1W Carbon Film Resistor 5% Tolerance.

Manufacturers please note, to purchase a full box of bandoliered resistors, order 10 packs of 100.

Dimensions:

L: 12mm D: 4.5mm d: 0.8mm H: 25mm

1W Carbon Film Resistor 5% Tolerance.

Manufacturers please note, to purchase a full box of bandoliered resistors, order 10 packs of 100.

Dimensions:

L: 12mm D: 4.5mm d: 0.8mm H: 25mm

1W Carbon Film Resistor 5% Tolerance.

Manufacturers please note, to purchase a full box of bandoliered resistors, order 10 packs of 100.

Dimensions:

L: 12mm D: 4.5mm d: 0.8mm H: 25mm

1W Carbon Film Resistor 5% Tolerance.

Manufacturers please note, to purchase a full box of bandoliered resistors, order 10 packs of 100.

Dimensions:

L: 12mm D: 4.5mm d: 0.8mm H: 25mm

1W Carbon Film Resistor 5% Tolerance.

Manufacturers please note, to purchase a full box of bandoliered resistors, order 10 packs of 100.

Dimensions:

L: 12mm D: 4.5mm d: 0.8mm H: 25mm

1W Carbon Film Resistor 5% Tolerance.

Manufacturers please note, to purchase a full box of bandoliered resistors, order 10 packs of 100.

Dimensions:

L: 12mm D: 4.5mm d: 0.8mm H: 25mm

1W Carbon Film Resistor 5% Tolerance.

Manufacturers please note, to purchase a full box of bandoliered resistors, order 10 packs of 100.

Dimensions:

L: 12mm D: 4.5mm d: 0.8mm H: 25mm

1W Carbon Film Resistor 5% Tolerance.

Manufacturers please note, to purchase a full box of bandoliered resistors, order 10 packs of 100.

Dimensions:

L: 12mm D: 4.5mm d: 0.8mm H: 25mm

1W Carbon Film Resistor 5% Tolerance.

Manufacturers please note, to purchase a full box of bandoliered resistors, order 10 packs of 100.

Dimensions:

L: 12mm D: 4.5mm d: 0.8mm H: 25mm

1W Carbon Film Resistor 5% Tolerance.

Manufacturers please note, to purchase a full box of bandoliered resistors, order 10 packs of 100.

Dimensions:

L: 12mm D: 4.5mm d: 0.8mm H: 25mm

1W Carbon Film Resistor 5% Tolerance.

Manufacturers please note, to purchase a full box of bandoliered resistors, order 10 packs of 100.

Dimensions:

L: 12mm D: 4.5mm d: 0.8mm H: 25mm

1W Carbon Film Resistor 5% Tolerance.

Manufacturers please note, to purchase a full box of bandoliered resistors, order 10 packs of 100.

Dimensions:

L: 12mm D: 4.5mm d: 0.8mm H: 25mm

1W Carbon Film Resistor 5% Tolerance.

Manufacturers please note, to purchase a full box of bandoliered resistors, order 10 packs of 100.

Dimensions:

L: 12mm D: 4.5mm d: 0.8mm H: 25mm

1W Carbon Film Resistor 5% Tolerance.

Manufacturers please note, to purchase a full box of bandoliered resistors, order 10 packs of 100.

Dimensions:

L: 12mm D: 4.5mm d: 0.8mm H: 25mm

1W Carbon Film Resistor 5% Tolerance.

Manufacturers please note, to purchase a full box of bandoliered resistors, order 10 packs of 100.

Dimensions:

L: 12mm D: 4.5mm d: 0.8mm H: 25mm

Ideal for making prototype PCBs, one off projects. Simply photocopy or laser print your artwork onto the film, cut to size, iron on to your copper laminated blank, then etch.

Pack of 5. Size 206mm x 280mm.

Double-sided, copper clad. 300 x 300mm Fibreglass PCB board. Ideal for prototyping and one off PCB’s.

Single-sided, copper clad. 300 x 300mm. Ideal for prototyping and one off PCB’s.

To suit DIP package IC’s. Pre-drilled copper strip board. 0.9mm holes 2.54mm (0.1") spacing. 2 sizes available.

To suit DIP package IC’s. Pre-drilled copper strip board. 0.9mm holes 2.54mm (0.1") spacing. 2 sizes available.

Designed to be used with an 80mm cooling fan, which can be bolted to the holes at the end of the heatsink. Extremely effective for audio power amplifiers. Flat face on rear for mounting flat-pack output devices. All 80W x 50H mm.

Specifications:

Length:300mm Thermal Res. :0.62°C/W

Designed to be used with an 80mm cooling fan, which can be bolted to the holes at the end of the heatsink. Extremely effective for audio power amplifiers. Flat face on rear for mounting flat-pack output devices. All 80W x 50H mm.

Specifications:

Length:250mm Thermal Res. :0.67°C/W

Designed to be used with an 80mm cooling fan, which can be bolted to the holes at the end of the heatsink. Extremely effective for audio power amplifiers. Flat face on rear for mounting flat-pack output devices. All 80W x 50H mm.

Specifications:

Length:200mm Thermal Res. :0.75°C/W

Designed to be used with an 80mm cooling fan, which can be bolted to the holes at the end of the heatsink. Extremely effective for audio power amplifiers. Flat face on rear for mounting flat-pack output devices. All 80W x 50H mm.

Specifications:

Length:150mm Thermal Res. :0.89°C/W

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

** Minimum purchase of 10 units ** 5W Wire-wound Resistor 5% Tolerance.

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

5W Wire-wound Resistor 5% Tolerance.

 

Dimensions:

L: 22mm d: 0.8mm H: 27mm Note: Wire-wound resistors are non inductive up to 27Ω value.

Made from clear see through plastic these parts cases are ideal for storing nuts, bolts, washers and components. Three sizes available.
5 Way 175 x 95 x 38 (mm)

Made from clear see through plastic these parts cases are ideal for storing nuts, bolts, washers and components. Three sizes available.
6 Way 210 x 110 x 44 (mm)

Made from clear see through plastic these parts cases are ideal for storing nuts, bolts, washers and components. Three sizes available.
15 Way 260 x 175 x 43 (mm)

Made from clear see through plastic these parts cases are ideal for storing nuts, bolts, washers and components.
18 Way 209 x 117 x 31 (mm)

Pack of 10 dividers to suit H 0239 only.

Handy storage for the workbench. After evaluating many models, these drawers were by far the best quality we found. Each model is supplied with a full set of crystal transparent drawers.

347W x 152D x 187Hmm

Unique design allows units to be “dovetailed” together. Single or double drawers available. H 0235 Single Drawer Unit (115W x 120D x 50H)

Constructed from high impact ABS plastic this handheld case has been designed for any remote control application. Includes inbuilt battery compartment which suits 4 x AA batteries (terminals available separately), or a 9V for use with battery snap (P 0455). Internal PCB mounting posts are provided. Features a recessed 55 x 155mm lexan area.

