Handheld transmitter

Transmitters to suit:

Handheld Transmitter: • Exceptional performance • Textured body • Requires 2 x AA batteries, either alkaline (14 hour use) or rechargeable (11 hours use).

This compact portable PA system features a sturdy, lightweight injection moulded cabinet. The system includes a high power 50W (RMS) amplifier and can be supplied with an MP3 compatible anti-skip CD player and up to two wireless microphone receivers. The in-built amplifier has balanced or unbalanced wired microphone inputs, plus line in and line out RCA connection. The radio microphone receivers are 96 channel, allowing easy selection of non-interfering frequencies. Each receiver includes individual frequency
adjustment and volume control. The system is supplied with in-built batteries and charging facility to provide 3-4 hours continuous use. The two way speaker system comprising of 8 inch woofer and high frequency horn ensures excellent sound quality for both music and speech reproduction. Weighing only 12kgs it is truly portable allowing a wide range of use in schools, places of worship, clubs, auctions etc. Sets up in just seconds for instantaneous use.
C 7190 Optional karaoke echo module: For karaoke applications this module includes adjustable repeat and delay, plus two local wired 6.35mm mic inputs.

Transmitters to suit:

Beltpack Transmitter: • Compact & lightweight with metal housing • Fitted with 3.5mm jack socket • On / Off / Mute switch • Requires 2 x AA batteries, either alkaline (14 hour use) or NiMH rechargeable (11 hours use). Note: Beltpacks not supplied with a mic. Handheld Transmitter: • Exceptional performance • Textured body • Requires 2 x AA batteries, either alkaline (14 hour use) or rechargeable (11 hours use).

Features:

• Compact design sets up in just seconds • Rugged lightweight cabinet • MP3 compatible CD player • Inbuilt carry handle • High performance 50W RMS amplifier • Built in backup battery • Optional radio microphone receivers (794-806MHz) • Suitable for desk or speaker stand mounting • Optional wireless link for cable free transmission to additional systems • Optional karaoke echo module • Provision for 8 ohm extension speaker • RCA line input/output • 6.35mm / XLR combination wired microphone input. • 240VAC mains or battery operation

This compact portable PA system features a sturdy, lightweight injection moulded cabinet. The system includes a high power 50W (RMS) amplifier and can be supplied with an MP3 compatible anti-skip CD player and up to two wireless microphone receivers. The in-built amplifier has balanced or unbalanced wired microphone inputs, plus line in and line out RCA connection. The radio microphone receivers are 96 channel, allowing easy selection of non-interfering frequencies. Each receiver includes individual frequency
adjustment and volume control. The system is supplied with in-built batteries and charging facility to provide 3-4 hours continuous use. The two way speaker system comprising of 8 inch woofer and high frequency horn ensures excellent sound quality for both music and speech reproduction. Weighing only 12kgs it is truly portable allowing a wide range of use in schools, places of worship, clubs, auctions etc. Sets up in just seconds for instantaneous use.
C 7189 Optional wireless link transmitter: For larger venues or audiences, the addition of this module allows several units to be used in the same area without the need for speaker or signal wiring. In this situation you have a master and as many slave units as required for the venue. The wireless link module is fitted to the master unit which then transmits any audio signal (including wireless mic, CD player or wired mic) to the slave units, which are fitted with a UHF wireless microphone receiver.

Transmitters to suit:

Beltpack Transmitter: • Compact & lightweight with metal housing • Fitted with 3.5mm jack socket • On / Off / Mute switch • Requires 2 x AA batteries, either alkaline (14 hour use) or NiMH rechargeable (11 hours use). Note: Beltpacks not supplied with a mic. Handheld Transmitter: • Exceptional performance • Textured body • Requires 2 x AA batteries, either alkaline (14 hour use) or rechargeable (11 hours use).

Features:

• Compact design sets up in just seconds • Rugged lightweight cabinet • MP3 compatible CD player • Inbuilt carry handle • High performance 50W RMS amplifier • Built in backup battery • Optional radio microphone receivers (794-806MHz) • Suitable for desk or speaker stand mounting • Optional wireless link for cable free transmission to additional systems • Optional karaoke echo module • Provision for 8 ohm extension speaker • RCA line input/output • 6.35mm / XLR combination wired microphone input. • 240VAC mains or battery operation

This compact portable PA system features a sturdy, lightweight injection moulded cabinet. The system includes a high power 50W (RMS) amplifier and can be supplied with an MP3 compatible anti-skip CD player and up to two wireless microphone receivers. The in-built amplifier has balanced or unbalanced wired microphone inputs, plus line in and line out RCA connection. The radio microphone receivers are 96 channel, allowing easy selection of non-interfering frequencies. Each receiver includes individual frequency
adjustment and volume control. The system is supplied with in-built batteries and charging facility to provide 3-4 hours continuous use. The two way speaker system comprising of 8 inch woofer and high frequency horn ensures excellent sound quality for both music and speech reproduction. Weighing only 12kgs it is truly portable allowing a wide range of use in schools, places of worship, clubs, auctions etc. Sets up in just seconds for instantaneous use.
C 7187 Optional UHF wireless microphone receiver: Installation of this module adds a second wireless microphone to the Portable PA.

Transmitters

Beltpack Transmitter: • Compact & lightweight with metal housing • Fitted with 3.5mm jack socket • On / Off / Mute switch • Requires 2 x AA batteries, either alkaline (14 hour use) or NiMH rechargeable (11 hours use). Note: Beltpacks not supplied with a mic. Handheld Transmitter: • Exceptional performance • Textured body • Requires 2 x AA batteries, either alkaline (14 hour use) or rechargeable (11 hours use).

Features:

• Compact design sets up in just seconds • Rugged lightweight cabinet • MP3 compatible CD player • Inbuilt carry handle • High performance 50W RMS amplifier • Built in backup battery • Optional radio microphone receivers (794-806MHz) • Suitable for desk or speaker stand mounting • Optional wireless link for cable free transmission to additional systems • Optional karaoke echo module • Provision for 8 ohm extension speaker • RCA line input/output • 6.35mm / XLR combination wired microphone input. • 240VAC mains or battery operation

This compact portable PA system features a sturdy, lightweight injection moulded cabinet. The system includes a high power 50W (RMS) amplifier and can be supplied with an MP3 compatible anti-skip CD player and up to two wireless microphone receivers. The in-built amplifier has balanced or unbalanced wired microphone inputs, plus line in and line out RCA connection. The radio microphone receivers are 96 channel, allowing easy selection of non-interfering frequencies. Each receiver includes individual frequency adjustment and volume control. The system is supplied with in-built batteries and charging facility to provide 3-4 hours continuous use. The two way speaker system comprising of 8 inch woofer and high frequency horn ensures excellent sound quality for both music and speech reproduction. Weighing only 12kgs it is truly portable allowing a wide range of use in schools, places of worship, clubs, auctions etc. Sets up in just seconds for instantaneous use.

Transmitters to suit:

Beltpack Transmitter: • Compact & lightweight with metal housing • Fitted with 3.5mm jack socket • On / Off / Mute switch • Requires 2 x AA batteries, either alkaline (14 hour use) or NiMH rechargeable (11 hours use). Note: Beltpacks not supplied with a mic. Handheld Transmitter: • Exceptional performance • Textured body • Requires 2 x AA batteries, either alkaline (14 hour use) or rechargeable (11 hours use).

Features:

• Compact design sets up in just seconds • Rugged lightweight cabinet • MP3 compatible CD player • Inbuilt carry handle • High performance 50W RMS amplifier • Built in backup battery • Optional radio microphone receivers (794-806MHz) • Suitable for desk or speaker stand mounting • Optional wireless link for cable free transmission to additional systems • Optional karaoke echo module • Provision for 8 ohm extension speaker • RCA line input/output • 6.35mm / XLR combination wired microphone input. • 240VAC mains or battery operation

Just what some satisfied customers have to say…

"We tested the Okayo against several competitors, and hands down this was the best sound quality" - Mario Monaco, Monaco Sound "Excellent value, feature packed with a fantastic sound quality, equal to that of much larger portable PA's. I was blown away! Reasonably weighted as well. The best value portable PA on the market!" - Alan Knowles, Alan Knowles Public Address Systems.

This compact portable PA system features a sturdy, lightweight injection moulded cabinet. The system includes a high power 50W (RMS) amplifier and can be supplied with an MP3 compatible anti-skip CD player and up to two wireless microphone receivers. The in-built amplifier has balanced or unbalanced wired microphone inputs, plus line in and line out RCA connection. The radio microphone receivers are 96 channel, allowing easy selection of non-interfering frequencies. Each receiver includes individual frequency adjustment and volume control. The system is supplied with in-built batteries and charging facility to provide 3-4 hours continuous use. The two way speaker system comprising of 8 inch woofer and high frequency horn ensures excellent sound quality for both music and speech reproduction. Weighing only 12kgs it is truly portable allowing a wide range of use in schools, places of worship, clubs, auctions etc. Sets up in just seconds for instantaneous use.

Transmitters to suit:

Beltpack Transmitter: • Compact & lightweight with metal housing • Fitted with 3.5mm jack socket • On / Off / Mute switch • Requires 2 x AA batteries, either alkaline (14 hour use) or NiMH rechargeable (11 hours use). Note: Beltpacks not supplied with a mic. Handheld Transmitter: • Exceptional performance • Textured body • Requires 2 x AA batteries, either alkaline (14 hour use) or rechargeable (11 hours use).

Features:

• Compact design sets up in just seconds • Rugged lightweight cabinet • MP3 compatible CD player • Inbuilt carry handle • High performance 50W RMS amplifier • Built in backup battery • Optional radio microphone receivers (794-806MHz) • Suitable for desk or speaker stand mounting • Optional wireless link for cable free transmission to additional systems • Optional karaoke echo module • Provision for 8 ohm extension speaker • RCA line input/output • 6.35mm / XLR combination wired microphone input. • 240VAC mains or battery operation

Just what some satisfied customers have to say…

"We tested the Okayo against several competitors, and hands down this was the best sound quality" - Mario Monaco, Monaco Sound "Excellent value, feature packed with a fantastic sound quality, equal to that of much larger portable PA's. I was blown away! Reasonably weighted as well. The best value portable PA on the market!" - Alan Knowles, Alan Knowles Public Address Systems.

Extend the life of your portable PA unit with this heavy duty protective padded weather resistant cover (C 7164). Custom designed to fit the C 7152A series, this heavy duty padded cover protects the portable PA unit during transport or field use. No need to remove the cover once fitted, as it has an integral Velcro® flap which allows access to the rear controls. The front flap also folds back, exposing an acoustically transparent mesh panel, enabling the speaker to operate uninhibited. The built-in zip-up accessory pocket stores mains leads, microphones, batteries, CDs and more.

This is a very comprehensive unit and replaces a traditional CD player. It has a USB input for uploading your choice of music from PC to the 64MB internal memory, or it can play files direct from a user-recorded compact flash (CF) card. The unit also has the facility to record to the flash card via the microphone or MP3 inputs.

Suitable for addressing crowds of 500 or more!
Rugged, durable and sturdy would best describe this new Redback® portable PA. The housing is manufactured from die extruded aluminium painted with a hard wearing powder coat finish.
With portability in mind the system is fitted with 'luggage' type trolley wheels and extendable handle.

The system is 'modular' in the sense that you can add 'components' to build the system up from the basic amplifier module. The unit can be enhanced by adding modules such as an MP3 player, UHF radio microphone, or tape deck up to a total of four modules. eg You may choose to fit 2 radio microphones, an MP3 player and a tape deck. This way, it can be configured to suit individual requirements. The circuit includes the latest Class D amplifier design which exhibits very high efficiency, thus reducing the size of the internal batteries and hence overall system weight.

The backbone of the system is the amplifier module and battery power supply. This consists of two normal wired microphone inputs, both with volume controls and overall treble and bass. Separate master volume and treble and bass controls are provided for tailoring the sound of other modules when fitted. The battery charger / power supply will power the unit when away from 240V mains source. It will provide usable power for 6 to 8 hours. Additionally it is supplied with a 12VDC input, allowing operation from a car battery.

Cassette system C 7157: Same as basic system above with the addition of a auto reverse cassette deck with full logic mechanism and record function. Provision is available for up to 2 add-on modules.

Features:

Powerful but portable Modular design allows a unit to be tailored to suit specific applications Tape deck, MP3 player & wireless mic modules available Trolley handle and wheels ¥ Carry handles top and side Desk, floor or stand mounted Sturdy strong design 6 to 8 hours use from internal battery pack Two wired microphone inputs Individual level controls for each module Built in top hat for stand mounting.

Lightweight and easy to operate, this portable PA system with wireless mic receiver is the perfect solution for lecture theatres, shopping centre spruikers, social clubs and more. It features a 16 channel wireless microphone system enabling the speaker to move through the audience freely without trailing a microphone cable. Provision is also included for a wired microphone input for stationary use, which may be used simultaneously with the wireless mic. This would be ideal for use in a 'question and answer' forum at meetings.
Wireless range is up to 50m in ideal conditions. The unit can be powered from 240V mains, 12VDC (eg: for use in automotive or marine applications) or via internal batteries, making it suitable for a host of applications.

See C8872 and C8875 for suitable wireless microphones.

Features

Sturdy cabinet with carry handle Lightweight & easy to operate High efficiency loudspeaker PLL synthesised circuitry 16 channels in 790-806MHz UHF band Wired and wireless mic can be used simultaneously Operates from 240VAC, battery or external DC power

Specifications:

Frequency Range: UHF band, 790-806MHz Speaker Output: 8W RMS (via 6" speaker) Receiving System: PLL Synthesised, 16 Channel Receiving Mode: FM Frequency Stability: @ 8dBmV/ 80dB S/N Ratio Image & Spurious Rej.: 80dB minimium Selectivity: >50dB Modulation Mode: FM IF Frequency: 1st: 56MHz, 2nd: 10.7MHz Dynamic Range: >96dB Tone Signal: 32.768KHz S/N Ratio: >94dB, @ 48KHz deviation & 60dBmV antenna input AF Response: 50Hz to 15KHz (±3dB) T.H.D.: <1.0% @ 1KHz Power Supply: 240VAC/ 12VDC/ 6 x 1.5V 'C' Batteries Audio Ouput: Unbalanced output: 800mV (load: 32W) Dimensions (mm) WxHxD: 210 x 273 x 120 Weight: 1.9kg

A fully sealed 4 inch midrange speaker with doped paper cone and long lasting rubber surround.

Specifications:

Input power: 30W Max input power: 50W Impedance: 8Ω Sensitivity: 89dB 1W, 1m Resonant frequency: 450Hz Frequency response: 280Hz-12KHz Voice coil diameter: 20mm Cutout diameter: 97mm Mounting depth: 47mm

380mm (15") Add some class to your speaker cabinets with this professional series of mesh grills. Sturdy steel construction features plastic surround and open grid appearance. Suitable for sound reinforcement enclosures, DJ speakers, car audio subwoofer boxes. Each includes 4 fixing clamps. Black only.

300mm (12") Add some class to your speaker cabinets with this professional series of mesh grills. Sturdy steel construction features plastic surround and open grid appearance. Suitable for sound reinforcement enclosures, DJ speakers, car audio subwoofer boxes. Each includes 4 fixing clamps. Black only.

