speaker load. Standard 100V line PA amplifiers can deliver up to 180 volts or more under conditions of high drive and very light loading. This output over voltage can quickly destroy any loudspeakers connected. In the event of an overload, the output current is limited by the internal circuitry, thus reducing the output voltage at the speaker terminals. The front panel ‘Overload’ LED flashes, indicating a fault with the speaker circuit.

Features

• Multi-stage thermally cued fan cooling • LED bargraph VU meter • Input signal presence indicator • Output peak limited • 2U 19" rack mount • 3 pin XLR input, 3 pin XLR loop out • Level control rear mounted • 100V, 70V and 4 - 16Ω outputs • Thermal and overload protection • 240V AC, or 24V DC operation • 300mA 24V battery trickle charge • Australian made

Specifications

Power Output: 125 watts RMS Distortion: < 0.5%, @ 1kHz Frequency response: 50Hz - 15kHz, -3dB Output line: 100V, 70V, or 4 - 16Ω Input sensitivity: 500mV balanced Signal to noise ratio:(peak limiting by-passed) > 90 dB Line output: 600Ω balanced, 0dBV Output Connectors Speakers: Screw terminals Line out: 3 pin XLR Trickle charge: Screw terminals Input Connectors Inputs: 3 pin XLR balanced 24V-30V DC power: Screw terminals 240V AC power: IEC power connector Controls Master: Volume (on rear panel) Power: On/off switch Indicators: Power, fault, VU meter, signal present, output peak limiting, overcurrent Power supply: 240V AC or 24V DC (nominal) Fuse Protection: 5A AC and 10A DC Dimensions: ≈ 483W x 330D x 88H Weight: ≈ 12.4kg

Manufactured in Australia to stringent engineering criteria, the Phase 4 amplifier series exhibit quite remarkable performance and outstanding reliability. Over 2 years in design and development, the evolution of Phase 4 included extensive consultation and input from pro sound contractors and installers across the country. The host of features incorporated commend this amplifier series to the most demanding of pro sound and industrial PA system applications. Redback Phase 4 amplifiers incorporate on demand multi-staged thermally cued fan forced cooling. The output power stage is thermally monitored enabling automatic operation of a long life computer style cooling fan to "off", "low" or "high" air flow through a specially designed tunnel heatsink. In quiescent or ordinary cycle paging mode the fan is inoperative. Over temperature sensing is employed to shut down the amplifier in extreme over heat conditions, eg extreme over load and /or over drive misuse. Re–start is automatic once normal temperatures are attained. Output peak limiting. The output voltage is limited to 105V maximum RMS voltage irrespective of load impedance to prevent damage to speaker load. Standard 100V line PA amplifiers can deliver up to 180 volts or more under conditions of high drive and very light loading. This output over voltage can quickly destroy many loudspeakers connected.

Features:

• Multi-stage thermally cued cooling • LED bargraph VU meter • Input signal presence indicator • Output peak limited • 2U 19" rack mount • 3 pin XLR input, 3 pin XLR loop out • Level control rear mounted • 100V, 70V and 4 - 16 Ohm outputs • Thermal and overload protection • 240V AC, or 24V DC operation • 300mA 24V battery trickle charge • Australian made • 10 Year warranty

Specifications:

Power output: 125 Watts RMS Distortion: < 0.5%, @ 1kHz Frequency Response: 50Hz - 15kHz, -3dB Speaker Outputs: 100V, 70V, or 4 - 16 Ohm Sensitivity: 500mV balanced Signal to Noise Ratio:(Peak Limiting By-Passed) > 90 dB Line Output: 600 Ohm balanced, 0dBV Output Connectors: Speakers: Screw Terminals Line Out: 3 pin XLR Trickle Charge: Screw Terminals Input Connectors: Inputs: 3 pin XLR balanced 24V DC Power: Screw Terminals 240V AC Power: IEC Chassis Socket Controls: Master: Volume (on rear panel) Power: On/Off Switch Indicators: Power, Fault, VU Meter, Signal Present, Output Peak Limiting Power Supply: 240V AC or 24V DC (nominal) Protection: 5A AC Fuse and 10A DC Fuse Dimensions: 483W x 407D (Including Handles) x 88H Weight: 12.4kg *Specifications subject to change without notice

This feature packed mixer is perfect for entry level DJs or home karaoke setups. It includes one DJ mic input and two fader controlled output channels. Each output fader can be switched between two inputs. The four inputs can be configured for either four phono sources or two phono plus two line sources ie CD or tape. The 3 band equaliser also features 'kill' switches for low, middle and high bands, enabling the DJ to selectively drop out a frequency band. The crossfader has two 'transform' buttons which instantaneously reverse the function of the crossfader. The headphone socket allows the DJ to cue individual sources and to monitor the output. Requires M9253 10VAC @ 1A plugpack.

Features:

• 3 band EQ on phono & line inputs with 3 band 'kill' attenuators • 4 phono inputs or 2 phono & 2 line inputs • Twin LED VU output displays • Switchable headphone cueing monitor & volume • Talkover or mixed DJ Mic • Master volume sliders • Crossfader with reversing function and curve adjustment selector.

Specifications:

INPUTS Mic 1 & 2: 8.8mV (10k Ohm) Line 1 & 2: 750mV (10k Ohm) Phono 1, 2, 3 & 4: 10.5mV (47k Ohm) OUTPUTS Line: 775mV Headphone: 0.5W Talkover: -16dB Tone: Bass, mid and treble +12dB, -30dB Power: 10V AC Dimensions: 241W x 257D x 145H mm Weight: 3.2kg *Specifications subject to change without notice

Impedance: 8&Omega
Peak power: 60W
Freq. Reponse: 75Hz-20kHz
Dimensions: 150W x 260H x 147D

Rated power: 150W RMS (Active)
Freq. Reponse: 20Hz-250Hz
S/N Ratio: 88dB
Dimensions: 400W x 481H x 400D

Impedance: 8&Omega
Peak power: 80W
Freq. Reponse: 65Hz-20kHz
Dimensions: 535W x 166H x 157D

Assorted crimp lugs to make installation of your car audio system easy and reliable. They are suitable for connecting your speakers, amplifiers, boosters, decks, etc. Gold plated finish.

Assorted crimp lugs to make installation of your car audio system easy and reliable. They are suitable for connecting your speakers, amplifiers, boosters, decks, etc. Gold plated finish.

Assorted crimp lugs to make installation of your car audio system easy and reliable. They are suitable for connecting your speakers, amplifiers, boosters, decks, etc. Gold plated finish.

Assorted crimp lugs to make installation of your car audio system easy and reliable. They are suitable for connecting your speakers, amplifiers, boosters, decks, etc. Gold plated finish.

Assorted crimp lugs to make installation of your car audio system easy and reliable. They are suitable for connecting your speakers, amplifiers, boosters, decks, etc. Gold plated finish.