Dimensions:

65W x 182D x 28H mm

Stylish ABS handheld case with front panel lexan area (64 x 119mm). The slightly tapered design fits comfortably within the hand making it the ideal enclosure for remote control applications. H 0288 include inbuilt battery compartment which suits 4 x AA batteries (terminals available separately), or a 9V for use with battery snap (P 0455).

Dimensions:

88W x 144D x 30H mm

Stylish ABS handheld case with front panel lexan area (64 x 119mm). The slightly tapered design fits comfortably within the hand making it the ideal enclosure for remote control applications. H 0287 include inbuilt battery compartment which suits 4 x AA batteries (terminals available separately), or a 9V for use with battery snap (P 0455).

Dimensions:

88W x 144D x 30H mm

4 x AA battery contacts

Handy grey plastic belt clip. Suits cases H 0342 - H 0346.

Handy black plastic belt clip. Suits cases H 0342 - H 0346.
Case not included.

AA Battery Terminals to suit H 0351/2

Batt Tecxus Alk LR23A 1pk Card

Compact handheld enclosure designed for test equipment, remote controls, RF equipment etc.
The two part construction has inbuilt standoffs in both halves for mounting a PCB. Includes inbuilt
battery compartment which suits 2xAA batteries (terminals available separately), or a 9V for use with battery snap (P 0355). Top side includes a recess for lexan or aluminium panel. Supplied with
belt clip.

Compact handheld enclosure designed for test equipment, remote controls, RF equipment etc.
The two part construction has inbuilt standoffs in both halves for mounting a PCB. Includes inbuilt battery compartment which suits 2xAA batteries (terminals available separately), or a 9V for use with battery snap (P 0355). Top side includes a recess for lexan or aluminium panel. Supplied with
belt clip.

Stylish ABS handheld case with front panel lexan area (64 x 119mm). The slightly tapered design fits comfortably within the hand making it the ideal enclosure for remote control applications.

Dimensions:

88W x 144D x 30H mm

This stylish ABS project box is ideal for housing test equipment, control equipment, etc. Incorporates 5 moulded posts in the base for mounting a PCB. Supplied with two panels, one with a cutout (Approx. 53mmW x 23mmH) to suit a display, the other is a blank panel which can be easily machined to accept LCD displays, switches, indicators, etc. It also includes a recess for inlaying a lexan panel. Features a battery compartment that can hold either 2 x 'AA' or a single 9V battery.

Dimensions

105W x 190D x 60H

Slide out battery compartment

Includes pre-punched panel

ABS project box ideal for DMM adaptors, test gear, remote controls etc. Features battery compartment with screw on cover and PCB mounting points.

Dimensions

160L x 30H x 85W

ABS project box ideal for DMM adaptors, test gear, remote controls etc. Features battery compartment with screw on cover and PCB mounting points. H 0345 Dimensions 160L x 30H x 85W mm.

Dimensions

160L x 30H x 85W

ABS project box ideal for DMM adaptors, test gear, remote controls etc. Features battery compartment with screw on cover and PCB mounting points.

Dimensions

130L x 25H x 68W mm

ABS project box ideal for DMM adaptors, test gear, remote controls etc. Features battery compartment with screw on cover and PCB mounting points. H 0342 Dimensions 130L x 25H x 68W mm.

Dimensions

130L x 25H x 68W mm

This professional series features solid ABS screw-together construction, integral PCB guides and an attractive rounded finish. All models feature a removable front panel which can be machined as required. Both halves of the case include moulded PCB mounting posts. Larger sizes (H 0335, H 0337 & H 0339) include stick on rubber feet and brass screw inserts. H 0340 includes an Infra-Red panel for designs where enclosure is used for remote controls.

Dimensions

60W x 100D x 25H

This professional series features solid ABS screw-together construction, integral PCB guides and an attractive rounded finish. All models feature a removable front panel which can be machined as required. Both halves of the case include moulded PCB mounting posts. Larger sizes (H 0335, H 0337 & H 0339) include stick on rubber feet and brass screw inserts. H 0340 includes an Infra-Red panel for designs where enclosure is used for remote controls.

Dimensions

135W x 185D x 40H

This professional series features solid ABS screw-together construction, integral PCB guides and an attractive rounded finish. All models feature a removable front panel which can be machined as required. Both halves of the case include moulded PCB mounting posts. Larger sizes (H 0335, H 0337 & H 0339) include stick on rubber feet and brass screw inserts. H 0340 includes an Infra-Red panel for designs where enclosure is used for remote controls.

Dimensions

100W x 135D x 40H

This professional series features solid ABS screw-together construction, integral PCB guides and an attractive rounded finish. All models feature a removable front panel which can be machined as required. Both halves of the case include moulded PCB mounting posts. Larger sizes (H 0335, H 0337 & H 0339) include stick on rubber feet and brass screw inserts. H 0340 includes an Infra-Red panel for designs where enclosure is used for remote controls.

Dimensions

100W x 165D x 35H

These feet suit the above enclosures and do not affect their sealing capabilities. Doubles as a mounting flange for attaching boxes to bulkheads without compromising the seal. Pack contains 4 feet and four self tappers to attach to enclosure.

Suits the following models:

H 0300 H 0301 H 0302 H 0303 H 0304 H 0305 H 0306 H 0307 H 0308 H 0310 H 0320 H 0321 H 0322 H 0323 H 0324 H 0325 H 0326 H 0327 H 0328 H 0330 H 0393 H 0395 H 0398

This professional series features solid ABS screw-together construction, internal PCB guides and an attractive rounded finish. Larger sizes (H 0218, H 0220 & H 0222) include stick on rubber feet and brass screw inserts. Dust and moisture proof.

Note: Case colour is dark grey. Picture for illustration purposes only.

Dimensions

100W x 190D x 40H

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Available with transparent or solid colour lid. PCB mounting points are moulded into the enclosure base.These sturdy enclosures have 3mm thick walls and are rated to UL 94V-0 (-40° to 75°C). Not UV stabilised.

Dimensions:

220L x 160W x 80H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Available with transparent or solid colour lid. PCB mounting points are moulded into the enclosure base.These sturdy enclosures have 3mm thick walls and are rated to UL 94V-0 (-40° to 75°C). Not UV stabilised.

Dimensions:

220L x 165W x 60H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Available with transparent or solid colour lid. PCB mounting points are moulded into the enclosure base.

Dimensions

186L x 146W x 75H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Available with transparent or solid colour lid. PCB mounting points are moulded into the enclosure base.

Dimensions

165L x 125W x 75H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Available with transparent or solid colour lid. PCB mounting points are moulded into the enclosure base.

Dimensions

145L x 105W x 65H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Available with transparent or solid colour lid. PCB mounting points are moulded into the enclosure base.

Dimensions

165L x 85W x 55H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Available with transparent or solid colour lid. PCB mounting points are moulded into the enclosure base.

Dimensions

145L x 105W x 45H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Available with transparent or solid colour lid. PCB mounting points are moulded into the enclosure base.