250mm (10") Add some class to your speaker cabinets with this professional series of mesh grills. Sturdy steel construction features plastic surround and open grid appearance. Suitable for sound reinforcement enclosures, DJ speakers, car audio subwoofer boxes. Each includes 4 fixing clamps. Black only.

200mm (8") Add some class to your speaker cabinets with this professional series of mesh grills. Sturdy steel construction features plastic surround and open grid appearance. Suitable for sound reinforcement enclosures, DJ speakers, car audio subwoofer boxes. Each includes 4 fixing clamps. Black only.

165mm (6.5") Add some class to your speaker cabinets with this professional series of mesh grills. Sturdy steel construction features plastic surround and open grid appearance. Suitable for sound reinforcement enclosures, DJ speakers, car audio subwoofer boxes. Each includes 4 fixing clamps. Black only.

A high-power active line array specifically designed for use for large PA applications such as clubs, concert venues, amphitheatres etc. In keeping with their professional PA application, the cabinets are manufactured from rugged 9-ply birch laminate plywood finished with hard-wearing black lacquer and steel grilles. The twin 12” bass unit contains a built-in fan-cooled high power amplifier and adjustable active crossover for fine tuning the system output. The four mid/high cabinets each contain twin 6.5” drivers and two 2” PA tweeters and have a variable vertical angle adjustment with locking pins for tailoring the sound coverage to suit the venue. May be hung from a speaker rig using the built-in hardpoints or mounted to a ceiling with the C 1221 bracket. Multiple units may be daisy chained together to form an even larger PA system. Supplied as a complete system, with active subwoofer cabinet and four mid/high cabinets, in two sturdy flight cases with wheels.

Specifications:

Subwoofer amplifier power: 2 x 350W RMS Line array amplifier power: 2 x 350W RMS Input sensitivity: 0.775V Inputs: 1 x balanced 3 pin XLR Outputs: 2 x Speakon (to mid/high cabs) 1 x balanced 3 pin XLR (for daisy chain) 1 x 240V power connector (for daisy chain) High pass tuning: 80 - 200Hz -3dB Low pass tuning: 50 - 250Hz -3dB Bass Speaker Impedance: 4Ω Input power: 700W RMS, 1400W max Frequency response: 30Hz - 250Hz SPL: 101dB 1W@1m Size: 404H x 548W x 852D Weight (in flight case): 97kg Mid/High Speaker (4 cabinets) Impedance: 8Ω Input power: 175W RMS, 350W max Frequency response: 80Hz - 15kHz SPL: 97db 1W @ 1m Dispersion angle: 90° horiz, 15° vert Suspension angle: 0° - 15° Dimensions: 180H x 548W x 324D Weight (in flight case): 85kg

** Minimum purchase of 10 units ** Designed specifically to be installed with the Redback 'One-Shot' ceiling speakers, these pans support the ceiling tile to minimise sag. Recommended for softer material ceiling tiles.

** Minimum purchase of 10 units ** Designed specifically to be installed with the Redback 'One-Shot' ceiling speakers, these pans support the ceiling tile to minimise sag. Recommended for softer material ceiling tiles.

Typical applications

Medical centres, shopping malls, restaurants, boutiques, hotel foyers, apartments, offices, games rooms, home theatre systems, etc.

For applications where high power, high performance sound reproduction is required, ie. bars, boutiques, clubs etc. Supplied with a 15W 100V transformer.

Now with 4 way terminal block & capacitor for Fire/Evac installations!

Specifications:

Power Taps : 1.25, 2.5, 5, 10, 15 Watts Frequency Response: 45Hz-20kHz Resonant Frequency: 40Hz SPL 1W @ 1m: 89dB Tweeter Voice Coil Ø: 13mm Driver Voice Coil Ø: 25mm Ceiling cutout: 185mmØ

The perfect choice for harsh industrial environments. A wide operating temperature range, coupled with an IP67 rated enclosure make this horn speaker suitable for a vast range of applications. It is resistant to corrosion and chemicals. The housing is UV stabilised which allows exposure to full sun. Several power taps are available via a 7 core cable, including both 100V and 8 Ohm selections. Stainless steel hardware ensures rust resistance. Audio performance has not been sacrificed with excellent efficiency & frequency response ratings. Can be flush ceiling mounted if required

Features

• IP67 dust & moisture rated • UV stabilised • -50°C to 100°C for harsh environments • 8 Ohm or 100V tappings • Recessed bracket with stainless steel hardware • Corrosion, chemical & fire resistant

Specifications

Power taps: 1, 3, 6, 9, 12W & 8 Ohm Freq. response: 600Hz - 11kHz Dispersion angle: 185° @ 1KHz SPL 1W @ 1m: 102dB Dimensions (mm): 143Ø x 110D Weight: 1.05kg

A unique innovation in horn speakers. A combination of re-entrant low/mid driver with a high frequency loaded horn culminates in breath taking clarity and sound pressure level for relatively wide range reproduction. It is eminently suited to outdoor applications where a very high standard of speech and music reproduction is demanded eg: schools gymnasiums, aquatic centres, sporting arenas, stadiums, railway stations etc. Adjustable power setting is included. The speaker is weather resistant, incorporates an aluminum mounting bracket and has an IP65 rating. Manufactured from high impact ABS plastic.

Features:

Unique combination re-entrant horn and high frequency driver Tough ABS construction Aluminium mounting bracket IP65 Weatherproof Construction Selectable 100V line power taps 3.75, 7.5W, 15W & 30W High efficiency drivers and transformer

Specifications:

Power Rating: 30W RMS Power Taps (100V): 30/15/7.5/3.75 SPL 1W @ 1m: 98dB Freq. Response: 65Hz - 16.5kHz Dimensions: 442W x 260H x 288D mm Colour: Grey Weight: 12kg

Flare ONLY

Reflex horn speakers are ideally suited for open air paging applications where speech clarity is of prime importance. Typical uses include fairs, sporting venues, auctions, fetes etc. Constructed from spun aluminium, the massive 540mm flare is designed to be fitted with a compression driver. Rated to IP66 and supplied with stainless steel mounting bracket & fixings, making it suitable for permanent outdoor installations.

Flare ONLY

Reflex horn speakers are ideally suited for open air paging applications where speech clarity is of prime importance. Typical uses include fairs, sporting venues, auctions, fetes etc. Constructed from spun aluminium, the massive 540mm flare is designed to be fitted with a compression driver. Rated to IP66 and supplied with stainless steel mounting bracket & fixings, making it suitable for permanent outdoor installations.

Flare ONLY

Reflex horn speakers are ideally suited for open air paging applications where speech clarity is of prime importance. Typical uses include fairs, sporting venues, auctions, fetes etc. Constructed from spun aluminium, the massive 540mm flare is designed to be fitted with a compression driver. Rated to IP66 and supplied with stainless steel mounting bracket & fixings, making it suitable for permanent outdoor installations.

18 inch Flare ONLY

Reflex horn speakers are ideally suited for open air paging applications where speech clarity is of prime importance. Typical uses include fairs, sporting venues, auctions, fetes etc. Constructed from spun aluminium, the massive 540mm flare is designed to be fitted with a compression driver. Rated to IP66 and supplied with stainless steel mounting bracket & fixings, making it suitable for permanent outdoor installations.

The REDBACK® 20W plastic horn speaker is designed primarily for distributed paging systems where a high degree of speech articulation and program clarity is paramount.
Typical applications include schools, train and bus stations, airports, car parks and plant rooms. A screwdriver adjustable power tap switch is provided as is a 22uf bipolar isolation capacitor to permit line monitoring function when employed with emergency PA and EWIS installations. A 4 core loop through lead is also provided. Features nickel-chromium plated mild steel hardware making them ideal for aquatic centre installations and alike.

Specifications

Power Taps: 5, 7.5, 10, 15, 20W Sound Pressure Level: 108dB, 1W @ 1m, 121dB, 20W @ 1m Frequency. Response: 275Hz - 10kHz Dispersion Angle: 70° Flare Dimensions (mm): 212Ø x 285D

Based on the popular C 2049 Redback horn speaker this all new release
has been developed to offer similar performance at a substantially
reduced price.

Although this speaker is suitable for general paging applications, it has been primarily
designed with emergency evacuation systems in mind. It is supplied with an in-built
bipolar capacitor making it compatable with EWIS control systems utilising line monitoring
circuitry. It is also fitted with a 4 core termination lead to provide connection points for loop
in, loop out wiring, as required by Australian Standards.

Compact yet very efficient with a high SPL of 104dB, 1W @ 1m. This horn speaker is ideal
for car parks, plant rooms, industrial plants, schools, train/bus stations and airports etc.
It offers a high degree of speech articulation and program clarity which is essential to meet
todays demanding evacuations standards.

A screwdriver adjustable switch is provided to select the desired power tapping.

Supplied with nickel plated chrome hardware.

Specifications

Power taps: 1.25, 2.5, 5, 7.5, 10W SPL 1W@1m: 104dB SPL Max Tap @1m: 114dB Freq. response 480Hz - 10kHz Dispersion angle: 110° Dimensions (mm): ˜180Ø x 255D

Features

Tough UV stabilised plastic Emergency evacuation system ready High SPL performance Excellent speech intelligibility Outstanding reproduction quality Multi-tap transformer IP-66 rated Neutral grey colour

They say necessity is the mother of all inventions. We’re not sure about that but we are certain that this natty ‘speed fixer’ will make mounting the C 2053 horn speaker a breeze! A world first in horn speaker mounting aids. Normal horn speaker installation requires removing the mounting ‘U’ bracket, fixing to the wall, and then reassembling. Very time consuming and labour intensive. Enter the Wurli-gig! Its a simple matter of mounting it to the wall and the horn speaker, with bracket still fitted, snap fits in seconds! The incredible Wurli-Gig speed fixer saves 3-4 minutes per horn installation and this equates to around $10 with todays installer labour rates. Provision for anti-theft screws.

Features:

- Saves time and money. Up to 70% faster than conventional methods of horn speaker installation - No need for expensive fixings. Installs with standard green wall plugs and 8G self tappers costing only cents - On an installation of 50 horns, the savings on labour and fixings would be around $500 to $600 - Quick and easy snap fit installation for C 2053 and C 2056 Redback Horn models - Luran 'S' UV stabilised plastic

This horn is compact, lightweight, weatherproof and very efficient. The voice coil is wound on an aluminium bobbin providing effective heat transfer from the coil thereby improving the efficiency and reliability of the speaker. The horn is IP65 rated and is constructed from heavy duty ABS.The sturdy mounting bracket is powdercoated and secured with nickel-chromium plated mild steel hardware.

Specifications:

Impedance: 8Ω Power Rating: 25W IP Rating: IP65 SPL: 108dB, 1W @ 1m Freq. Resp.: 250Hz - 10kHz Dimensions: 300 x 180 x 290mm

Excellent low cost re-entrant horn speaker All aluminium construction. Suitable for outdoor applications. Suitable for PA systems, CB extension speakers, alarms etc.

Specifications:

Colour: Dark grey Power Rating: 25W SPL 1W@1m: 105dB Freq. Response: 350-7KHz Dimensions: 200 x 140 x 220mm

Mounting Bracket for C1221

Cast fixing point for the C 1036 and C 1038 Biema speakers. These points are designed for club and stage installations requiring a "flying" speaker configuration using steel cable or chain supports.

Self drilling, self tapping screw for gypsum or plaster-board ceilings. Designed for use with battery operated drills. Suits C 0805 and C 0815 Super Slimline speaker grills. Pk 1000

Registered Design

Self drilling, self tapping screw for gypsum or plaster-board ceilings. Designed for use with battery operated drills. Suits C 0805 and C 0815 Super Slimline speaker grills. Pk 100

Registered Design

Self drilling, self tapping screw for gypsum or plaster-board ceilings. Designed for use with battery operated drills. Suits C 0805 and C 0815 Super Slimline speaker grills. Pk 12

Registered Design

A compact polymer dome tweeter for use in bookshelf or satellite/surround speakers. Features dispersion vanes for even sound field distribution.

Specifications:

Rated Input Power: 15W Max Power Input: 30W Impedance: 8Ω Frequency Resp.: 4kHz - 20kHz Sensitivity (1w @ 1m): 88dB Voice Coil Diameter: 19.4mm Nett Weight: 78g Overall Diameter: 73mm Cutout Diameter: 50mm Mounting Depth: 17mm

Magnetically shielded ferro-fluid tweeter specifically for use in high performance speaker systems. Ideal for use in Home Theatre front of house and centre speakers. Will not affect television screens.

Specifications:

Rated Input Power: 30W Max Power Input: 50W Impedance: 8Ω Frequency Resp.: fo-20kHz Resonant Frequency: 1000Hz Sensitivity (1w @ 1m): 90dB Voice Coil Diameter: 25.4mm Nett Weight: 480g Magnet Weight: 181g Overall Diameter: 100mm Cutout Diameter: 78mm Mounting Depth: 33mm

Ideal for high fidelity applications requiring high power. Aluminium facia panel provides a stylish finish to any multi channel speaker system.

Specifications

Rated power: 80W Max power: 120W Impedance: 8 Ohm Freq response: 2kHz - 20kHz Resonant frequency: 2kHz SPL 1W @ 1m: 93dB Voice coil diameter: 25.4mm Nett weight: 520g Magnet weight: 228g Overall diameter: 100mm Cutout diameter: 73mm Mounting depth: 28mm

Ideal for PA, CB extension speakers, boats and alarms etc. White PVC construction. Swivel bracket included.
Flare dimensions: 135mm Ø.

These drivers employ polypropylene cones with a foam edge down rolled. This, coupled with a centrally mounted tweeter and midrange assembly, gives an excellent overall performance. Ideal for high performance, high power PA installations, foreground music systems, ceiling mount Hi-Fi extension speakers, etc. 50 Watts RMS 100W Max

Specifications:

Rated Power Input: 50w Max Input Power: 100w Impedance: 8Ω Frequency Response: 40Hz-20kHz Resonant Frequency: 40Hz SPL (1W @ 1m): 92dB Tweeter Voice Coil Ø: 13mm Driver Voice Coil Ø: 25mm Cutout diameter: 185mm Mounting depth: 85mm

High midrange efficiency suited for use in BGM and paging systems. Diagonal mounting hole centres at 195mm. Magnet includes 3 x 4mm Ø tapped holes, 10mm deep at 51 and 60mm centres for mounting a speaker transformer.

Specifications:

Input Power: 30 Watts RMS Max Input Power: 50 Watts Impedance: 8Ω Resonant Frequency: 45Hz Frequency Response: 45Hz - 18kHz SPL (1w @ 1m): 90dB

Designed primarily for PA and background music applications. Magnet includes transformer mounting holes at 51mm.
Diagonal mounting hole centres at 195mm.

Specifications:

Input Power: 5 Watts RMS Max Input Power: 10 Watts Impedance: 8Ω Resonant Frequency: 80Hz Frequency Response: 80Hz - 18kHz SPL (1w @ 1m): 92dB

The REDBACK® sound projector is made from strong UV stabilised ABS plastic with a perforated metal grill. It is designed for use in 100V line distributed systems. Sound projectors offer a wide dynamic range making them ideal for both paging and background music applications. Typical applications include sport stadiums, train station platforms, shopping centres, aquatic arenas, etc.