Dimensions

125L x 85W x 55H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Available with transparent or solid colour lid. PCB mounting points are moulded into the enclosure base.

Dimensions

105L x 75W x 55H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Available with transparent or solid colour lid. PCB mounting points are moulded into the enclosure base.

Dimensions

85L x 80W x 55H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Available with transparent or solid colour lid. PCB mounting points are moulded into the enclosure base.

Dimensions

105L x 75W x 40H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Available with transparent or solid colour lid. PCB mounting points are moulded into the enclosure base.

Dimensions

65L x 60W x 40H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Supplied with a solid light grey lid (also available with a transparent lid, see H 0333). These sturdy enclosures have 3mm thick walls and are rated to UL 94-HB (-30 to 80C). Not UV stabilised.

Features

• Meets IP65 Dust- and Hose-proof standards
• Brass screw thread inserts
• Neoprene gasket seal
• Moulded PCB mounting points
• Manufactured from high impact ABS
• Useable temperature range of -30C to +80C
• Available with a solid light grey lid or a polycarbonate clear lid (see 0333)
• 220L x 165W x 80H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Available with transparent or solid colour lid. PCB mounting points are moulded into the enclosure base.These sturdy enclosures have 3mm thick walls and are rated to UL 94V-0 (-40° to 75°C). Not UV stabilised.

Dimensions:

220L x 165W x 60H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Available with transparent or solid colour lid. PCB mounting points are moulded into the enclosure base.These sturdy enclosures have 3mm thick walls and are rated to UL 94V-0 (-40° to 75°C). Not UV stabilised.

Dimensions:

186L x 146W x 75H

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Available with transparent or solid colour lid. PCB mounting points are moulded into the enclosure base.

Dimensions

165L x 125W x 75H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Available with transparent or solid colour lid. PCB mounting points are moulded into the enclosure base.These sturdy enclosures have 3mm thick walls and are rated to UL 94V-0 (-40° to 75°C). Not UV stabilised.

Dimensions

145L x 105W x 65H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Available with transparent or solid colour lid. PCB mounting points are moulded into the enclosure base.

Dimensions

165L x 85W x 55H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Available with transparent or solid colour lid. PCB mounting points are moulded into the enclosure base.These sturdy enclosures have 3mm thick walls and are rated to UL 94V-0 (-40° to 75°C). Not UV stabilised.

Dimensions

145L x 105W x 45H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Available with transparent or solid colour lid. PCB mounting points are moulded into the enclosure base.

Dimensions

125L x 85W x 55H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Available with transparent or solid colour lid. PCB mounting points are moulded into the enclosure base.

Dimensions

105L x 75W x 55H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Available with transparent or solid colour lid. PCB mounting points are moulded into the enclosure base.

Dimensions

85L x 80W x 55H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Available with transparent or solid colour lid. PCB mounting points are moulded into the enclosure base.These sturdy enclosures have 3mm thick walls and are rated to UL 94V-0 (-40° to 75°C). Not UV stabilised.

Dimensions

105L x 75W x 40H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Available with transparent or solid colour lid. PCB mounting points are moulded into the enclosure base.These sturdy enclosures have 3mm thick walls and are rated to UL 94V-0 (-40° to 75°C). Not UV stabilised.

Dimensions

65L x 60W x 40H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Six PCB mounting points are moulded into the enclosure base. Lid incorporates a recess for a lexan panel. Ideal for industrial applications.

Dimensions: 250L x 200W x 130H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Six PCB mounting points are moulded into the enclosure base. Lid incorporates a recess for a lexan panel. Extra height for industrial type relays.

Dimensions

165L x 105W x 78H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Six PCB mounting points are moulded into the enclosure base. Lid incorporates a recess for a lexan panel. Extra height for industrial type relays.

Dimensions

165L x 105W x 78H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Six PCB mounting points are moulded into the enclosure base. Lid incorporates a recess for a lexan panel. Extra height for industrial type relays.

Dimensions

105L x 105W x 57H mm

Suits Ritec IP65 sealed enclosures. Mounting flange allows attachment to bulkheads without compromising the seal. Pack contains 4 feet and 4 self tapping screws.

Suits the following models:
H 0312A
H 0313
H 0332A
H 0333
H 0363
H 0364A

A stylish range of 4 piece snap together, low profile, instrument cases. Each case has four faces which may be customised with screen printing or lexan. Internal PCB mounting posts are provided. Suitable for both handheld or desktop use. UL 94-HB

200W x 114D x 40H

Batt Tecxus Alk D 2pk Card

A stylish range of 4 piece snap together, low profile, instrument cases. Each case has four faces which may be customised with screen printing or lexan. Internal PCB mounting posts are provided. Suitable for both handheld or desktop use. UL 94-HB

155W x 86D x 30H

A stylish range of 4 piece snap together, low profile, instrument cases. Each case has four faces which may be customised with screen printing or lexan. Internal PCB mounting posts are provided. Suitable for both handheld or desktop use. UL 94-HB

130W x 75D x 28H

Removable front & rear panels. Includes 4 PCB mounting posts on both lid & base.

Dimensions

190L x 140W x 50H mm

Removable front & rear panels. Includes 4 PCB mounting posts on both lid & base.

Dimensions

130L x 100W x 70H mm

Removable front & rear panels. Includes 4 PCB mounting posts on both lid & base.

Dimensions

130L x 100W x 50H mm

Supplied with neoprene lid sealing gasket and stainless steel fixing screws. With the seal installed, this enclosure meets IP65 dust and hose proof standard. Numerous PCB mounting points are moulded into the enclosure base. Lid incorporates a recess for a lexan panel. Extra height for industrial type relays, timers, switches, etc. Ideal for use in industrial environments, process control, etc.

Dimensions

186L x 146W x 110H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Numerous PCB mounting points are moulded into the enclosure base. Lid incorporates a recess for a lexan panel. Extra height for industrial type relays.

Dimensions

165L x 85W x 85H mm

Supplied with neoprene lid sealing gasket. With the seal installed, these enclosures meet IP65 dust and hose proof standard. Numerous PCB mounting points are moulded into the enclosure base. Lid incorporates a recess for a lexan panel. Extra height for industrial type relays.

Dimensions

125L x 85W x 85H mm

Black Alum. Panel for H 0480, H 0481

Batt Tecxus Alk C 2pk Card

Batt Tecxus Alk AAA 4pk Card

ABS PVC Panel for H 0482, H 0483

Batt Tecxus Alk AAA 10pk Card

Includes generous ventilation slots on both the top and bottom panels, a myriad of mounting posts for PCB mounting and "extra tough" mounting posts are included for securing transformers. Additional ventilation has also been provided for the mains transformer and power supply locality. Two colours available, grey case with grey panels (pictured), or black case with grey panels.

Includes generous ventilation slots on both the top and bottom panels, a myriad of mounting posts for PCB mounting and "extra tough" mounting posts for securing transformers. Additional ventilation has also been provided for the mains transformer and power supply locality. Two colours available, grey case with grey panels (pictured), or black case with grey panels.