Features:

Tough UV stabilised high impact ABS construction Durable powdercoated mounting bracket Stainless Steel fixings Exceptional music and speech reproduction Selectable power taps Uses a high efficiency driver and line transformer Suitable for indoor or outdoor use Includes 7-core cable for easy installation

Specifications:

Rating: 20W Power Taps: 20, 10, 5, 2.5W SPL 1W @ 1m: 92dB Freq. Resp.: 110Hz - 20kHz Dimensions: 180Ø x 195D mm Weight: 1.9kg

These active line array speakers are an excellent choice for high power systems. Generally, these would be suspended by appropriate hardware from a truss or ceiling mounted for permanent installations. Consists of a powerful subwoofer complete with all amplifiers and electronic controls, plus 4 mid/high cabinets. The four mid/high cabinets are suspended from the subwoofer by way of adjustable brackets and locking pins. The angle of which can be varied to suit the venue.

C 1218: This compact system employs a dual 8” subwoofer cabinet with 4 mid/high cabinets fitted with 2 x 4” mid drivers plus a high performance ribbon tweeter. Suitable for gymnasiums, places of worship, small theatres. Includes suspension frame.

Specifications

Subwoofer amplifier power:400W RMS Line array amplifier power: 400W RMS Input sensitivity: 0.775V Inputs: 1 x balanced 3 pin XLR Outputs: 1 x Speakon (to mid/high cabs), 1 x balanced 3 pin XLR (for daisy chain) High pass tuning: 80 - 200Hz -3dB Low pass tuning: 50 - 250Hz -3dB Bass Speaker Impedance: 4O Input power: 400W RMS, 600W max Frequency response: 60Hz - 250Hz SPL: 97dB 1W@1m Size: 265H x 466W x 537D Weight: 22.8kg Mid/High Speaker (per cabinet) Impedance: 16O Input power: 100W RMS, 250W max Frequency response: 120Hz - 25kHz SPL: 92db 1W @ 1m Dispersion angle: 90° horiz, 12° vert Suspension angle: 0° - 12° Dimensions: 134H x 466W x 217D Weight: 5.3kg

The spherical speaker enclosure and parabolic shaped reflector combine to create an omni-directional loud speaker, allowing 360° horizontal sound dispersion. With an unobtrusive modern design, these ball speakers are designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in large open areas with very high raked, suspended, concrete, or exposed ceilings. Typically these type of ceilings will be found in churches, gymnasiums, train stations, airports, factories, markets, shopping centres, indoor swimming pools etc. Fitted with high efficiency drivers, they are ideal for high ambient noise locations and offer extremely articulate reproduction making them ideal for both background music and paging applications.
Supplied complete with stainless steel wire suspension kit allowing the speaker to be installed from 1 fixing point. This model is fitted with a high efficiency 100 volt line matching transformer.

Specifications:

Driver Size: 300mm (12") Power Taps: 50, 100, 150, 200 & 300W SPL 1W @ 1m: 97dB Frequency Resp.: 40Hz - 15.5kHz, ±6dB Coverage: 180° Vertical, 360° Horizontal Weight: 22kg Material: Fibreglass Dimensions: 720W x 790H mm

The spherical speaker enclosure and parabolic shaped reflector combine to create an omni-directional loud speaker, allowing 360° horizontal sound dispersion. With an unobtrusive modern design, these ball speakers are designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in large open areas with very high raked, suspended, concrete, or exposed ceilings. Typically these type of ceilings will be found in churches, gymnasiums, train stations, airports, factories, markets, shopping centres, indoor swimming pools etc. Fitted with high efficiency drivers, they are ideal for high ambient noise locations and offer extremely articulate reproduction making them ideal for both background music and paging applications.
Supplied complete with stainless steel wire suspension kit allowing the speaker to be installed from 1 fixing point. This model is fitted with a high efficiency 100 volt line matching transformer.

Specifications:

Driver Size: 200mm (8") coaxial Power Taps: 20, 40, 80 & 120W SPL 1W @ 1m: 94dB, Frequency Resp.: 40Hz - 19kHz, ±6dB Coverage: 180° Vertical, 360° Horizontal Weight: 9.7kg Material: Fibreglass Dimensions: 510W x 490H mm

The spherical speaker enclosure and parabolic shaped reflector combine to create an omni-directional loud speaker, allowing 360° horizontal sound dispersion. With an unobtrusive modern design, these ball speakers are designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in large open areas with very high raked, suspended, concrete, or exposed ceilings. Typically these type of ceilings will be found in churches, gymnasiums, train stations, airports, factories, markets, shopping centres, indoor swimming pools etc. Fitted with high efficiency drivers, they are ideal for high ambient noise locations and offer extremely articulate reproduction making them ideal for both background music and paging applications.
Supplied complete with stainless steel wire suspension kit allowing the speaker to be installed from 1 fixing point. This model is fitted with a high efficiency 100 volt line matching transformer.

Specifications:

Driver Size: 200mm (8") coaxial Power Taps: 14, 27 & 55W SPL 1W @ 1m: 92dB, Frequency Resp.: 60Hz - 16kHz, ±6dB Coverage: 180° Vertical, 360° Horizontal Weight: 8.9kg Material: Fibreglass Dimensions: 510W x 480H mm

Flush mount ceiling bracket for C 1070

The spherical speaker enclosure and parabolic shaped reflector combine to create an omni-directional loud speaker, allowing 360° horizontal sound dispersion. With an unobtrusive modern design, these ball speakers are designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in large open areas with very high raked, suspended, concrete, or exposed ceilings. Typically these type of ceilings will be found in churches, gymnasiums, train stations, airports, factories, markets, shopping centres, indoor swimming pools etc. Fitted with high efficiency drivers, they are ideal for high ambient noise locations and offer extremely articulate reproduction making them ideal for both background music and paging applications. Supplied complete with stainless steel wire suspension kit allowing the speaker to be installed from 1 fixing point. This model is fitted with a high efficiency 100 volt line matching transformer.

Specifications:

Driver Size: 165mm (6.5") coaxial Power Taps: 7, 15 & 35W SPL 1W @ 1m: 92dB Frequency Resp.: 80Hz - 16kHz, ±6dB Coverage: 180° Vertical, 360° Horizontal Weight: 4kg Material: Structural Polystyrene Dimensions: 380W x 290H mm

Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in such areas as very high raked, suspended, concrete, or exposed ceilings. Installation requires a single fixing with connection concealed within the ceiling rose provided. This model is fitted with a high efficiency 165mm (6.5") twin cone 30W driver, 100V line transformer and features IEC529 IP35 water protection.

Specifications:

Power Taps: 8Ω, 5, 10, 15, 20, 30W SPL 1W @ 1m: 91dB Freq. Resp.: 100Hz - 20kHz Weight: 3kg Colour: White Material: ABS Plastic Cable Length: 5M Overall Diam.: 260mm approx.

Designed for use where traditional ceiling mounted speakers are difficult or impractical to install. Used in such areas as very high raked, suspended, concrete, or exposed ceilings. Installation requires a single fixing with connection concealed within the ceiling rose provided. This model is fitted with a high efficiency 133mm (5.25") twin cone 15W driver and a 100V line transformer.

Specifications:

Power Taps: 5, 10 & 15 W SPL 1W @ 1m: 90dB Freq. Resp.: 80Hz - 20kHz Weight: 1.8kg Colour: White Material: ABS Plastic Cable Length: 4M Overall Diam.: 190mm approx.

An immensely powerful 18” active subwoofer which may be used as a standalone unit, or as part of a complete PA system with the C 1029 or C 1031 speakers. When used with a set of satellites, the C 1049 forms a powerful mobile PA system perfect for small bands, entertainers, DJs etc.
The system comprises three separate internal amplifiers; one powers the subwoofer speaker; the other two provide 300W RMS for each satellite speaker. Or the satellite outputs can be bridged together to provide a single 900W RMS mono output.
This transforms it into a single 1800W 2 way powered stack. A built-in 3 band equaliser allows fine tuning of the system output.
Connections to the satellite speakers are via standard 4 pin speaker connectors. The cabinet is fitted with heavy duty castor wheels for ease of movement and accepts the C 0519 speaker pole in the top of the cabinet for mounting of a satellite speaker.

Specifications:

Subwoofer amp power: 900W continuous Satellite amp power: 300W RMS x 2 (8½), 900W bridged Inputs: 2 x balanced 3 pin XLR, 2 x unbalanced 6.35mm Outputs: 2 x Speakon (to satellites) EQ (±10dB): Low: 75Hz, Mid: 1.3kHz, High: 10kHz Low pass tuning frequency: 50-250Hz -3dB Freq response: 38Hz-500Hz SPL: 101dB 1W@1m, 138dB Max Dimensions: 650H x 530W x 800D Weight: 71kg

The Biema Stage Series Professional Speakers are engineered for 'Front of House' use in commercial PA systems. They are built tough to cope with the rigours of touring or permanent venue installations. The cabinets are manufactured using the latest CNC machinery ensuring a world-class finish. They are painted with a tough, durable, long-lasting coating to ensure many years of service. The drivers have been carefully chosen to provide massive power handling, superb frequency response and high efficiency. They are the perfect partner to the Biema audio power amplifiers.

This horn enclosure is fitted with a massive 18" driver and is designed specifically for sub-bass reproduction. It produces a prodigious level of bass and handles up to a huge 1200W. The rugged, solidly built enclosure is fitted with caster wheels for ease of movement. Fitted with standard 4 pin speaker connectors.

Specifications

Input power: 600W continuous, 1200W peak Impedance: 8Ω Freq response: 38Hz-500Hz SPL 1W @ 1m: 100dB Max SPL: 131dB Dimensions: 650H x 560W x 793D Weight: 60kg

The Biema Stage Series Professional Speakers are engineered for 'Front of House' use in commercial PA systems. They are built tough to cope with the rigours of touring or permanent venue installations. The cabinets are manufactured using the latest CNC machinery ensuring a world-class finish. They are painted with a tough, durable, long-lasting coating to ensure many years of service. The drivers have been carefully chosen to provide massive power handling, superb frequency response and high efficiency. They are the perfect partner to the Biema audio power amplifiers.

Incorporating a massive 18" bass driver, this three way system is the perfect 'full range' solution for commercial systems.
It features a sealed midrange enclosure and horn tweeter. The enclosure is a trapezoidal section bass reflex design, providing extended bass response and minimising standing waves within the cabinet. Fitted with loop in/out industry standard 4 pin speaker connectors.

Specifications

Input power: 500W continuous, 1000W peak Impedance: 8Ω Freq response: 35Hz-19kHz SPL 1W @ 1m: 96dB Max SPL: 128dB Dispersion: 90° Horizontal, 70° Vertical Dimensions: 1100H x 530W x 530D Weight: 60kg

The Biema Stage Series Professional Speakers are engineered for 'Front of House' use in commercial PA systems. They are built tough to cope with the rigours of touring or permanent venue installations. The cabinets are manufactured using the latest CNC machinery ensuring a world-class finish. They are painted with a tough, durable, long-lasting coating to ensure many years of service. The drivers have been carefully chosen to provide massive power handling, superb frequency response and high efficiency. They are the perfect partner to the Biema audio power amplifiers.

A classic 3-way front of house system incorporating a 15" bass driver, sealed midrange enclosure and horn tweeter. The enclosure is a trapezoidal section bass reflex design, providing extended bass response and minimising standing waves within the cabinet. Fitted with loop in/out industry standard 4 pin speaker connectors.

Specifications

Input power: 400W continuous, 800W peak Impedance: 8Ω Freq response: 45Hz-19kHz SPL 1W @ 1m: 97dB Max SPL: 126dB Dispersion: 90° Horizontal, 70° Vertical Dimensions: 880H x 500W x 500D Weight: 36kg

With a wide frequency response, high power handling and high efficiency, these rugged two way
speakers are designed for the rigours of PA hire or band use. They are the perfect partner for the C 1049 18” active subwoofer unit and are equally at home when used as full-range speakers. The wedgeshaped design minimises internal acoustic reflections. Fitted with carry handles, standard 4 pin speaker socket & top hat for stand mounting.

Specifications:

Input power: 600W RMS Impedance: 8Ω Freq response: 60Hz-18kHz SPL: 99dB 1W@1m, 129dB Max Dimensions: 650H x 420W x 400D Weight: 32kg

Intended for top-line, high power PA systems, this speaker consists of a powerful 12” bass driver and a compression driver tweeter in a rugged bass reflex enclosure. It may be installed as floor standing, suspended, or mounted on a speaker stand. The huge bass driver has a solid die-cast magnesium frame with massive magnet and heavy duty cone suspension system. The enclosure
is manufactured from solid plywood and is fitted with heavy duty internal steel bracing to eliminate flexing under high input power conditions. The cabinet is internally coated with a special acoustic material for optimum damping. Fitted with standard 4 pin speaker socket & top hat for stand mounting.

Specifications:

Input power (RMS): 450W Peak power: 900W Impedance: 8Ω Freq response: 60Hz-18kHz SPL 1W @ 1m: 97dB Max SPL: 127dB Dimensions: 640H x 400W x 388D Weight:37kg

A high powered active speakers series identical in performance and construction to the unpowered units, each include a self-contained power amplifier. Simply connect 240VAC power and an input source such as a CD player, tape deck or microphone and you have a crystal clear, high powered PA system! Accept either XLR balanced or 6.35mm unbalanced mic input, and XLR or RCA line level input. Each unit also have XLR and 6.35mm line out connectors, allowing multiple powered speakers to be ‘daisy chained’ from a single input source. Using two of these units connected together to one microphone, you could easily address a crowd of 1000 people! The power amp has separate volume controls for mic input, line input and master output, plus bass and treble controls.

Features

• Rugged moulded ABS construction • Cast aluminium frame bass driver with large voice coil diameter • Inbuilt top hat mount and carry handle • Wide frequency response • Titanium diaphragm compression driver • 4 rigging points

Specifications

Power: 250W RMS Impedance: 8Ω SPL (1W @ 1m): 96.5dB Frequency Response: 40Hz - 17kHz Rigging Threads: M6 Dimensions: 420 x 355 x 685mm Weight: approx 28kg

Black powdercoated steel bracket specifically designed to suit the C1008 club speaker. Comes included with the required hardware to mount the speaker to the bracket.

Available in sizes from 10” to 15”, these speakers are housed in rugged wedge shaped nylon fibre and ABS moulded cabinets. Designed with portability in mind the cabinets include an inbuilt carry handle and are easily transported. Whilst they are lightweight, they offer extreme durability and strength.
Provision has been made to allow the speakers to be stacked on top of each other and an inbuilt top hat allows stand mounting. Floor stands are also provided for the 12” (C 1004A) and 15” (C 1008A) models, allowing the speakers to be side mounted when used in foldback applications. 4 inbuilt rigging points allow the units to be suspended using eye bolts.

The horn flare is moulded as part of the cabinet and fitted with a titanium diaphragm compression driver. The main bass speakers are manufactured with rugged heavy duty diecast aluminium frames.

Connections are made with industry standard 4 pole speaker connectors ie: one for in and one for out. Boasting excellent frequency characteristics, these speakers are the perfect choice for both hire and installation companies.