Features:

• Designed to house amplifiers, inverters, power supplies, etc • Vented for efficient air-flow cooling • Extra tough, lightly textured finish front and rear panels • Dimensions: 355W x 250D x 122H mm

Includes generous ventilation slots on both the top and bottom panels, a myriad of mounting posts for PCB mounting and "extra tough" mounting posts are included for securing transformers. Additional ventilation has also been provided for the mains transformer and power supply locality. Two colours available, grey case with grey panels (pictured), or black case with grey panels.

Features:

• Designed to house amplifiers, inverters, power supplies, etc • Vented for efficient air-flow cooling • Extra tough, lightly textured finish front and rear panels • Dimensions: 355W x 250D x 122H mm

Batt Tecxus Alk AA 4pk Card

Batt Tecxus Alk AA 10pk Card

ABS PVC Panel for H 0482, H 0483

These stylish sloping front desk mount high impact ABS project enclosures are ideal for housing audio or video controllers, security systems, test equipment, control equipment, etc. They can be easily machined to suit custom applications. Both incorporate moulded posts in the base for mounting a PCB. They also include a recess for inlaying a lexan or aluminium face panel.

Dimensions

134W x 189D x 55H

These stylish sloping front desk mount high impact ABS project enclosures are ideal for housing audio or video controllers, security systems, test equipment, control equipment, etc. They can be easily machined to suit custom applications. Both incorporate moulded posts in the base for mounting a PCB. They also include a recess for inlaying a lexan or aluminium face panel.

Dimensions

189W x 134D x 55H

Batt Tecxus Alk 9V 1pk Card

This professional series features solid ABS screw-together construction, internal PCB guides and an attractive rounded finish. Larger sizes (H 0218, H 0220 & H 0222) include stick on rubber feet and brass screw inserts. Dust and moisture proof.

Dimensions

100W x 190D x 80H

This professional series features solid ABS screw-together construction, internal PCB guides and an attractive rounded finish. Larger sizes (H 0218, H 0220 & H 0222) include stick on rubber feet and brass screw inserts. Dust and moisture proof.

Dimensions

100W x 190D x 40H

This professional series features solid ABS screw-together construction, internal PCB guides and an attractive rounded finish. Larger sizes (H 0218, H 0220 & H 0222) include stick on rubber feet and brass screw inserts. Dust and moisture proof.

Dimensions

80W x 150D x 30H

This professional series features solid ABS screw-together construction, internal PCB guides and an attractive rounded finish. Larger sizes (H 0218, H 0220 & H 0222) include stick on rubber feet and brass screw inserts. Dust and moisture proof.

Dimensions

60W x 120D x 30H

This professional series features solid ABS screw-together construction, internal PCB guides and an attractive rounded finish. Larger sizes (H 0218, H 0220 & H 0222) include stick on rubber feet and brass screw inserts. Dust and moisture proof.

Dimensions

50W x 90D x 32H

This professional series features solid ABS screw-together construction, internal PCB guides and an attractive rounded finish. Larger sizes (H 0218, H 0220 & H 0222) include stick on rubber feet and brass screw inserts. Dust and moisture proof.

Dimensions

50W x 90D x 24H

This professional series features solid ABS screw-together construction, internal PCB guides and an attractive rounded finish. Larger sizes (H 0218, H 0220 & H 0222) include stick on rubber feet and brass screw inserts. Dust and moisture proof.

Dimensions

50W x 90D x 16H

Internal mounting posts enable a wide combination of PCB’s, or transformers etc to be accommodated. PCB guide rails internally allow vertical PCB positioning in several locations. Removable front and rear panels. Attractive textured finish one side and plain on the reverse side. Integral feet. Includes generous ventilation slots. Dimensions: H 0480F-H 0481F: 200W x 155D x 65H mm

Dimensions:

H 0482-H 0483: 250W x 190D x 80H mm

Internal mounting posts enable a wide combination of PCB’s, or transformers etc to be accommodated. PCB guide rails internally allow vertical PCB positioning in several locations. Removable front and rear panels. Attractive textured finish one side and plain on the reverse side. Integral feet. Includes generous ventilation slots. Dimensions: H 0480F-H 0481F: 200W x 155D x 65H mm

Dimensions:

H 0482-H 0483: 250W x 190D x 80H mm

Internal mounting posts enable a wide combination of PCB’s, or transformers etc to be accommodated. PCB guide rails internally allow vertical PCB positioning in several locations. Removable front and rear panels. Attractive textured finish one side and plain on the reverse side. Integral feet. Includes generous ventilation slots. Dimensions: H 0480F-H 0481F: 200W x 155D x 65H mm

Dimensions:

H 0480F-H 0481F: 200W x 155D x 65H mm

These moulded plastic cases are a two part design with a tongue and groove joint between the top and bottom sections. This, coupled with the custom front and rear panels, ensures a perfect fit for a very professional finish.

Features:

• Integral guide slots for mounting PCB’s • Moulded bosses or stand-offs for horizontal mounting of PCB’s • Made from high impact ABS • Both top and bottom sections are lightly textured which affords a non-scratch surface and maintains a high quality finish

All models supplied with black ABS front and rear panels with 1 side smooth (ideal for direct screen printing) and 1 side textured. H 0472 is assembled using 2 self tapping screws (supplied), H 0474 and H 0476 are assembled by using 4 x 3mm bolts fixed into moulded brass inserts.

Dimensions:

260W x 180D x 65H mm

These moulded plastic cases are a two part design with a tongue and groove joint between the top and bottom sections. This, coupled with the custom front and rear panels, ensures a perfect fit for a very professional finish.

Features

• Integral guide slots for mounting PCB’s • Moulded bosses or stand-offs for horizontal mounting of PCB’s • Made from high impact ABS • Both top and bottom sections are lightly textured which affords a non-scratch surface and maintains a high quality finish

All models supplied with black ABS front and rear panels with 1 side smooth (ideal for direct screen printing) and 1 side textured. H 0472 is assembled using 2 self tapping screws (supplied), H 0474 and H 0476 are assembled by using 4 x 3mm bolts fixed into moulded brass inserts.

Dimensions

225W x 165D x 40H mm

These moulded plastic cases are a two part design with a tongue and groove joint between the top and bottom sections. This, coupled with the custom front and rear panels, ensures a perfect fit for a very professional finish.

Features:

• Integral guide slots for mounting PCB’s • Moulded bosses or stand-offs for horizontal mounting of PCB’s • Made from high impact ABS • Both top and bottom sections are lightly textured which affords a non-scratch surface and maintains a high quality finish

All models supplied with black ABS front and rear panels with 1 side smooth (ideal for direct screen printing) and 1 side textured. H 0472 is assembled using 2 self tapping screws (supplied), H 0474 and H 0476 are assembled by using 4 x 3mm bolts fixed into moulded brass inserts.

Dimensions

140W x 110D x 35H mm

Heavy duty die cast boxes with flanged lid for easy mounting. They offer a high degree of RFI
shielding and are suitable for industrial or automotive use. Available in 6 different sizes for a multitude of applications. All flange and lid holes are countersunk.

Dimensions listed exclude flanges.

Heavy duty die cast boxes with flanged lid for easy mounting. They offer a high degree of RFI
shielding and are suitable for industrial or automotive use. Available in 6 different sizes for a multitude of applications. All flange and lid holes are countersunk.

Dimensions listed exclude flanges.

Heavy duty die cast boxes with flanged lid for easy mounting. They offer a high degree of RFI
shielding and are suitable for industrial or automotive use. Available in 6 different sizes for a multitude of applications. All flange and lid holes are countersunk.

Dimensions listed exclude flanges.

Heavy duty die cast boxes with flanged lid for easy mounting. They offer a high degree of RFI
shielding and are suitable for industrial or automotive use. Available in 6 different sizes for a multitude of applications. All flange and lid holes are countersunk.

Dimensions listed exclude flanges.

Heavy duty die cast boxes with flanged lid for easy mounting. They offer a high degree of RFI
shielding and are suitable for industrial or automotive use. Available in 6 different sizes for a multitude of applications. All flange and lid holes are countersunk.

Dimensions listed exclude flanges.

Heavy duty die cast boxes with flanged lid for easy mounting. They offer a high degree of RFI
shielding and are suitable for industrial or automotive use. Available in 6 different sizes for a multitude of applications. All flange and lid holes are countersunk.

Dimensions listed exclude flanges.

Industrial grade heavy duty die cast boxes with flanged base for easy mounting & access. Sealing gasket included achieving IP66 rating making them ideal for mining, industrial, agricultural and marine use. 7 sizes to choose from. Countersunk lid holes. Dimensions exclude flanges.

Dimensions:

222L x 146W x 55H mm

Industrial grade heavy duty die cast boxes with flanged base for easy mounting & access. Sealing gasket included achieving IP66 rating making them ideal for mining, industrial, agricultural and marine use. 7 sizes to choose from. Countersunk lid holes. Dimensions exclude flanges.

Dimensions:

171L x 121W x 55H mm

Industrial grade heavy duty die cast boxes with flanged base for easy mounting & access. Sealing gasket included achieving IP66 rating making them ideal for mining, industrial, agricultural and marine use. 7 sizes to choose from. Countersunk lid holes. Dimensions exclude flanges.

Dimensions:

120L x 100W x 35H mm

Industrial grade heavy duty die cast boxes with flanged base for easy mounting & access. Sealing gasket included achieving IP66 rating making them ideal for mining, industrial, agricultural and marine use. 7 sizes to choose from. Countersunk lid holes. Dimensions exclude flanges.

Dimensions:

114L x 90W x 55H mm

Industrial grade heavy duty die cast boxes with flanged base for easy mounting & access. Sealing gasket included achieving IP66 rating making them ideal for mining, industrial, agricultural and marine use. 7 sizes to choose from. Countersunk lid holes. Dimensions exclude flanges.

Dimensions:

114L x 64W x 55H mm

Industrial grade heavy duty die cast boxes with flanged base for easy mounting & access. Sealing gasket included achieving IP66 rating making them ideal for mining, industrial, agricultural and marine use. 7 sizes to choose from. Countersunk lid holes. Dimensions exclude flanges.

Dimensions:

114L x 64W x 30H mm

Flanged Diecast Aluminium Box - 89x35x30, IP66

Industrial grade heavy duty die cast boxes with flanged base for easy mounting and access. Sealing gasket included achieving IP66 rating making them ideal for mining, industrial, agricultural and marine use. 7 sizes to choose from. Countersunk lid holes. Dimensions exclude flanges.

Dimensions:
89L x 35W x 30H mm 

Manufactured from sturdy ABS plastic these boxes have a moulded PCB mounting design. Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs.

Dimensions

82L x 54W x 30Hmm

Manufactured from sturdy ABS plastic these boxes have a moulded PCB mounting design. Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs.

Dimensions

130 x 67 x 42

Manufactured from sturdy ABS plastic these boxes have a moulded PCB mounting design. Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs.

Dimensions

198 x 113 x 62

Manufactured from sturdy ABS plastic these boxes have a moulded PCB mounting design. Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs.

Dimensions

158 x 95 x 53

Manufactured from sturdy ABS plastic these boxes have a moulded PCB mounting design. Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs.

Dimensions

83 x 54 x 30

Manufactured from sturdy ABS plastic these boxes have a moulded PCB mounting design. Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs.

Dimensions

130 x 67 x 42

Manufactured from sturdy ABS plastic these boxes have a moulded PCB mounting design. Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs.

Dimensions

198 x 113 x 62

Manufactured from sturdy ABS plastic these boxes have a moulded PCB mounting design. Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs.

Dimensions

158 x 95 x 53

Manufactured from sturdy ABS plastic these boxes have a moulded PCB mounting design. Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs.

Dimensions

83 x 54 x 30

Manufactured from sturdy ABS plastic these boxes have a moulded PCB mounting design. Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs.

Dimensions

130 x 67 x 42

Manufactured from sturdy ABS plastic these boxes have a moulded PCB mounting design. Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs.

Dimensions

198 x 113 x 62

Manufactured from sturdy ABS plastic these boxes have a moulded PCB mounting design. Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs.

Dimensions

158 x 95 x 53

Manufactured from sturdy ABS plastic these boxes have a moulded PCB mounting design. Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs.

Dimensions

83 x 54 x 30

Manufactured from sturdy ABS plastic these boxes have a moulded PCB mounting design. Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs.

Dimensions

130 x 67 x 42

Manufactured from sturdy ABS plastic these boxes have a moulded PCB mounting design. Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs.

Dimensions

198 x 113 x 62

Manufactured from sturdy ABS plastic these boxes have a moulded PCB mounting design. Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs.

Dimensions

158 x 95 x 53

Compact plastic housing with mounting flanges.

Dimensions

67W x 112L x 36H. Overall length including mounting flanges 134mm.

Compact plastic housing with mounting flanges. Two models available.

Dimensions

66W x 85D x 31H. Overall length including mounting flanges 109mm. Includes 12mmØ cable entry hole

Compact plastic housing with mounting flanges.

Dimensions

86W x 55D x 33H. Overall length including mounting flanges 108mm. Includes 11mmØ cable entry hole.

Miniature boxes designed for wiring junctions, small circuits and relays. Ideal for use in automotive applications. Friction fit lid for quick assembly and easy access if required. Provided with 3 cable entries.

Dimensions:

H 0208: 70L x 42W x 27H mm. Overall length including mounting flanges 88mm.

Miniature boxes designed for wiring junctions, small circuits and relays. Ideal for use in automotive applications. Friction fit lid for quick assembly and easy access if required. Provided with 3 cable entries.

Dimensions:

H 0206: 64L x 36W x 21H mm. Overall length including mounting flanges 80mm.

This range of low cost ABS enclosures include mounting ears for surface mounting. In addition, they include a shallow recess on the base and lid to house a membrane or lexan panel. Moulded mounting posts are included in both the base and lid for securing PCBs.