Features:

Rugged moulded ABS construction Cast aluminium frame bass driver High performance large voicecoil diameter Wide frequency response Titanium diaphragm compression driver

Specifications:

Rating: 250W (RMS) Impedance: 8 Ohm SPL (1W @ 1m): 97dB Frequency Resp: 40Hz - 20kHz Dimensions: 430 x 355 x 685mm Weight: 26.5kg

NEW MODEL FEATURES BI-AMPLIFICATION - SEPARATE AMPLIFIERS FOR WOOFER AND TWEETER - OFFERING ENHANCED SOUND QUALITY

These high powered active speakers are identical in performance and construction to their unpowered counterparts, though they also include a self-contained power amplifier. Simply connect 240VAC power and an input source such as a CD player, tape deck or microphone and you have a crystal clear, high powered PA system! Accepts either XLR balanced or 6.35mm unbalanced mic input, and XLR or RCA line level input.

Each unit also has XLR and 6.35mm line out connectors, allowing multiple powered speakers to be ‘daisy chained’ from a single input source. Using two of these units connected together to one microphone, you could easily address a crowd of 1000 people!

The power amp has separate volume controls for mic input, line input and master output, plus bass and treble controls.

Housed in rugged wedge shaped nylon fibre and ABS moulded cabinets these speakers are designed with portability in mind. The cabinets include an inbuilt carry handle and are easily transported. Whilst they are lightweight, they offer extreme durability and strength.

Provision has been made to allow the speakers to be stacked on top of each other and an inbuilt top hat allows stand mounting. Floor stands are provided with this model, allowing the speaker to be side mounted for when used in foldback applications.

The horn flare is moulded as part of the cabinet and fitted with a titanium diaphragm compression driver. The main bass speakers are manufactured with rugged heavy duty diecast aluminium frames.

Connections are made with industry standard 4 pole speaker connectors ie: one for in and one for out. Boasting excellent frequency characteristics, these speakers are the perfect choice for both hire and installation companies.

4 inbuilt rigging points allow the unit to be suspended using eye bolts.

Features

Rugged moulded ABS construction Cast aluminium frame bass driver with large voice coil diameter Inbuilt top hat mount and carry handle Wide frequency response Titanium diaphragm compression driver 4 rigging points

Specifications:

Power Output: 200W (RMS) Amplifier Distortion: 0.15% Crossover Specs.: 2.5KHz, 12dB/Oct SPL (1W @ 1m): 95.5dB Signal to noise: -82db Frequency Resp: 40Hz - 17KHz Inputs: XLR line, RCA line, XLR mic, 6.35mm mic Outputs: XLR line, 6.35mm line Controls: mic volume, line volume, master volume, bass, treble Protection: 5A, 250V Dimensions: 430 x 310 x 580mm Weight: 21kg

Black powdercoated steel bracket specifically designed to suit the C1004 club speaker. Comes included with the required hardware to mount the speaker to the bracket.

Available in sizes from 10” to 15”, these speakers are housed in rugged wedge shaped nylon fibre and ABS moulded cabinets. Designed with portability in mind the cabinets include an inbuilt carry handle and are easily transported. Whilst they are lightweight, they offer extreme durability and strength.
Provision has been made to allow the speakers to be stacked on top of each other and an inbuilt top hat allows stand mounting. Floor stands are also provided for the 12” (C 1004A) and 15” (C 1008A) models, allowing the speakers to be side mounted when used in foldback applications. 4 inbuilt rigging points allow the units to be suspended using eye bolts.

The horn flare is moulded as part of the cabinet and fitted with a titanium diaphragm compression driver. The main bass speakers are manufactured with rugged heavy duty diecast aluminium frames.

Connections are made with industry standard 4 pole speaker connectors ie: one for in and one for out. Boasting excellent frequency characteristics, these speakers are the perfect choice for both hire and installation companies.

Features:

Rugged moulded ABS construction Cast aluminium frame bass driver High performance large voicecoil diameter Wide frequency response Titanium diaphragm compression driver

Specifications:

Rating: 200W (RMS) Impedance: 8 Ohm SPL (1W @ 1m): 95.5dB Frequency Resp: 40Hz - 20kHz Dimensions: 430 x 310 x 580mm Weight: 17.5kg

A high powered active speakers series identical in performance and construction to the unpowered units, each include a self-contained power amplifier. Simply connect 240VAC power and an input source such as a CD player, tape deck or microphone and you have a crystal clear, high powered PA system! Accept either XLR balanced or 6.35mm unbalanced mic input, and XLR or RCA line level input. Each unit also have XLR and 6.35mm line out connectors, allowing multiple powered speakers to be ‘daisy chained’ from a single input source. Using two of these units connected together to one microphone, you could easily address a crowd of 1000 people! The power amp has separate volume controls for mic input, line input and master output, plus bass and treble controls.

Features

• Rugged moulded ABS construction • Cast aluminium frame bass driver with large voice coil diameter • Inbuilt top hat mount and carry handle • Wide frequency response • Titanium diaphragm compression driver • 4 rigging points

Specifications

Power: 180W RMS Impedance: 8Ω SPL (1W @ 1m): 96.5dB Frequency Response: 50Hz - 17kHz Rigging Threads: M8 Dimensions: 335 x 260 x 472mm Weight: approx 15kg

Black powdercoated steel bracket specifically designed to suit the C1000 club speaker. Comes included with the required hardware to mount the speaker to the bracket.

Note: speaker not included.

Housed in rugged wedge shaped nylon fibre and ABS moulded cabinets these speakers are designed with portability in mind. The cabinets include an inbuilt carry handle and are easily transported. Whilst they are lightweight, they offer extreme durability and strength.

Provision has been made to allow the speakers to be stacked on top of each other and an inbuilt top hat allows stand mounting.

The horn flare is moulded as part of the cabinet and fitted with a titanium diaphragm compression driver. The main bass speakers are manufactured with rugged heavy duty diecast aluminium frames.

Connections are made with industry standard 4 pole speaker connectors ie: one for in and one for out. Boasting excellent frequency characteristics, these speakers are the perfect choice for both hire and installation companies.

4 inbuilt rigging points allow the unit to be suspended using eye bolts.

Features:

Rugged moulded ABS construction Cast aluminium frame bass driver with large voice coil diameter Inbuilt top hat mount and carry handle Wide frequency response Titanium diaphragm compression driver 4 rigging points

Specifications:

Rating: 150W (RMS) Impedance: 8 Ohm SPL (1W @ 1m): 96.5dB Frequency Resp: 50Hz - 17kHz Dimensions: 335 x 260 x 472mm Weight: 12kg

Wall mount bracket for C0996
*Note speaker not included.

Housed in rugged wedge shaped nylon fibre and ABS moulded cabinets these speakers are designed with portability in mind. The cabinets include an inbuilt carry handle and are easily transported. Whilst they are lightweight, they offer extreme durability and strength.

Provision has been made to allow the speakers to be stacked on top of each other and an inbuilt top hat allows stand mounting.

The horn flare is moulded as part of the cabinet and fitted with a titanium diaphragm compression driver. The main bass speakers are manufactured with rugged heavy duty diecast aluminium frames.

Connections are made with industry standard 4 pole speaker connectors ie: one for in and one for out. Boasting excellent frequency characteristics, these speakers are the perfect choice for both hire and installation companies.

4 inbuilt rigging points allow the unit to be suspended using eye bolts.

Features:

Rugged moulded ABS construction Cast aluminium frame bass driver with large voice coil diameter Inbuilt top hat mount and carry handle Wide frequency response Titanium diaphragm compression driver 4 rigging points

Specifications:

Rating: 80W (RMS) Impedance: 8Ω SPL (1W @ 1m): 89dB Frequency Resp: 50Hz - 17kHz Dimensions: 282 x 213 x 393mm Weight: 12kg

With a wide frequency response, high power handling and high efficiency, these rugged two way
speakers are designed for the rigours of PA hire or band use. They are the perfect partner for the C 1049 18” active subwoofer unit and are equally at home when used as full-range speakers. The wedgeshaped design minimises internal acoustic reflections. Fitted with carry handles, standard 4 pin speaker socket & top hat for stand mounting.

Specifications:

Input power: 300W RMS Impedance: 8Ω Freq response: 80Hz-18kHz SPL: 97dB 1W@1m, 122dB Max Dimensions: 510H x 310W x 320D Weight: 15.5kg

A high power two-way 8” speaker system superb for foreground music applications eg as music fill in pubs or bars. The sound reproduction is loud, clear and punchy. The stylish cabinet is both aesthetically pleasing and physically robust. May be permanently wallmounted or installed on a speaker stand via theinbuilt top hat. Fitted with standard 4 pin speaker socket.

Specifications:

Input power (continuous): 150W RMS Impedance: 4Ω Freq response: 100Hz-18kHz SPL 1W @ 1m: 97dB Max SPL: 119dB Dimensions: 420H x 272W x 250D Weight: 7.5kg

This series of Biema 2-way full range speakers has been engineered using the most advanced
acoustic design software. The trapezoid shaped plywood cabinets have been specially treated
with an acoustic damping coating to improve their performance. Each completed unit is subject to a 5 hour “running in” test. The cabinets’ trapezoidal cross section allows installation in either wall or ceiling mount applications. Fitted with standard 4 pin speaker socket & top hat for stand mounting.

Specifications:

Input power (continuous): 150W RMS Input power (peak): 300W Impedance: 4Ω Freq response: 60Hz-20kHz SPL 1W @ 1m: 93dB Max SPL: 118dB Dimensions: 695H x 275W x 280D Weight: 13.5kg

This series of Biema 2-way full range speakers has been engineered using the most advanced
acoustic design software. The trapezoid shaped plywood cabinets have been specially treated
with an acoustic damping coating to improve their performance. Each completed unit is subject to a 5 hour “running in” test. The cabinets’ trapezoidal cross section allows installation in either wall or ceiling mount applications. Fitted with standard 4 pin speaker socket & top hat for stand mounting.

Specifications:

Input power (continuous): 150W RMS Input power (peak): 300W Impedance: 4Ω Freq response: 60Hz-20kHz SPL 1W @ 1m: 93dB Max SPL: 118dB Dimensions: 695H x 275W x 280D Weight: 13.5kg

This series of Biema 2-way full range speakers has been engineered using the most advanced
acoustic design software. The trapezoid shaped plywood cabinets have been specially treated
with an acoustic damping coating to improve their performance. Each completed unit is subject to a 5 hour “running in” test. The cabinets’ trapezoidal cross section allows installation in either wall or ceiling mount applications. Fitted with standard 4 pin speaker socket & top hat for stand mounting.

Specifications:

Input power (continuous): 120W RMS Input power (peak): 240W Impedance: 4Ω Freq response: 70Hz-20kHz SPL 1W @ 1m: 93dB Max SPL: 117dB Dimensions: 620H x 220W x 222D Weight: 9.9kg

Contemporary modern styling coupled with high power handling make these Redback speakers an excellent choice for any foreground music application. The 2-way ported design offers outstanding music reproduction. They employ two high power 4” mid-bass drivers with a 20mm titanium dome tweeter. They are supplied with a robust diecast mounting bracket which enables the speaker to be mounted either vertically or horizontally. In-built spring terminals provide easy cable termination. Ideal for bars, clubs, pubs, sports clubs etc. Also well suited to domestic use in entertainment areas, games rooms and the like. Sold in pairs.

Specifications

Rated power: 75W continuous (150W max) Impedance:8 Ohm SPL 1W @ 1m: 89dB Freq. response: 65Hz- 20kHz Dimensions (W x L x D): 310 x 175 x 216mm Weight:3.5kg each

Features

• Easy to install, quick adjust swivel bracket • Outstanding sound reproduction • Great for bars, cafes, pubs, boutiques, galleries etc • Modern contemporary design • High power handling • Extended frequency response

Powered by an internal amplifier, this 15” active subwoofer provides deep sub bass for PA speaker systems. The heavy duty bass reflex cabinet makes it perfect for band PAs or DJs. Equally at home in fixed or mobile PA systems.

Features adjustable output level and low-pass filter point.

Specifications:

Output power: 360W RMS, 800W Max Impedance: 4Ω Freq response: 35Hz-500Hz Low pass adjustment: 50-500Hz SPL: 99dB 1W@1m, 127dB Max Dimensions: 670H x 445W x 365D Weight: 29kg

Manufactured from tough polypropylene, these compact full range speakers are designed for use in a multitude of venues. They offer excellent performance in high fidelity, high power, foreground music applications. Engineered using sophisticated acoustic design software, they are fitted with a
unique mounting bracket, making installation a breeze.

Specifications:

Input power (continuous): 35W RMS Impedance: 8Ω Freq response: 80Hz-18kHz SPL 1W @ 1m: 86dB Max SPL: 104dB Dimensions: 285H x168W x 155D Weight: 3.6kg

Manufactured from tough polypropylene, these compact full range speakers are designed for use in a multitude of venues. They offer excellent performance in high fidelity, high power, foreground music applications. Engineered using sophisticated acoustic design software, they are fitted with a unique mounting bracket, making installation a breeze.

Specifications:

Input power (continuous): 35W RMS Impedance: 8Ω Freq response: 80Hz-18kHz SPL 1W @ 1m: 86dB Max SPL: 104dB Dimensions: 285H x168W x 155D Weight: 3.6kg

High performance speech and music speakers for commercial sound applications

Redback sound columns are constructed from a unique proprietary aluminium extrusion. UV stabilised Luran 'S' end caps are fitted. Speaker drivers are secured to a marine grade ply baffle board. The overall design and construction criteria ensure good looks and long service life in harsh outdoor applications including direct sunlight. Included are aluminium mounting brackets and stainless steel fixings. The brackets enable both horizontal and vertical adjustments. 40W and 60W models available in either white or black

The drivers have been chosen for wide range, low distortion, mid range “presence” (essential for high grade vocal work) and high efficiency in general. Acoustic wadding is used to dampen Bass resonance. The directional characteristics of Redback sound column speakers eminently suit them to indoor applications such as Halls, Shopping Centres, Air Terminals, Churches, Gymnasiums, Squash Courts and 1000 and 1 other applications. Sound columns are especially helpful in overcoming reverberation echo and microphone “feed back” or whistle. When mounted vertically the REDBACK sound columns can be “focused” to provide an even sound pressure level from front to rear of audience.

Features:

Rugged extruded aluminium construction Superb black or white industrial grade powder coat paint finish Engineer designed in Australia Excellent reproduction Superior to imports - yet a fraction of the price All exterior fixings marine grade stainless steel Speaker cones treated with special formula to repel moisture

Specifications:

Type: 100V line Power taps: 10, 20, 30, 60W Dimensions: 770H x 150W x 155D mm Colour: Black

Connection Details:

Supplied with multi-core cable connected to the various power taps of the transformer. Simply connect between common and the required power tap. Output cable allows connection to 10, 20, 30 or 60W power taps. Supplied with Two Mounting Brackets Enabling Adjustment Both Vertically and Horizontally

High performance speech and music speakers for commercial sound applications

Redback sound columns are constructed from a unique proprietary aluminium extrusion. UV stabilised Luran 'S' end caps are fitted. Speaker drivers are secured to a marine grade ply baffle board. The overall design and construction criteria ensure good looks and long service life in harsh outdoor applications including direct sunlight. Included are aluminium mounting brackets and stainless steel fixings. The brackets enable both horizontal and vertical adjustments. 40W and 60W models available in either white or black

The drivers have been chosen for wide range, low distortion, mid range “presence” (essential for high grade vocal work) and high efficiency in general. Acoustic wadding is used to dampen Bass resonance. The directional characteristics of Redback sound column speakers eminently suit them to indoor applications such as Halls, Shopping Centres, Air Terminals, Churches, Gymnasiums, Squash Courts and 1000 and 1 other applications. Sound columns are especially helpful in overcoming reverberation echo and microphone “feed back” or whistle. When mounted vertically the REDBACK sound columns can be “focused” to provide an even sound pressure level from front to rear of audience.

Features:

Rugged extruded aluminium construction Superb black or white industrial grade powder coat paint finish Engineer designed in Australia Excellent reproduction Superior to imports - yet a fraction of the price All exterior fixings marine grade stainless steel Speaker cones treated with special formula to repel moisture

Specifications:

Type: 100V line Power taps: 10, 20, 30, 60W Dimensions: 770H x 150W x 155D mm Colour: White

Connection Details:

Supplied with multi-core cable connected to the various power taps of the transformer. Simply connect between common and the required power tap. Output cable allows connection to 10, 20, 30 or 60W power taps. Supplied with Two Mounting Brackets Enabling Adjustment Both Vertically and Horizontally

High performance speech and music speakers for commercial sound applications

Redback sound columns are constructed from a unique proprietary aluminium extrusion. UV stabilised Luran 'S' end caps are fitted. Speaker drivers are secured to a marine grade ply baffle board. The overall design and construction criteria ensure good looks and long service life in harsh outdoor applications including direct sunlight. Mounting bracket included. The brackets enable both horizontal and vertical adjustments. 40W and 60W models available in either white or black

The drivers have been chosen for wide range, low distortion, mid range “presence” (essential for high grade vocal work) and high efficiency in general. Acoustic wadding is used to dampen Bass resonance. The directional characteristics of Redback sound column speakers eminently suit them to indoor applications such as Halls, Shopping Centres, Air Terminals, Churches, Gymnasiums, Squash Courts and more. Sound columns are especially helpful in overcoming reverberation echo and microphone “feed back” or whistle. When mounted vertically the REDBACK sound columns can be “focused” to provide an even sound pressure level from front to rear of audience.

Features:

Rugged extruded aluminium construction Superb black or white industrial grade powder coat paint finish Engineer designed in Australia Excellent reproduction Superior to imports - yet a fraction of the price All exterior fixings marine grade stainless steel Speaker cones treated with special formula to repel moisture

Specifications:

Type: 100V line Power taps: 5, 10, 20, 40W Dimensions: 550 x 150 x 155mm Colour: Black

Connection Details:

Supplied with multi-core cable connected to the various power taps of the transformer. Simply connect between common and the required power tap. Output cable allows connection to 5, 10, 20 or 40W power taps. Supplied with mounting bracket.

High performance speech and music speakers for commercial sound applications

Redback sound columns are constructed from a unique proprietary aluminium extrusion. UV stabilised Luran 'S' end caps are fitted. Speaker drivers are secured to a marine grade ply baffle board. The overall design and construction criteria ensure good looks and long service life in harsh outdoor applications including direct sunlight. Mounting bracket included. The brackets enable both horizontal and vertical adjustments. 40W and 60W models available in either white or black

The drivers have been chosen for wide range, low distortion, mid range “presence” (essential for high grade vocal work) and high efficiency in general. Acoustic wadding is used to dampen Bass resonance. The directional characteristics of Redback sound column speakers eminently suit them to indoor applications such as Halls, Shopping Centres, Air Terminals, Churches, Gymnasiums, Squash Courts and more. Sound columns are especially helpful in overcoming reverberation echo and microphone “feed back” or whistle. When mounted vertically the REDBACK sound columns can be “focused” to provide an even sound pressure level from front to rear of audience.

Features

Rugged extruded aluminium construction Superb black or white industrial grade powder coat paint finish Engineer designed in Australia Excellent reproduction Superior to imports - yet a fraction of the price All exterior fixings marine grade stainless steel Speaker cones treated with special formula to repel moisture

Specifications

Type: 100V line Power taps: 5, 10, 20, 40W Dimensions: 550 x 150 x 155mm Colour: White

Connection Details

Supplied with multi-core cable connected to the various power taps of the transformer. Simply connect between common and the required power tap. Output cable allows connection to 5, 10, 20 or 40W power taps. Supplied with Mounting Bracket

Great for bars, lecture theatres, boardrooms, cafes, function areas, pubs, boutiques etc. System comprises of one active speaker with inbuilt stereo amplifier and one passive speaker which is powered from the active speaker.

These high power music speakers feature exceptional sound quality for professional sound reinforcement. Available with 165mm or 200mm bass drivers they feature a stylish contoured profile and quick mounting bracket which virtually disappears once mounted. An in-built amplifier allows easy integration into existing systems with only line level signal required for operation. The ported bass reflex enclosure produces outstanding sound reproduction ideal for areas requiring high quality sound reinforcement. Rear mounted
volume, bass and treble controls allow easy adjustment, even after installation. RCA’s provide easy connection to existing audio sources. Mains power for the amplifier is connected via IEC socket on the rear panel. Each speaker can be switched off when not in use.

Features:

• Aluminium grill and bracket • In-built amplifier for easy integration • Easy to install, quick adjust bracket • Outstanding sound reproduction • Great for bars, cafes, pubs, boutiques etc

Specifications:

Rated power: 80W Max SPL 1W @ 1m: 89dB Freq response: 60Hz-20kHz Dimensions (mm): 270W x 358L x 370D Weight passive: 6.5kg Weight active: 8kg

Connection Diagram:

Great for bars, lecture theatres, boardrooms, cafes, function areas, pubs, boutiques etc. System comprises of one active speaker with inbuilt stereo amplifier and one passive speaker which is powered from the active speaker.

These high power music speakers feature exceptional sound quality for professional sound reinforcement. Available with 165mm or 200mm bass drivers they feature a stylish contoured profile and quick mounting bracket which virtually disappears once mounted. An in-built amplifier allows easy integration into existing systems with only line level signal required for operation. The ported bass reflex enclosure produces outstanding sound reproduction ideal for areas requiring high quality sound reinforcement. Rear mounted
volume, bass and treble controls allow easy adjustment, even after installation. RCA’s provide easy connection to existing audio sources. Mains power for the amplifier is connected via IEC socket on the rear panel. Each speaker can be switched off when not in use.

Features:

• Aluminium grill and bracket • In-built amplifier for easy integration • Easy to install, quick adjust bracket • Outstanding sound reproduction • Great for bars, cafes, pubs, boutiques etc

Specifications:

Rated power: 80W Max SPL 1W @ 1m: 89dB Freq response: 60Hz-20kHz Dimensions (mm): 270W x 358L x 370D Weight passive: 6.5kg Weight active: 8kg

Connection Diagram:

Great for bars, lecture theatres, boardrooms, cafes, function areas, pubs, boutiques etc. System comprises of one active speaker with inbuilt stereo amplifier and one passive speaker which is powered from the active speaker.

These high power music speakers feature exceptional sound quality for professional sound reinforcement. Available with 165mm or 200mm bass drivers they feature a stylish contoured profile and quick mounting bracket which virtually disappears once mounted. An in-built amplifier allows easy integration into existing systems with only line level signal required for operation. The ported bass reflex enclosure produces outstanding sound reproduction ideal for areas requiring high quality sound reinforcement. Rear mounted
volume, bass and treble controls allow easy adjustment, even after installation. RCA’s provide easy connection to existing audio sources. Mains power for the amplifier is connected via IEC socket on the rear panel. Each speaker can be switched off when not in use.

Features:

Aluminium grill and bracket In-built amplifier for easy integration Easy to install, quick adjust bracket Outstanding sound reproduction Great for bars, cafes, pubs, boutiques etc.

Specifications:

Rated power: 50W Max SPL 1W @ 1m: 85dB Freq. response: 70Hz- 20kHz Dimensions (mm): 215W x 288L x 242D Weight: Passive: 4kg Active: 5kg

Connection Diagram:

Great for bars, lecture theatres, boardrooms, cafes, function areas, pubs, boutiques etc. System comprises of one active speaker with inbuilt stereo amplifier and one passive speaker which is powered from the active speaker.

These high power music speakers feature exceptional sound quality for professional sound reinforcement. Available with 165mm or 200mm bass drivers they feature a stylish contoured profile and quick mounting bracket which virtually disappears once mounted. An in-built amplifier allows easy integration into existing systems with only line level signal required for operation. The ported bass reflex enclosure produces outstanding sound reproduction ideal for areas requiring high quality sound reinforcement. Rear mounted
volume, bass and treble controls allow easy adjustment, even after installation. RCA’s provide easy connection to existing audio sources. Mains power for the amplifier is connected via IEC socket on the rear panel. Each speaker can be switched off when not in use.

Features:

Aluminium grill and bracket In-built amplifier for easy integration Easy to install, quick adjust bracket Outstanding sound reproduction Great for bars, cafes, pubs, boutiques etc.

Specifications:

Rated power: 50W Max SPL 1W @ 1m: 85dB Freq. response: 70Hz- 20kHz Dimensions (mm): 215W x 288L x 242D Weight: Passive: 4kg Active: 5kg

Connection Diagram:

These high power music speakers feature exceptional sound quality for professional sound reinforcement. They offer a stylish contoured profile together with a quick mounting bracket that virtually disappears once mounted. Connection is via the recessed inbuilt gold plated banana sockets. The 100V line models provide multiple power taps and 8 ohm settings, easily selected via the inbuilt rotary switch. Dedicated 8Ω versions are also available in 30W, 45W and 85W models. All are IP54 rated. Engineered for both home audio and commercial sound reinforcement applications. For home use select an 8 ohm model, for commercial use 100V line is generally employed. All models sold in pairs.

Entertainer series:
2-way sealed enclosure speaker system with 6.5" bass driver and mylar dome tweeter. 100V line models include 50W 100V line transformer with multiple power tappings, plus an 8Ω setting rated at 50W.

Specifications:

Power: 50W Power Taps: 7.5, 15, 25, 35, 50W SPL 1W @ 1m: 88dB Freq. Response: 65Hz-20kHz Dimensions (WxDxH): 215 x 202 x 288 Weight: 4.5kg

These high power music speakers feature exceptional sound quality for professional sound reinforcement. They offer a stylish contoured profile together with a quick mounting bracket that virtually disappears once mounted. Connection is via the recessed inbuilt gold plated banana sockets. The 100V line models provide multiple power taps and 8 ohm settings, easily selected via the inbuilt rotary switch. Dedicated 8Ω versions are also available in 30W, 45W and 85W models. All are IP54 rated. Engineered for both home audio and commercial sound reinforcement applications. For home use select an 8 ohm model, for commercial use 100V line is generally employed. All models sold in pairs.

Entertainer series:
2-way sealed enclosure speaker system with 6.5" bass driver and mylar dome tweeter. 100V line models include 50W 100V line transformer with multiple power tappings, plus an 8Ω setting rated at 50W.

Specifications:

Power: 50W Power Taps: 7.5, 15, 25, 35, 50W SPL 1W @ 1m: 88dB Freq. Response: 65Hz-20kHz Dimensions (WxDxH): 215 x 202 x 288 Weight: 4.5kg

These high power music speakers feature exceptional sound quality for professional sound reinforcement. They offer a stylish contoured profile together with a quick mounting bracket that virtually disappears once mounted. Connection is via the recessed inbuilt gold plated banana sockets. The 100V line models provide multiple power taps and 8 ohm settings, easily selected via the inbuilt rotary switch. Dedicated 8Ω versions are also available in 30W, 45W and 85W models. All are IP54 rated. Engineered for both home audio and commercial sound reinforcement applications. For home use select an 8 ohm model, for commercial use 100V line is generally employed. All models sold in pairs.

Entertainer series:
2-way sealed enclosure speaker system with 6.5" bass driver and mylar dome tweeter. 100V line models include 50W 100V line transformer with multiple power tappings, plus an 8Ω setting rated at 50W.

Power:50W
Power Taps: -
SPL 1W @ 1m: 88dB
Freq. Response: 65Hz-20Hz
Dimensions (WxDxH): 215 x 202 x 288
Weight: 3.8kg

These high power music speakers feature exceptional sound quality for professional sound reinforcement. They offer a stylish contoured profile together with a quick mounting bracket that virtually disappears once mounted. Connection is via the recessed inbuilt gold plated banana sockets. The 100V line models provide multiple power taps and 8 ohm settings, easily selected via the inbuilt rotary switch. Dedicated 8Ω versions are also available in 30W, 45W and 85W models. All are IP54 rated. Engineered for both home audio and commercial sound reinforcement applications. For home use select an 8 ohm model, for commercial use 100V line is generally employed. All models sold in pairs.

Entertainer series:
2-way sealed enclosure speaker system with 6.5" bass driver and mylar dome tweeter. 100V line models include 50W 100V line transformer with multiple power tappings, plus an 8Ω setting rated at 50W.

Power:50W
Power Taps: -
SPL 1W @ 1m: 88dB
Freq. Response: 65Hz-20Hz
Dimensions (WxDxH): 215 x 202 x 288
Weight: 3.8kg

These high power Redback® Studio Series music speakers feature exceptional sound quality for professional sound reinforcement. They offer a stylish contoured profile together with a quick mounting bracket that virtually disappears once mounted. Connection is via the inbuilt gold plated banana sockets. Includes 45W 100V line transformer with multiple power tappings, taps are adjusted via the inbuilt rotary switch. Also features an 8Ω setting rated at 85W.

85W 2-way bass reflex speaker system with 8" bass driver and mylar dome tweeter. Best suited to foreground music systems and PA music extension speakers in commercial applications.

Fantastic for pubs, hotels, clubs, DJs, churches, bands, schools, theatres, sound rooms, etc.

Specifications:

Power: 85W (8Ω), 45W (100V) Power Taps: 8Ω, 3W, 10W, 25W, 45W SPL (1W @ 1m): 88dB Freq. Response: 39Hz - 20kHz Dimensions: 270W x 210D x 335H Weight: 7kg/ speaker

Rear View of Unit

These high power music speakers feature exceptional sound quality for professional sound reinforcement. They offer a stylish contoured profile together with a quick mounting bracket that virtually disappears once
mounted. Connection is via the recessed inbuilt gold plated banana sockets. The 100V line models provide multiple power taps and 8 ohm settings, easily selected via the inbuilt rotary switch. Dedicated 8Ω versions are also available in 30W, 45W and 85W models. All are IP41 rated. Engineered for both home audio and commercial sound reinforcement applications. For home use select an 8 ohm model, for commercial use 100V line is generally employed. All models sold in pairs.
Studio series:
Fantastic for pubs, hotels, clubs, churches, bands, schools, theatres and sound rooms. 2-way bass reflex speaker system with 8” bass driver and silk dome tweeter. 100V line models include 50W line transformer with multiple power taps, plus an 8Ω setting rated at 85W.