This range of low cost ABS enclosures include mounting ears for surface mounting. In addition, they include a shallow recess on the base and lid to house a membrane or lexan panel. Moulded mounting posts are included in both the base and lid for securing PCBs.

This range of low cost ABS enclosures include mounting ears for surface mounting. In addition, they include a shallow recess on the base and lid to house a membrane or lexan panel. Moulded mounting posts are included in both the base and lid for securing PCBs.

This range of low cost ABS enclosures include mounting ears for surface mounting. In addition, they include a shallow recess on the base and lid to house a membrane or lexan panel. Moulded mounting posts are included in both the base and lid for securing PCBs.

This range of low cost ABS enclosures include mounting ears for surface mounting. In addition, they include a shallow recess on the base and lid to house a membrane or lexan panel. Moulded mounting posts are included in both the base and lid for securing PCBs.

This range of low cost ABS enclosures include mounting ears for surface mounting. In addition, they include a shallow recess on the base and lid to house a membrane or lexan panel. Moulded mounting posts are included in both the base and lid for securing PCBs.

This range of low cost ABS enclosures include mounting ears for surface mounting. In addition, they include a shallow recess on the base and lid to house a membrane or lexan panel. Moulded mounting posts are included in both the base and lid for securing PCBs.

Uses no screws for assembly, the two halves simply snap securely together. Manufactured from high-impact plastic with side vents and removable front and rear panels.

Dimensions

135L x 47H x 94W mm.

These sturdy boxes offer a high degree of RFI shielding. All models have inbuilt slots for accepting PCB’s. Incorporates internal raised lip for the lid to seal against.

Dimensions

188W x 112D x 60H

These sturdy boxes offer a high degree of RFI shielding. All models have inbuilt slots for accepting PCB’s. Incorporates internal raised lip for the lid to seal against.

Dimensions

119 x 94 x 35

These sturdy boxes offer a high degree of RFI shielding. All models have inbuilt slots for accepting PCB’s. Incorporates internal raised lip for the lid to seal against.

Dimensions

118W x 61D x 39H

These sturdy boxes offer a high degree of RFI shielding. All models have inbuilt slots for accepting PCB’s. Incorporates internal raised lip for the lid to seal against.

Dimensions

98W x 50D x 25H

Designed for encapsulating electronic circuits & connections for protection from ingress of moisture, dust, vermin etc. They can also help protect the integrity of your circuit design.
Available in 9 sizes to suit a wide range of applications. All dimensions listed are external sizes.

Temperature rating -20°C to 60°C.
Flammability UL-94HB.

Designed for encapsulating electronic circuits & connections for protection from ingress of moisture, dust, vermin etc. They can also help protect the integrity of your circuit design.


Temperature rating -20°C to 60°C.
Flammability UL-94HB.

Dimensions:

70L x 50W x35H mm

Designed for encapsulating electronic circuits & connections for protection from ingress of moisture, dust, vermin etc. They can also help protect the integrity of your circuit design.
Available in 9 sizes to suit a wide range of applications. All dimensions listed are external sizes.

Temperature rating -20°C to 60°C.
Flammability UL-94HB.

Designed for encapsulating electronic circuits & connections for protection from ingress of moisture, dust, vermin etc. They can also help protect the integrity of your circuit design.
Available in 9 sizes to suit a wide range of applications. All dimensions listed are external sizes.

Temperature rating -20°C to 60°C.
Flammability UL-94HB.

Designed for encapsulating electronic circuits & connections for protection from ingress of moisture, dust, vermin etc. They can also help protect the integrity of your circuit design.
Available in 9 sizes to suit a wide range of applications. All dimensions listed are external sizes.

Temperature rating -20°C to 60°C.
Flammability UL-94HB.

Designed for encapsulating electronic circuits & connections for protection from ingress of moisture, dust, vermin etc. They can also help protect the integrity of your circuit design.
Available in 9 sizes to suit a wide range of applications. All dimensions listed are external sizes.

Temperature rating -20°C to 60°C.
Flammability UL-94HB.

Designed for encapsulating electronic circuits & connections for protection from ingress of moisture, dust, vermin etc. They can also help protect the integrity of your circuit design.
Available in 9 sizes to suit a wide range of applications. All dimensions listed are external sizes.

Temperature rating -20°C to 60°C.
Flammability UL-94HB.

Designed for encapsulating electronic circuits & connections for protection from ingress of moisture, dust, vermin etc. They can also help protect the integrity of your circuit design.
Available in 9 sizes to suit a wide range of applications. All dimensions listed are external sizes.

Temperature rating -20°C to 60°C.
Flammability UL-94HB.

Designed for encapsulating electronic circuits & connections for protection from ingress of moisture, dust, vermin etc. They can also help protect the integrity of your circuit design.
Available in 9 sizes to suit a wide range of applications. All dimensions listed are external sizes.

Temperature rating -20°C to 60°C.
Flammability UL-94HB.

Designed for encapsulating electronic circuits & connections for protection from ingress of moisture, dust, vermin etc. They can also help protect the integrity of your circuit design.
Available in 9 sizes to suit a wide range of applications. All dimensions listed are external sizes.

Temperature rating -20°C to 60°C.
Flammability UL-94HB.

Designed for encapsulating electronic circuits & connections for protection from ingress of moisture, dust, vermin etc. They can also help protect the integrity of your circuit design.
Available in 9 sizes to suit a wide range of applications. All dimensions listed are external sizes.

Temperature rating -20°C to 60°C.
Flammability UL-94HB.

Black Anodised. Centre channel is wide enough to accept TO-3 devices. All 105W x 26H mm.

Specifications:

Length:300mm Thermal Res. :0.7°C/W

Black Anodised. Centre channel is wide enough to accept TO-3 devices. All 105W x 26H mm.

Specifications:

Length:225mm Thermal Res. :0.9°C/W

Black Anodised. Centre channel is wide enough to accept TO-3 devices. All 105W x 26H mm.

Specifications:

Length:135mm Thermal Res. :1.1°C/W

Black Anodised. Centre channel is wide enough to accept TO-3 devices. All 105W x 26H mm.

Specifications:

Length:72mm Thermal Res. :2.2°C/W

Black Anodised. Centre channel is wide enough to accept TO-3 devices. All 105W x 26H mm.

Specifications:

Length:55mm Thermal Res. :2.5°C/W

The base is constructed from aluminium for easy machining and finished in frosty silver. The lid is steel finished in black hammer tone and is provided with generous ventilation slots (except H 0497).