Specifications:

Power: 50W Power Taps: 7.5, 15, 25, 35, 50W SPL 1W @ 1m: 88dB Freq. Response: 39Hz-20kHz Dimensions (WxDxH): 270 x 210 x 335 Weight: ≈7kg

These high power Redback® Studio Series music speakers feature exceptional sound quality for professional sound reinforcement. They offer a stylish contoured profile together with a quick mounting bracket that virtually disappears once mounted. Connection is via the inbuilt gold plated banana sockets.

85W 2-way bass reflex speaker system with 8" bass driver and mylar dome tweeter. Best suited to foreground music systems and PA music extension speakers in commercial applications.

Fantastic for pubs, hotels, clubs, DJs, churches, bands, schools, theatres, sound rooms, etc

Specifications

Power Rating: 85W, 8Ω SPL (1W @ 1m): 88dB Freq. Response: 39Hz - 20kHz Dimensions: 270W x 210D x 335H Weight: 6kg/ speaker

Rear View

These high power Redback® Studio Series music speakers feature exceptional sound quality for professional sound reinforcement. They offer a stylish contoured profile together with a quick mounting bracket that virtually disappears once mounted. Connection is via the inbuilt gold plated banana sockets.

85W 2-way bass reflex speaker system with 8" bass driver and mylar dome tweeter. Best suited to foreground music systems and PA music extension speakers in commercial applications.

Fantastic for pubs, hotels, clubs, DJs, churches, bands, schools, theatres, sound rooms, etc

Specifications

Power Rating: 85W, 8Ω SPL (1W @ 1m): 88dB Freq. Response: 39Hz - 20kHz Dimensions: 270W x 210D x 335H Weight: 6kg/ speaker

Rear View

These high power Redback® Monitor Series music speakers feature exceptional sound quality for professional sound reinforcement. They offer a stylish contoured profile together with a quick mounting bracket that virtually disappears once mounted. Connection is via the inbuilt gold plated banana sockets. Includes 45W 100V line transformer with multiple power tappings, taps are adjusted via the inbuilt rotary switch. Also features an 8Ω setting rated at 45W.

45W sealed speaker with 5.25" bass driver and mylar dome tweeter. Best suited to foreground music systems and PA music extension speakers in commercial applications

Fantastic for pubs, hotels, clubs, DJs, churches, bands, schools, theatres, sound rooms, etc.

Specifications:

Power: 45W Power Taps: 8Ω, 3W, 10W, 25W, 45W SPL (1W @ 1m): 88dB Freq. Response: 61Hz - 20kHz Dimensions: 180W x 150D x 238H Weight: 3.5kg/ speaker

These high power Redback® Monitor Series music speakers feature exceptional sound quality for professional sound reinforcement. They offer a stylish contoured profile together with a quick mounting bracket that virtually disappears once mounted. Connection is via the inbuilt gold plated banana sockets. Includes 45W 100V line transformer with multiple power tappings, taps are adjusted via the inbuilt rotary switch. Also features an 8Ω setting rated at 45W.

45W sealed speaker with 5.25" bass driver and mylar dome tweeter. Best suited to foreground music systems and PA music extension speakers in commercial applications

Fantastic for pubs, hotels, clubs, DJs, churches, bands, schools, theatres, sound rooms, etc.

Specifications:

Power: 45W Power Taps: 8Ω, 3W, 10W, 25W, 45W SPL (1W @ 1m): 88dB Freq. Response: 61Hz - 20kHz Dimensions: 180W x 150D x 238H Weight: 3.5kg/ speaker

These high power Redback® Monitor Series music speakers feature exceptional sound quality for professional sound reinforcement. They offer a stylish contoured profile together with a quick mounting bracket that virtually disappears once mounted. Connection is via the inbuilt gold plated banana sockets.

45W sealed speaker with 5.25" bass driver and mylar dome tweeter. Best suited to foreground music systems and PA music extension speakers in commercial applications.

Fantastic for pubs, hotels, clubs, DJs, churches, bands, schools, theatres, sound rooms, etc

Specifications:

Power Rating: 45W, 8Ω SPL (1W @ 1m): 88dB Freq. Response: 61Hz - 20kHz Dimensions: 180W x 150D x 238H Weight: 2.5kg/ speaker

These high power Redback® Monitor Series music speakers feature exceptional sound quality for professional sound reinforcement. They offer a stylish contoured profile together with a quick mounting bracket that virtually disappears once mounted. Connection is via the inbuilt gold plated banana sockets.

45W sealed speaker with 5.25" bass driver and mylar dome tweeter. Best suited to foreground music systems and PA music extension speakers in commercial applications.

Fantastic for pubs, hotels, clubs, DJs, churches, bands, schools, theatres, sound rooms, etc

Specifications:

Power Rating: 45W, 8Ω SPL (1W @ 1m): 88dB Freq. Response: 61Hz - 20kHz Dimensions: 180W x 150D x 238H Weight: 2.5kg/ speaker

High Performance Speech and Music Speakers for Home Stereo and Commercial Sound Applications

The REDBACK® Sound Monitors are constructed from moulded 'Luran-S' thermoplastic. They feature a two way, bass reflex speaker system with a 100mm bass/midrange driver and a polymide dome tweeter with a custom designed crossover network. They produce a punchy, powerful sound making them ideal for BGM/paging applications in hotels, taverns, shopping centres, halls, schools, and fairgrounds. Included is the revolutionary Wacki bracket mounting system, allowing a wide variation in mounting angles. They are available in either 8 Ohm or 100V line format in white or black.
Includes Wacki® Bracket Mounting System

Suitable for - Home stereo extension speakers for pool, patio, games room etc, taverns, hotels, shopping centres, schools, halls, fairgrounds and all external music and paging applications.

Fitted with a 100V line transformer, allowing the speaker to be tapped at 30, 20, 10 and 5 Watts. Includes Wacki® Bracket Mounting System

MADE IN AUSTRALIA

Features

• Weather resistant • Rugged fully molded high impact UV stabilised ‘Luran S’ thermoplastic • Available in black or white • Engineer designed in Australia • Ported and tuned enclosure for enhanced bass response • High efficiency, SPL 91dB 30 watt models (1w RMS at 1m at 1kHz) • Frequency Response 90Hz to 18kHz • Includes PTC Fuse overload protection • Supplied complete with Wacki mounting bracket

Specifications:

Power taps: 5, 10, 20, 30W Frequency Response: 90Hz - 18kHz SPL (1W @ 1m): 91dB Dimensions: 230H x 155W x 115D mm Colour: Black

Includes unique Wacki Bracket.

High Performance Speech and Music Speakers for Home Stereo and Commercial Sound Applications

The REDBACK® Sound Monitors are constructed from moulded 'Luran-S' thermoplastic. They feature a two way, bass reflex speaker system with a 100mm bass/midrange driver and a polymide dome tweeter with a custom designed crossover network. They produce a punchy, powerful sound making them ideal for BGM/paging applications in hotels, taverns, shopping centres, halls, schools, and fairgrounds. Included is the revolutionary Wacki bracket mounting system, allowing a wide variation in mounting angles. They are available in either 8 Ohm or 100V line format in white or black.
Includes Wacki® Bracket Mounting System

Suitable for - Home stereo extension speakers for pool, patio, games room etc, taverns, hotels, shopping centres, schools, halls, fairgrounds and all external music and paging applications.

Fitted with a 100V line transformer, allowing the speaker to be tapped at 30, 20, 10 and 5 Watts. Includes Wacki® Bracket Mounting System

MADE IN AUSTRALIA

Features:

100V line operation with 30, 20, 10 and 5 watt taps Weather resistant Rugged fully molded high impact UV stabilised ‘Luran S’ thermoplastic Available in black or white Engineer designed in Australia Ported and tuned enclosure for enhanced bass response High efficiency, SPL 91dB 30 watt models (1w RMS at 1m at 1kHz) Includes PTC Fuse overload protection Supplied complete with Wacki mounting bracket

Specifications:

Power taps: 5, 10, 20, 30W Frequency Response: 90Hz - 18kHz SPL (1W @ 1m): 91dB Dimensions: 230H x 155W x 115D mm Colour: White

Includes the unique Wacki Bracket.

High Performance Speech and Music Speakers for Home Stereo and Commercial Sound Applications

The REDBACK® Sound Monitors are constructed from moulded 'Luran-S' thermoplastic. They feature a two way, bass reflex speaker system with a 100mm bass/midrange driver and a polymide dome tweeter with a custom designed crossover network. They produce a punchy, powerful sound making them ideal for BGM/paging applications in hotels, taverns, shopping centres, halls, schools, and fairgrounds. Included is the revolutionary Wacki bracket mounting system, allowing a wide variation in mounting angles. They are available in either 8 Ohm or 100V line format in white or black.
Includes Wacki® Bracket Mounting System

Suitable for - Home stereo extension speakers for pool, patio, games room etc, taverns, hotels, shopping centres, schools, halls, fairgrounds and all external music and paging applications.

MADE IN AUSTRALIA

Features

• Weather resistant • Rugged fully molded high impact UV stabilised ‘Luran S’ thermoplastic • Available in black or white • Engineer designed in Australia • Ported and tuned enclosure for enhanced bass response • High efficiency, SPL 91dB 30 watt models (1w RMS at 1m at 1kHz) • Frequency Response 90Hz to 18kHz • Includes PTC Fuse overload protection • Supplied complete with Wacki mounting bracket

Specifications:

Power rating: 30W Frequency Response: 90Hz - 18kHz SPL (1W @ 1m): 91dB Dimensions: 230H x 155W x 115D mm Colour: Black

Includes the unique Wacki Bracket

High Performance Speech and Music Speakers for Home Stereo and Commercial Sound Applications

The REDBACK® Sound Monitors are constructed from moulded 'Luran-S' thermoplastic. They feature a two way, bass reflex speaker system with a 100mm bass/midrange driver and a polymide dome tweeter with a custom designed crossover network. They produce a punchy, powerful sound making them ideal for BGM/paging applications in hotels, taverns, shopping centres, halls, schools, and fairgrounds. Included is the revolutionary Wacki bracket mounting system, allowing a wide variation in mounting angles. They are available in either 8 Ohm or 100V line format in white or black.
Includes Wacki® Bracket Mounting System

Suitable for - Home stereo extension speakers for pool, patio, games room etc, taverns, hotels, shopping centres, schools, halls, fairgrounds and all external music and paging applications.

MADE IN AUSTRALIA

Features:

Weather resistant Rugged fully molded high impact UV stabilised ‘Luran S’ thermoplastic Available in black or white Engineer designed in Australia Ported and tuned enclosure for enhanced bass response High efficiency, SPL 91dB 30 watt models (1w RMS at 1m at 1kHz) Frequency Response 90Hz to 18kHz Includes PTC Fuse overload protection Supplied complete with Wacki mounting bracket

Specifications:

Power rating: 30W Frequency Response: 90Hz - 18kHz SPL (1W @ 1m): 91dB Dimensions: 230H x 155W x 115D mm Colour: White

Includes the unique Wacki bracket

These high power Redback® Monitor Series music speakers feature exceptional sound quality for professional sound reinforcement. They offer a stylish contoured profile together with a quick mounting bracket that virtually disappears once mounted. Connection is via the inbuilt gold plated banana sockets.

45W sealed speaker with 5.25" bass driver and mylar dome tweeter. Best suited to foreground music systems and PA music extension speakers in commercial applications.

Fantastic for pubs, hotels, clubs, DJs, churches, bands, schools, theatres, sound rooms, etc

Specifications:

Power Rating: 45W, 8Ω SPL (1W @ 1m): 88dB Freq. Response: 61Hz - 20kHz Dimensions: 180W x 150D x 238H Weight: 2.5kg/ speaker

These high power Redback® Bookshelf Series music speakers feature exceptional sound quality for professional sound reinforcement. They offer a stylish contoured profile together with a quick mounting bracket that virtually disappears once mounted. Connection is via the inbuilt gold plated banana sockets. Includes 20W 100V line transformer with multiple power tappings, taps are adjusted via the inbuilt rotary switch. Also features an 8Ω setting rated at 30W.

30W sealed speaker with 3.5" bass driver and mylar dome tweeter. Brilliant for background music systems or extension speakers.

Fantastic for pubs, hotels, clubs, DJs, churches, bands, schools, theatres, sound rooms, etc.

Specifications:

Power: 30W (8Ω), 20W (100V) Power Taps: 8 Ω, 2.5W, 5W, 10W, 20W SPL (1W @ 1m): 87dB Freq. Response: 82Hz - 20kHz Dimensions: 130W x 105D x 170H Weight: 2.2kg/ speaker

These high power Redback® Bookshelf Series music speakers feature exceptional sound quality for professional sound reinforcement. They offer a stylish contoured profile together with a quick mounting bracket that virtually disappears once mounted. Connection is via the inbuilt gold plated banana sockets.

30W sealed speaker with 3.5" bass driver and mylar dome tweeter. Brilliant for background music systems or extension speakers.

Fantastic for pubs, hotels, clubs, DJs, churches, bands, schools, theatres, sound rooms, etc.

Specifications:

Power Rating: 30W, 8Ω SPL (1W @ 1m): 87dB Freq. Response: 82Hz - 20kHz Dimensions: 130W x 105D x 170H Weight: 1.8kg/ speaker

These high power Redback® Bookshelf Series music speakers feature exceptional sound quality for professional sound reinforcement. They offer a stylish contoured profile together with a quick mounting bracket that virtually disappears once mounted. Connection is via the inbuilt gold plated banana sockets.

30W sealed speaker with 3.5" bass driver and mylar dome tweeter. Brilliant for background music systems or extension speakers.

Fantastic for pubs, hotels, clubs, DJs, churches, bands, schools, theatres, sound rooms, etc.

Specifications:

Power Rating: 30W, 8Ω SPL (1W @ 1m): 87dB Freq. Response: 82Hz - 20kHz Dimensions: 130W x 105D x 170H Weight: 1.8kg/ speaker

This high performance coaxial speaker is ideal for PA applications, background music systems or hi-fi extension speakers.
Diagonal mounting hole centres at 117mm. Mounting depth 50mm

Specificiations

Max Input Power: 30W Impedance: 8Ω Resonant Frequency: 90Hz Frequency Resp: 80Hz-20kHz SPL (1w @ 1m): 87dB

This quality high power wide range driver is ideal for public address and background music applications.
Diagonal mounting hole centres at 117mm.

Specifications:

Input Power: 5 Watts RMS Max Input Power: 10 Watts Impedance: 8Ω Resonant Frequency: 96Hz Frequency Resp: 90Hz - 14kHz SPL (1W @ 1m): 92dB

15 watt. 8Ω. High efficiency dual cone quality driver. Excellent midrange 'presence'.
Rolled edge cone suspension. Ideal for public address applications.
Diagonal mounting hole centres at 117mm.

Specifications:

Input Power: 8 Watts RMS Max Input Power: 15 Watts Impedance: 8Ω Resonant Frequency: 120Hz Frequency Response: 120Hz - 20kHz SPL (1W @ 1m): 95dB

500mW, 8Ω. Popular for use in kits.
Large ferrite magnet. Fixed using glue or clamping bracket.

400mW, 8Ω. As used in telephones, fax machines, modems etc. 5mm thick.
Diagonal mounting hole centres at 37mm.

Features unique mylar cone for a degree of weather resistance. 50mm 1W RMS. 8Ω. Diagonal mounting hole centres at 57mm.

Features unique mylar cone for a degree of weather resistance.
Fixed using glue or clamping bracket.
50mm 1W RMS, 2W MAX 8Ω.

Features unique mylar cone for a degree of weather resistance.
Fixed using glue or clamping bracket.
40mm 100mW RMS, 200mW MAX 8Ω.

Features unique mylar cone for a degree of weather resistance.
63mm 3 watt. 8Ω. Diagonal mounting hole centres at 76mm.

4 watt max. 4 and 8Ω taps. Great as a replacement car speaker. Diagonal mounting hole centres at 100mm.

Features unique mylar cone for a degree of weather resistance.
63mm 5W RMS. 8 Ohm. Diagonal mounting hole centres at 76mm

Features unique mylar cone for a degree of weather resistance.
66mm 2W RMS. 8Ω. Diagonal mounting hole centres at 75mm

Specifications

Impedance: 8Ω Resonant Frequency: 300Hz Power Input (Max): 2W Weight: 60G Cone Material: Mylar Edge Type: Fixed Edge Shape: Accordion Terminal Type: Solder

5 watt max. 4 and 8Ω taps. Great for use in intercoms, as monitor speakers, etc.
Diagonal mounting hole centres at 117mm.

Designed to withstand the physical abuse of vandals. Access to the 130mm +twin cone speaker requires the use of a security torx tool, minimising unauthorised tampering and/or theft. Features an enclosed transformer & magnet providing superior protection from damage and debris. Suitable for use in prisons, train stations, bus stations, pedestrian malls, etc. Adjustable mounting bracket suitable for ceiling thicknesses from 4mm to 35mm.

Specifications:

Dimensions: 189Ø x 110D. Power taps: 1.25, 2.5, 5 and 10W. Mounting cutout: 155mmØ.

Modelled on the popular Redback One-Shot design, the new ‘rat trap’ uses an ingenious patented spring mechanism that snaps like a rat trap when activated. The new improved design includes three retaining clips ensuring the grille fits snugly to the ceiling without sagging or drooping, even in soft ceilings. For best results we recommend a speaker hole of 140mm be cut using the T 2312A holesaw. The speaker driver and transformer combination has been custom engineered to provide high SPL & wide frequency range specifically for use in emergency warning systems, general paging or BGM applications. Fitted with 4 way wire protect terminal block, 22µF bipolar capacitor, transformer safety cover and cable restraint plate as required by Australian standard.

Specifications:

Power taps: 0.33, 0.66, 1.25 , 2.5, 5W SPL 1W @ 1m: 92dB @ 1KHz ±2dB Freq response: 100Hz - 15kHz Ceiling cutout: 140mm Ø

Redback® “One-Shot®” speaker assemblies install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for the pro sound installer are both obvious and substantial. The snap clip material is formulated to retain long service life strength and spring action, ensuring a snug vibration free fit to either gyprock tiles, mineral fibre tiles or fixed gyprock ceilings.

This model is a twin cone speaker suitable for commercial and industrial use, utilising 100V line systems. It is also fitted with a 4 way terminal block and 22µF BP capacitor and transformer cover to comply with AS2220.1 Fire/Evacuation standards.

Specifications:

Power taps: 0.66, 1.25, 2.5, 5, 10W Frequency Response: 100Hz- 15kHz SPL (1W @ 1M): 98dB Size: 100mm Hole Cutout (Ø): 140mm Connection: 4 way terminal block Colour: Black

Redback® “One-Shot®” speaker assemblies install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for the pro sound installer are both obvious and substantial. The snap clip material is formulated to retain long service life strength and spring action, ensuring a snug vibration free fit to either gyprock tiles, mineral fibre tiles or fixed gyprock ceilings.

This model is a twin cone speaker suitable for commercial and industrial use, utilising 100V line systems. It is also fitted with a 4 way terminal block and 22µF BP capacitor and transformer cover to comply with AS2220.1 Fire/Evacuation standards.

Specifications:

Power taps: 0.66, 1.25, 2.5, 5, 10W Frequency Response: 100Hz- 15kHz SPL (1W @ 1M): 98dB Size: 100mm Hole Cutout (Ø): 140mm Connection: 4 way terminal block Colour: White

Redback® “One-Shot®” speaker assemblies install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for the pro sound installer are both obvious and substantial. The snap clip material is formulated to retain long service life strength and spring action, ensuring a snug vibration free fit to either gyprock tiles, mineral fibre tiles or fixed gyprock ceilings.

Attention PA Installers! Using these speaker assemblies greatly reduces installation time compared to a standard speaker & grill combination. Typically, you will save about 5 minutes per speaker point. This equates to a significant saving in labour costs. Please refer to our online brochure for more detailed specifications on this product.

Redback® “One-Shot®” speaker assemblies install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for the pro sound installer are both obvious and substantial. The snap clip material is formulated to retain long service life strength and spring action, ensuring a snug vibration free fit to either gyprock tiles, mineral fibre tiles or fixed gyprock ceilings.

This model is a twin cone speaker suitable for commercial and industrial use, utilising 100V line systems. It is also fitted with a 4 way terminal block and 22µF BP capacitor and transformer cover to comply with AS2220.1 Fire/Evacuation standards.

Specifications:

Power taps: 0.33, 0.66, 1.25, 2.5, 5W Frequency Response: 100Hz- 15kHz SPL (1W @ 1M): 92dB Size: 100mm Hole Cutout (Ø): 140mm Connection: 4 way terminal block Colour: Black

Redback® “One-Shot®” speaker assemblies install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for the pro sound installer are both obvious and substantial. The snap clip material is formulated to retain long service life strength and spring action, ensuring a snug vibration free fit to either gyprock tiles, mineral fibre tiles or fixed gyprock ceilings.

This model is a twin cone speaker suitable for commercial and industrial use, utilising 100V line systems. It is also fitted with a 4 way terminal block and 22µF BP capacitor and transformer cover to comply with AS2220.1 Fire/Evacuation standards.

Specifications:

Power taps: 0.33, 0.66, 1.25, 2.5, 5W Frequency Response: 100Hz- 15kHz SPL (1W @ 1M): 92dB Size: 100mm Hole Cutout (Ø): 140mm Connection: 4 way terminal block

Redback® “One-Shot®” speaker assemblies install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for the pro sound installer are both obvious and substantial. The snap clip material is formulated to retain long service life strength and spring action, ensuring a snug vibration free fit to either gyprock tiles, mineral fibre tiles or fixed gyprock ceilings.

This model is a twin cone speaker suitable for commercial and industrial use, utilising 100V line systems and fitted with a 2 way terminal block.

Attention PA Installers! Using these speaker assemblies greatly reduces installation time compared to a standard speaker & grill combination. Typically, you will save about 5 minutes per speaker point. This equates to a significant saving in labour costs.

Please refer to our online brochure for more detailed specifications on this product.

Specifications

Power taps: 0.33, 0.66, 1.25, 2.5, 5W Frequency Response: 100Hz- 15kHz Sensitivity (1W @ 1M): 92dB Size: 100mm Hole Cutout (Ø): 140mm Connection: 2 way terminal block

Redback® “One-Shot®” speaker assemblies install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for the pro sound installer are both obvious and substantial. The snap clip material is formulated to retain long service life strength and spring action, ensuring a snug vibration free fit to either gyprock tiles, mineral fibre tiles or fixed gyprock ceilings.

This model One-Shot is an 8 ohm coaxial type speaker selected for use in home theatre and stereo systems. Exhibits extended frequency response and excellent midrange presence.

Attention PA Installers! Using these speaker assemblies greatly reduces installation time compared to a standard speaker & grill combination. Typically, you will save about 5 minutes per speaker point. This equates to a significant saving in labour costs.

Please refer to our online brochure for more detailed specifications on this product.

Specifications:

Power Taps: 8Ω 15W Frequency Response: 80Hz- 20kHz SPL (1W @ 1M): 88dB Size: 100mm Hole Cutout (Ø): 140mm

Redback® “One-Shot®” speaker assemblies install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for the pro sound installer are both obvious and substantial. The snap clip material is formulated to retain long service life strength and spring action, ensuring a snug vibration free fit to either gyprock tiles, mineral fibre tiles or fixed gyprock ceilings.

This model One-Shot is an 8 ohm twin cone type speaker selected for use in home theatre and stereo systems. Rated at 10W it exhibits extended frequency response and excellent midrange presence.

Specifications:

Power Rating: 8Ω 50W Frequency Response: 80Hz- 18kHz SPL (1W @ 1M): 92dB Size: 200mm Hole Cutout (Ø): 246mm Colour: Black

Redback® “One-Shot®” speaker assemblies install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for the pro sound installer are both obvious and substantial. The snap clip material is formulated to retain long service life strength and spring action, ensuring a snug vibration free fit to either gyprock tiles, mineral fibre tiles or fixed gyprock ceilings.

This model One-Shot is an 8 ohm twin cone type speaker selected for use in home theatre and stereo systems. Rated at 10W it exhibits extended frequency response and excellent midrange presence.

Specifications:

Power Rating: 8Ω 50W Frequency Response: 80Hz- 18kHz SPL (1W @ 1M): 92dB Size: 200mm Hole Cutout (Ø): 246mm

Redback® “One-Shot®” speaker assemblies install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for the pro sound installer are both obvious and substantial. The snap clip material is formulated to retain long service life strength and spring action, ensuring a snug vibration free fit to either gyprock tiles, mineral fibre tiles or fixed gyprock ceilings.

This model is a coaxial type speaker suitable for commercial and industrial use, utilising 100V line systems and fitted with a 2 way terminal block.

Attention PA Installers! Using these speaker assemblies greatly reduces installation time compared to a standard speaker & grill combination. Typically, you will save about 5 minutes per speaker point. This equates to a significant saving in labour costs.

Specifications:

Power Taps: 1.25, 2.5, 5, 10, 15W Frequency Response: 45Hz- 20kHz SPL (1W @ 1M): 92dB Size: 200mm Hole Cutout (Ø): 246mm Connection: 2 way terminal block

Redback® “One-Shot®” speaker assemblies install in seconds. They simply snap fit to any 10-13mm thickness ceiling by means of the integral pressure clips. The labour cost savings for the pro sound installer are both obvious and substantial. The snap clip material is formulated to retain long service life strength and spring action, ensuring a snug vibration free fit to either gyprock tiles, mineral fibre tiles or fixed gyprock ceilings.

This model is a twin cone speaker suitable for commercial and industrial use, utilising 100V line systems and fitted with a 2 way terminal block.

Attention PA Installers! Using these speaker assemblies greatly reduces installation time compared to a standard speaker & grill combination. Typically, you will save about 5 minutes per speaker point. This equates to a significant saving in labour costs.

Specifications:

Power Taps: 1.25, 2.5, 5, 10, 15W Frequency Response: 55Hz- 15kHz SPL (1W @ 1M): 90dB Size: 200mm Hole Cutout (Ø): 246mm Connection: 2 way terminal block Colour: Black

This wall mount speaker has jarrah ”look“ timber ends and an attractive black acoustic cloth. It is fitted with a high performance 8” dual cone speaker complete with a 100V line transformer tapped 0.33, 0.6, 1.25, 2.5 and 5W. Features a front mounted volume control.

This slimline unobtrusive 6.5” loudspeaker is constructed from high impact ABS. The unique aluminium wall mount bracket includes “tamper resistant” security screw provision.

Fitted with front mount volume control and override relay.

Specifications:

Power Taps: 6W ,3W ,1.5W taps SPL 1W @ 1M: 93dB Frequency Response: 160Hz - 20kHz Dimensions: 210L x 210W x 85D Weight: Approx: 1.2Kgs

This wall mount speaker has jarrah "look" timber ends and an attractive black acoustic cloth. It is fitted with a high performance 8" dual cone speaker complete with a 100V line transformer tapped 0.33, 0.6, 1.25, 2.5 and 5W.

This slimline unobtrusive 6.5” loudspeaker is constructed from high impact ABS. The unique aluminium wall mount bracket includes “tamper resistant” security screw provision.

Specifications:

Power Taps: 6W ,3W ,1.5W taps SPL 1W @ 1M: 93dB Frequency Response: 160Hz - 20kHz Dimensions: 210L x 210W x 85D Weight: Approx: 1.2Kgs

Architecturally elegant, the cabinet is moulded from ABS and fitted with powdercoated steel mesh grill. Includes a 6 inch 10W coaxial driver for high performance paging and music reproduction. These attractive speakers can be either vertically or horizontally mounted and are suitable for restaurants, art galleries, shops etc.

Specifications:

Power Taps: 1.25W ,2.5W , 5W ,10W SPL: 1W @ 1M at 93dB Freq. Resp.: 110Hz - 20kHz Dimensions: 240L x 330W x 88D Weight: Approx: 1.2Kgs

This cabinet is designed to withstand the physical abuse of vandals. Access to the 130mm dual cone speaker requires the use of an allen key, minimising unauthorised tampering and/or theft. Features multiple conduit entries. Suitable for use in prisons, train stations, bus stations, pedestrian malls, etc.

Specifications:

Dimensions: 190W x 190H x 75D Power taps: 0.25, 0.75, 1.5, 3 and 6W

High quality, high performance ceiling mount speakers. All feature excellent hi-fi reproduction and high power handling capability. The dome tweeter is 'eyeball' mounted, enabling the optimisation of lateral high frequency response. This model includes a sealed 'back box' which protects the speakers from vermin and dust ingress.

Designed to be installed into ceilings or walls, this low profile attractive speaker system and grill will compliment a wide range of hi-fi and A/V sound systems, and can be utilised in outdoor or marine environments. The efficient polycone driver produces clear bass and midband response, while the dome tweeters provide crisp clean high frequencies. The speakers include two-way passive crossovers.

Installation is simplified by the use of swivelling mounting clamps, which rotate and then clamp onto the mounting surface as the screws are tightened.

Note: For PA or background music installations, an M 1126A (30W) or M 1130 (40W) 100V line transformer can be fitted for sound reinforcement applications.

Specifications

Impedance: 8Ω Power Input: 40W RMS, 100W Max SPL (1W @ 1m): 89dB Frequency Response: 60Hz - 20kHz Weight: 2.7kg each Mounting Hole Size: 248Ømm Dimensions: 280Ø x 190Dmm approx.

High quality, high performance ceiling mount speakers. All feature excellent hi-fi reproduction and high power handling capability. The dome tweeter is 'eyeball' mounted, enabling the optimisation of lateral high frequency response.

Designed to be installed into ceilings or walls, this low profile attractive speaker system and grill will compliment a wide range of hi-fi and A/V sound systems, and can be utilised in outdoor or marine environments. The efficient polycone driver produces clear bass and midband response, while the dome tweeters provide crisp clean high frequencies. The speakers include two-way passive crossovers.

Installation is simplified by the use of swivelling mounting clamps, which rotate and then clamp onto the mounting surface as the screws are tightened.

Note: For PA or background music installations, an M 1126A (30W) or M 1130 (40W) 100V line transformer can be fitted for sound reinforcement applications.

Specifications:

Impedance: 8Ω Power Input: 40W RMS, 100W Max SPL (1W @ 1m): 90dB Frequency Response: 60Hz - 20kHz Weight: 1.8kg each Mounting Hole Size: 242Ømm Dimensions: 273Ø x 101Dmm approx.