Dimensions

205W x 128D x 65H

K & W Part NO. C 853

To suit TO-126 or TO-220 flat pack semis. Thermal resistance: 19°C/W. Dimensions: 25W x 30H x 13D

To suit TO-126 or TO-220 flat pack semis. Thermal resistance: 28°C/W. Dimensions: 19W x 19L x 9.5H

A=13.3 B=9.6 L=19
L = Overall length
Thermal Res: 24°C/W

Suits flat packs semis. Thermal resistance: 10°C/W. Dimensions: 28W x 25L x 34H

Use with flat pack or TO-3 package. Thermal resistance: 6°C/W. Dimensions: 32W x 61L x 30H

Thermal resistance: 5°C/W
Dimensions: 50W x 50L x 25H

Black anodised. Incorporates a number of recessed “channels” on the flat side to enable self tapper screw fixing from chassis etc, without the need to drill holes. Other recesses are provided to mate with 1mm sheet metal thus allowing the construction of complete box enclosures with integral heatsinks with just four flat pieces of metal or aluminium. All 128W x 36Hmm.

Length: 300mm Thermal Res. :0.7°C/W

Black anodised. Incorporates a number of recessed “channels” on the flat side to enable self tapper screw fixing from chassis etc, without the need to drill holes. Other recesses are provided to mate with 1mm sheet metal thus allowing the construction of complete box enclosures with integral heatsinks with just four flat pieces of metal or aluminium. All 128W x 36Hmm.

Length: 250mm Thermal Res. :0.9°C/W

Black anodised. Incorporates a number of recessed “channels” on the flat side to enable self tapper screw fixing from chassis etc, without the need to drill holes. Other recesses are provided to mate with 1mm sheet metal thus allowing the construction of complete box enclosures with integral heatsinks with just four flat pieces of metal or aluminium. All 128W x 36Hmm.

Length:125mm Thermal Res. :1.2°C/W

Black anodised. Incorporates a number of recessed “channels” on the flat side to enable self tapper screw fixing from chassis etc, without the need to drill holes. Other recesses are provided to mate with 1mm sheet metal thus allowing the construction of complete box enclosures with integral heatsinks with just four flat pieces of metal or aluminium. All 128W x 36Hmm.

Length:100mm Thermal Res. :1.3°C/W

Black anodised. Incorporates a number of recessed “channels” on the flat side to enable self tapper screw fixing from chassis etc, without the need to drill holes. Other recesses are provided to mate with 1mm sheet metal thus allowing the construction of complete box enclosures with integral heatsinks with just four flat pieces of metal or aluminium. All 128W x 36Hmm.

Length:75mm Thermal Res. :1.4°C/W

Extruded matt black anodised heatsinks. Centre section is wide enough to mount TO-3 output devices.

Specifications:

Length:300mm Thermal Res. :1.5°C/W

Extruded matt black anodised heatsinks. Centre section is wide enough to mount TO-3 output devices.

Specifications:

Length:250mm Thermal Res. :1.6°C/W

Extruded matt black anodised heatsinks. Centre section is wide enough to mount TO-3 output devices.

Specifications:

Length:125mm Thermal Res. :2.2°C/W

Extruded matt black anodised heatsinks. Centre section is wide enough to mount TO-3 output devices.

Specifications:

Length:100mm Thermal Res. :2.6°C/W

Extruded matt black anodised heatsinks. Centre section is wide enough to mount TO-3 output devices.

Specifications:

Length:72mm Thermal Res. :2.9°C/W

Extruded matt black anodised heatsinks. Centre section is wide enough to mount TO-3 output devices.

Specifications:

Length:55mm Thermal Res. :3.4°C/W

This heatsink has tongue and grooved ends enabling ‘ganging’ of heatsinks together. All 110W x 33H mm

Specifications:

Length:100mm Thermal Res. :1.3°C/W

This heatsink has tongue and grooved ends enabling ganging of heatsinks together.
All 110W x 33H mm

• Length: 72mm
• Thermal Res. :2.2°C/W

Black anodised. Recesses are provided to mate with 1mm sheet metal thus allowing the construction of complete box enclosures with integral heatsinks. Includes tongue and groove ends enabling multiple heatsinks to be ganged together. Ideal for high powered amplifier chassis. All 150mm wide by 34mm high.

Specifications:

Length: 121mm Thermal Res. :1.0°C/W

Black anodised. Recesses are provided to mate with 1mm sheet metal thus allowing the construction of complete box enclosures with integral heatsinks. Includes tongue and groove ends enabling multiple heatsinks to be ganged together. Ideal for high powered amplifier chassis. All 150mm wide by 34mm high.

Specifications:

Length: 100mm Thermal Res. :1.1°C/W

Black anodised. Recesses are provided to mate with 1mm sheet metal thus allowing the construction of complete box enclosures with integral heatsinks. Includes tongue and groove ends enabling multiple heatsinks to be ganged together. Ideal for high powered amplifier chassis. All 150mm wide by 34mm high.

Specifications:

Length: 70mm Thermal Res. :1.2°C/W

Black anodised. Recesses are provided to mate with 1mm sheet metal thus allowing the construction of complete box enclosures with integral heatsinks. Includes tongue and groove ends enabling multiple heatsinks to be ganged together. Ideal for high powered amplifier chassis. All 150mm wide by 34mm high.

Specifications:

Length: 50mm Thermal Res. :1.6°C/W

Includes machined mounting surfaces for semiconductors. H 0535, H 0538 and H 0542 have 35mm wide by 6mm flange for semis or PCBs. H 0545 has a machined flat rear surface only. Fins are matte black.
H 0535, H 0538, H 0542 45D x 75H mm.
(not including flange)

H 0545 49D x 75H mm.

Length:300mm
Thermal Res. (80C): 0.37C/W

Includes machined mounting surfaces for semiconductors. H 0535, H 0538 and H 0542 have 35mm wide by 6mm flange for semis or PCB’s. H 0545 has a machined flat rear surface only. Fins are matt black. H 0535, H 0538, H 0542 45D x 75H mm. (not including flange) H 0545 49D x 75H mm.

Length:300mm Thermal Res. : 0.39°C/W

Includes machined mounting surfaces for semiconductors. H 0535, H 0538 and H 0542 have 35mm wide by 6mm flange for semis or PCB’s. H 0545 has a machined flat rear surface only. Fins are matt black. H 0535, H 0538, H 0542 45D x 75H mm. (not including flange) H 0545 49D x 75H mm.

Length: 200mm Thermal Res. : 0.60°C/W

Includes machined mounting surfaces for semiconductors. H 0535, H 0538 and H 0542 have 35mm wide by 6mm flange for semis or PCB’s. H 0545 has a machined flat rear surface only. Fins are matt black. H 0535, H 0538, H 0542 45D x 75H mm. (not including flange) H 0545 49D x 75H mm.

Length: 150mm Thermal Res. : 0.78°C/W

Use with TO-220 package transistors. Features base tabs for PCB location. Thermal resistance: 19°C/W. Dimensions: 25W x 30H x 13D

A=28 B=12.8 L=37
L = Overall length
Thermal Res: 15°C/W

Designed to be used with an 80mm cooling fan, which can be bolted to the holes at the end of the heatsink. Extremely effective for audio power amplifiers. Flat face on rear for mounting flat-pack output devices. All 80W x 50H mm.