An outstanding choice for use in in-wall or ceiling applications such as home theatre or reticulated music systems. Features excellent hi-fi reproduction and high power handling capability.

Designed to be installed into ceilings or walls, this low profile attractive speaker system and grill will compliment a wide range of hi-fi and A/V sound systems, and can be utilised in outdoor or marine environments. The efficient polycone driver produces clear bass and midband response, while the dome tweeters provide crisp clean high frequencies. The speakers include two-way passive crossovers.

Installation is simplified by the use of swivelling mounting clamps, which rotate and then clamp onto the mounting surface as the screws are tightened.

Note: For PA or background music installations, an M 1126A (30W) or M 1130 (40W) 100V line transformer can be fitted for sound reinforcement applications.

Specifications

Impedance: 8Ω Power Input: 40W RMS, 100W Max SPL (1W @ 1m): 90dB, Frequency Response: 60Hz - 20kHz Crossover Frequency: 2.0kHz Weight: 1.8kg Mounting Hole Size: 325 x 222mm Dimensions: 358L x 255W x 108Hmm

High quality, high performance ceiling mount speakers. All feature excellent hi-fi reproduction and high power handling capability. The dome tweeter is 'eyeball' mounted, enabling the optimisation of lateral high frequency response. This model includes a sealed 'back box' which protects the speakers from vermin and dust ingress.

Designed to be installed into ceilings or walls, this low profile attractive speaker system and grill will compliment a wide range of hi-fi and A/V sound systems, and can be utilised in outdoor or marine environments. The efficient polycone driver produces clear bass and midband response, while the dome tweeters provide crisp clean high frequencies. The speakers include two-way passive crossovers.

Installation is simplified by the use of swivelling mounting clamps, which rotate and then clamp onto the mounting surface as the screws are tightened.

Note: For PA or background music installations, an M 1126A (30W) or M 1130 (40W) 100V line transformer can be fitted for sound reinforcement applications.

Specifications

Impedance: 8Ω Power Input: 30W RMS, 80W Max SPL (1W @ 1m): 90dB Frequency Response: 60Hz - 20kHz Weight: 1.4kg each Mounting Hole Size: 200Ømm Dimensions: 230Ø x 135Dmm approx.

Illustrated with grill removed

High quality, high performance ceiling mount speakers. All feature excellent hi-fi reproduction and high power handling capability. The dome tweeter is 'eyeball' mounted, enabling the optimisation of lateral high frequency response.

Designed to be installed into ceilings or walls, this low profile attractive speaker system and grill will compliment a wide range of hi-fi and A/V sound systems, and can be utilised in outdoor or marine environments. The efficient polycone driver produces clear bass and midband response, while the dome tweeters provide crisp clean high frequencies. The speakers include two-way passive crossovers.

Installation is simplified by the use of swivelling mounting clamps, which rotate and then clamp onto the mounting surface as the screws are tightened.

Note: For PA or background music installations, an M 1126A (30W) or M 1130 (40W) 100V line transformer can be fitted for sound reinforcement applications.

Specifications

Impedance: 8Ω Power Input: 30W RMS, 80W Max SPL (1W @ 1m): 90dB Frequency Response: 60Hz - 20kHz Weight: 1.1kg each Mounting Hole Size: 200Ømm Dimensions: 230Ø x 90Dmm approx.

Illustrated with grill removed

An outstanding choice for use in in-wall or ceiling applications such as home theatre or reticulated music systems. Features excellent hi-fi reproduction and high power handling capability.

Designed to be installed into ceilings or walls, this low profile attractive speaker system and grill will compliment a wide range of hi-fi and A/V sound systems, and can be utilised in outdoor or marine environments. The efficient polycone driver produces clear bass and midband response, while the dome tweeters provide crisp clean high frequencies. The speakers include two-way passive crossovers.

Installation is simplified by the use of swivelling mounting clamps, which rotate and then clamp onto the mounting surface as the screws are tightened.

Note: For PA or background music installations, an M 1126A (30W) or M 1130 (40W) 100V line transformer can be fitted for sound reinforcement applications.

Specifications:

Impedance: 8Ω Power Input: 35W RMS, 80W Max SPL (1W @ 1m): 90dB, Frequency Response: 50Hz - 20kHz Qts: 0.64 Vas: 15.98 cu ft (Infinite Baffle) Crossover Frequency: 2.5kHz Weight: 1.6kg each Mounting Hole Size: 275 x 190mm Dimensions: 304L x 223W x 88Hmm

Illustrated with grill removed

This dual input speaker is engineered to provide stereo imaging from a single speaker unit. It is used when installing two separate left and right channel speakers is impractical. ie in a confined space. It features +3dB bass and treble boost switches for tailoring the sound to suit the installation. Great for kitchens, bathrooms, dens and other small rooms.

Designed to be installed into ceilings or walls, this low profile attractive speaker system and grill will compliment a wide range of hi-fi and A/V sound systems, and can be utilised in outdoor or marine environments. The efficient polycone driver produces clear bass and midband response, while the dome tweeters provide crisp clean high frequencies. The speakers include two-way passive crossovers.

Installation is simplified by the use of swivelling mounting clamps, which rotate and then clamp onto the mounting surface as the screws are tightened.

Note: For PA or background music installations, an M 1126A (30W) or M 1130 (40W) 100V line transformer can be fitted for sound reinforcement applications.

Specifications

Impedance: 8Ω Power Input: 30W RMS, 80W Max Sensitivity: 90dB, 1W @ 1m Frequency Response: 60Hz - 20kHz Weight: 1.3kg each Mounting Hole Size: 190mm Ø Dimensions: 230Ø x 90Dmm

An important part of any surround system is the centre speaker. This is the speaker that primarily produces movie dialogue and as such must be mounted as close as possible to the TV screen. Designed to be flush mounted, this speaker is fantastic for use in home theatre applications. The magnetically shielded drivers eliminate interference with television sets.

Designed to be installed into ceilings or walls, this low profile attractive speaker system and grill will compliment a wide range of hi-fi and A/V sound systems, and can be utilised in outdoor or marine environments. The efficient polycone driver produces clear bass and midband response, while the dome tweeters provide crisp clean high frequencies. The speakers include two-way passive crossovers.

Installation is simplified by the use of swivelling mounting clamps, which rotate and then clamp onto the mounting surface as the screws are tightened.

Note: For PA or background music installations, an M 1126A (30W) or M 1130 (40W) 100V line transformer can be fitted for sound reinforcement applications.

Specifications

Impedance: 8 Ω Power Input: 30W RMS, 50W Max Sensitivity: 88dB, 1W @ 1m Frequency Response: 70Hz - 20kHz Weight: 2.9kg each Mounting Hole Size: 420 x 187D approx. Dimensions: 450 x 220 x 80mm approx.

These Opus One Platinum series speakers are designed for the discerning hi-fi and home theatre listener. The customised drivers exhibit extended bass response and punchy, crisp midrange. The titanium dome tweeter is suspended allowing a greater excursion from the woven carbon fibre woofer cone. The large vented magnet, oversized voicecoil and rubber rolled surround enable a very high power handling capability. A custom designed crossover, constructed from world class, premium components provides excellent sonic performance and clarity. Sound performance may be tailored using the built in bass and treble control switches ie. to suit the acoustics of the room or listeners preference. These are located behind the front grill and are accessed without removing the speaker from the ceiling. Features an attractive aluminium grill and the Opus One standard ‘flip-lock’ mounting system. Sold in pairs.

Specifications:

Impedance: 8Ω Rated power: 80W RMS Max power: 120W SPL 1W @ 1m: 91dB Freq response: 50Hz - 20kHz Weight: 2.6kg Mounting hole size (mm): 247 Dimensions (mm): 280Ø x 115D

These Opus One Platinum series speakers are designed for the discerning hi-fi and home theatre listener. The customised drivers exhibit extended bass response and punchy, crisp midrange. The titanium dome tweeter is suspended allowing a greater excursion from the woven carbon fibre woofer cone. The large vented magnet, oversized voicecoil and rubber rolled surround enable a very high power handling capability. A custom designed crossover, constructed from world class, premium components provides excellent sonic performance and clarity. Sound performance may be tailored using the built in bass and treble control switches ie. to suit the acoustics of the room or listeners preference. These are located behind the front grill and are accessed without removing the speaker from the ceiling. Features an attractive aluminium grill and the Opus One standard ‘flip-lock’ mounting system. Sold in pairs.

Specifications

Impedance: 8Ω Rated power: 60W RMS Max power: 100W SPL 1W @ 1m: 90dB Freq response: 55Hz - 20kHz Weight: 1.8kg Mounting hole size (mm): 204 Dimensions (mm): 240Ø x 98D

Employing an all-weather polypropylene cone and rubber surround ensuring extended service life
when used either for indoor or outdoor applications. Extremely compact it is well suited to confined areas. The C 0840 is an excellent choice for mounting in boats, alfresco areas, bathrooms, under eaves etc. Installation is made very simple by the in-built swivel clamps.
Suits ceilings or walls up to 29mm thick. Sold in pairs. Ceiling or panel cut out required 143Ømm.

IP65 rated for outdoor use. Great for boats, yachts, outdoor areas etc.
Features aluminium grill & stainless steel fixings.

Specifications:

Impedance: 4Ω Rated power: 10W RMS Max power: 30W SPL 1W @ 1m: 88dB Freq response: 65Hz - 17kHz Weight: 685g Mounting hole size (mm): 143Ø Dimensions (mm): 150Ø x 68D

Designed for securing the speaker to the grill. Simply push down onto the locating posts. Quick and easy installation. Suits C 0805 and C 0815 Super Slimline speaker grills. Pk 100

Designed for securing the speaker to the grill. Simply push down onto the locating posts. Quick and easy installation. Suits C 0805 and C 0815 Super Slimline speaker grills. Pk 12

Super slimline grill with screw flush caps. Excellent for architecturally sensitive applications. Includes speaker mounting posts for 100mm speaker.

Features:

Ultra slim profile Attractive good looks Cover caps to conceal fixing screws Loudspeaker recesses into grill body Very quick to install using GYPSEE Screws

Specifications:

Overall diameter: 155mm Screw holes: 6mmØ

Screw Cover Caps tilt up for easy removal

Standard grill for 100mm(4”) speakers, includes push in flush caps to hide fixing screw recesses. Manufactured from talc-filled polypropylene.

Specifications:

Overall diameter: 130mm Screw holes: 4.5mmØ

Traditional louvered ceiling grill. Includes mounting holes for 200mm speaker. Manufactured from talc-filled polypropylene.

Specifications:

Overall diameter: 252mm Screw holes: 5mmØ

Moulded from industrial grade, talc-filled polypropylene and designed to mount directly to the underside of concrete slabs or inaccessible ceilings. The housing is surface mounted with concealed internal fixings. Speaker cable entry can be either from the rear, or via surface mounted conduit (four 19mm conduit knockouts are provided). An excellent choice for use in plant rooms, warehouses, shopping centres, malls etc. The speaker is fitted with a 100V line transformer tapped at 0.33, 0.66, 1.25, 2.5 and 5W. Includes 4 way wire protected terminal strip and a 22µF bipolar capacitor for line monitoring applications in EWIS systems.
'One-Shot' design simply snap-fits in seconds to the surface mounting ring, reducing installation time considerably.

Moulded from industrial grade, talc-filled polypropylene and designed to mount directly to the underside of concrete slabs or inaccessible ceilings. The housing is surface mounted with concealed internal fixings. Speaker cable entry can be either from the rear, or via surface mounted conduit (four 19mm conduit knockouts are provided). An excellent choice for use in plant rooms, warehouses, shopping centres, malls etc. The speaker is fitted with a 100V line transformer tapped at 0.33, 0.66, 1.25, 2.5 and 5W. Includes 4 way wire protected terminal strip and a 22µF bipolar capacitor for line monitoring applications in EWIS systems.
'One-Shot' design simply snap-fits in seconds to the surface mounting ring, reducing installation time considerably.

Industrial speaker unit housed in sturdy powdercoated steel chassis with mounting flanges. Fitted with a multi-tap transformer (enabling power taps of 0.33, 0.66, 1.25, 2.5 and 5W) plus a 4 way wire protect terminal strip and a 22µF bipolar isolation capacitor for line monitoring with EWIS and emergency applications.

Overall cabinet dimensions:

˜268W x 270L x 80H mm (excluding mounting flanges).

Industrial speaker unit housed in sturdy powdercoated steel chassis with mounting flanges. Fitted with a multi-tap transformer (enabling power taps of 0.33, 0.66, 1.25, 2.5 and 5W) plus a 4 way wire protect terminal strip and a 22µF bipolar isolation capacitor for line monitoring with EWIS and emergency applications.

Overall cabinet dimensions:

~157W x 160L x 75H mm (excluding mounting flanges).

Moulded from industrial grade, talc-filled polypropylene and designed to mount directly to the underside of concrete slabs or inaccessible ceilings. The housing is surface mounted with concealed internal fixings. Speaker cable entry can be either from the rear, or via surface mounted conduit (four 19mm conduit knockouts are provided). An excellent choice for use in plant rooms, warehouses, shopping centres, malls etc. The speaker is fitted with a 100V line transformer tapped at 0.33, 0.66, 1.25, 2.5 and 5W. Includes 4 way wire protected terminal strip and a 22µF bipolar capacitor for line monitoring applications in EWIS systems. Speaker is mounted to the grill which is then screw fixed to the surface mounting ring.

Specifications:

Rated: 5W SPL 1W @ 1m: 90dB Freq. Resp.: 100Hz-20kKz Overall Dimensions: 220mmØ x 55mm high.

Moulded from industrial grade, talc-filled polypropylene and designed to mount directly to the underside of concrete slabs or inaccessible ceilings. The housing is surface mounted with concealed internal fixings. Speaker cable entry can be either from the rear, or via surface mounted conduit (four 19mm conduit knockouts are provided). An excellent choice for use in plant rooms, warehouses, shopping centres, malls etc. The speaker is fitted with a 100V line transformer tapped at 0.33, 0.66, 1.25, 2.5 and 5W. Includes 4 way wire protected terminal strip and a 22µF bipolar capacitor for line monitoring applications in EWIS systems. This speaker features 'One-Shot' design, simply snap-fits in seconds to the surface mounting ring, reducing installation time considerably.

Overall Dimensions:

220mmØ x 55mm high.

** Minimum purchase of 12 units ** The install bracket as used with C 0703/4 "OneShot" Surface Mount speakers.

Moulded from industrial grade, talc-filled polypropylene and designed to mount directly to the underside of concrete slabs or inaccessible ceilings. The housing is surface mounted with concealed internal fixings. Speaker cable entry can be either from the rear, or via surface mounted conduit (four 19mm conduit knockouts are provided). An excellent choice for use in plant rooms, warehouses, shopping centres, malls etc. The speaker is fitted with a 100V line transformer tapped at 0.33, 0.66, 1.25, 2.5 and 5W. Includes 4 way wire protected terminal strip and a 22µF bipolar capacitor for line monitoring applications in EWIS systems. This speaker features 'One-Shot' design, simply snap-fits in seconds to the surface mounting ring, reducing installation time considerably.

Overall Dimensions:

220mmØ x 55mm high.