Specifications:

Length:100mm Thermal Res. :1.13°C/W

Thermal Res: 5Deg.C/W

Suitable for flat pack semis up to TOP-3 size. Vertical mount. Includes 2 PCB pins. Thermal resistance: 7.25°C/W.

Thermal resistance: 7.25°C/W. Dimensions: 42W x 25L x 38H

Suitable for flat pack semis up to TOP-3 size. Vertical mount. Includes 2 PCB pins.

Height:50mm Thermal Res.:8.5 °C/W Dimensions:34W x 13L x 50H

Suitable for flat pack semis up to TOP-3 size. Vertical mount. Includes 2 PCB pins

Height:25mm Thermal Res.:17 °C/W Dimensions:34W x 13L x 25H

Length:16
Height:44
Width:16.5
°C/W: 8.5

Length:16
Height:22
Width:16.5
°C/W:19

Length:10
Height:44
Width:16.5
°C/W:15

Length:10
Height:22
Width:16.5
°C/W:30

This handy AC non contact tester is a great addition to any toolbox. It detects live AC voltages from 100V to 600V (50-60Hz). Easy operation allows detection of live wires without contact. Whenever AC is detected at a power point, sheathed or bare ended cable, the tester will light up red. This provides an instant indication of which cables or power outlets have lethal high AC voltages present. Operating with mains voltages without a tester such as this can be dangerous. An essential test tool for the electrical tradesperson, fitter, technician or anyone operating with AC power sources.

Compact design fits right in your pocket and includes handy LED light torch.

Features:

• AC Voltage detection without contact from 70-600VAC • DC polarity check 1.5V-36VDC • In-built LED light for working in dark areas • CAT III 1000V rated • Dimensions 176 x 26mmØ

An amazingly versatile piece of test equipment that couls save you hours in looking up transistor, diode and FET specifications!
Once you’ve used the Atlas Component Analyser, you’ll wonder how you ever did without it. It identifies semiconductors in seconds, allowing you to test their condition or find equivalent replacement devices easily & efficiently. It automatically identifies and analyses Bipolar & Darlington transistors, enhancement and depletion mode MOSFETs, J-Fets, triacs, thyristors, LEDs, bicolour LEDs, diodes and diode networks. Simply connect the test leads (in any order!) to the component and the Atlas will analyse the device and display the results on the scrollable multi-page display.
For example, connect a BC338 transistor to the leads, hit the “Test” button. The Atlas will identify it as an NPN bipolar transistor, tell you which of the red, green and blue test leads are connected to base, emitter and collector, display the hFE current gain (220), the collector test current used to obtain hFE, the Vbe base to emitter voltage (0.7V), the base test current and the collector leakage current (if any).

Diodes - identifies the anode and cathode of diodes and LEDs; displays Vf forward voltage & If forward current. In the case of a two-diode package, the Atlas will display whether the two diodes are connected in series or parallel, plus the anode and cathode pinouts in turn for each diode.

Bipolar Transistors - identifies base, collector & emitter pins; displays current gain hFE and Ic collector current used for the test; displays Vbe base-emitter voltage and base current used; displays Ic collector leakage current. Identifies Darlington pairs, transistors with shunt resistors between base & emitter and those with protection diodes between collector and emitter.

MOSFETs - detects whether N- or P-channel, enhancement or depletion mode; identifies gate, Drain and source pins; displays Vgs gate-source voltage and drain current used.

JFETs - detects whether N- or P-channel; identifies Gate pin.

SCRs and Triacs - detects whether device is SCR or Triac; identifies MT1, MT2 & gate terminals on a triac or gate, anode and cathode for SCR.

Testing continuity on long cable runs or wiring harnesses can be awkward - multimeter leads have a limited length! This compact handy device allows one-person continuity and polarity testing of two conductor cable runs using a base unit and remote LED. The base unit gives a visual and audible indication of continuity, whilst the colour of the LED (red or green), indicates the polarity of the cable under test. Comes complete with high quality silicon test leads and belt pouch. Uses a 9V battery.Quickly and easily check the continuity and polarity of multi-core cable runs! Handy for technicians & installers for PA, TV, security, communications & more!

Specifiications:

Applied test current: 20mA LED: Bicolour red/green Size: ≈ 68W x 105L x 29H mm

This compact cable tester allows quick and easy confirmation of cable conductivity from pin to pin. It is compatible with 6.35mm jack, 3/5/7/8 pin DIN, RCA, 3/5 pin XLR, S-Video, 3.5mm TRS, Speakon & Banana plugs. Constructed from a steel case it is built to withstand the rigours of professional PA use. An invaluable tool for checking leads in an instant. Requires 9V battery.

This compact cable tester allows quick and easy confirmation of cable conductivity from pin to pin. It is compatible with 6.35mm jack, 5 pin DIN, RCA, XLR, Speakon & Banana plugs. Constructed from a steel case it is built to withstand the rigours of professional PA use. An invaluable tool for checking leads in an instant. Requires 9V battery.

These optical adaptors allow conversion from Toslink (optical) to RCA Coaxial cable. Powered by 6V 250mA plugpack.

These optical adaptors allow conversion from Toslink (optical) to RCA Coaxial cable. Powered by 6V 250mA plugpack.

These optical adaptors allow conversion from Toslink (optical) to RCA Coaxial cable. Powered by 6V 250mA plugpack.

These optical adaptors allow conversion from Toslink (optical) to RCA Coaxial cable. Powered by 6V 250mA plugpack.

Many modern amplifiers are not equipped with a phono input. This preamp/selector allows you to connect a turntable to an existing line level input. Includes RIAA equalisation circuitry (for phono input).

Specifications:

Input sensitivity: 2.5mV Input impedance: 47kΩ @ 1kHz Output: 180mV Output Impedance: 47kΩ NOTE: Requires either a S4930 (9V battery), or M 9236 (9V DC adaptor) with M 9191 (DC Plug).

Enables 4 stereo audio inputs to be connected to 1 stereo input of an amplifier. eg. connect a VCR, CD, Tuner and Laser Disc to one input. Each input is selectable via the rotary switch on the front panel. Fitted with RCA connectors.

Allows one amplifier input to be switched between two line level sources, such as CD players or tape decks. A simple method of adding an extra line level input to your amplifier.

Suitable for switching multiple sets of speakers on a single amplifier eg: to switch between lounge and patio speakers.
Incorporates 4 independent stereo speaker switches. Allows selection of a combination of speakers, or all speakers on at once. Maintains correct impedance load for the amplifier
(4Ω minimum).

Suitable for switching multiple sets of speakers on a single amplifier eg: to switch between lounge and patio speakers.
Switches two sets of stereo speakers between one amplifier output. One speaker set may be selected or alternatively both speaker sets can be selected at once.

The LiDiC allows you to record from an external video source to a Beyonwiz DP-S1 or DP-P1 High Definition PVR in H.264 digital video format.

Attaching a LiDiC to the Beyonwiz PVR now offers a "complete solution" allowing users to utilise PVR functionality from virtually any AV source.

If you have a satellite, cable or pay TV box you can now connect them via your LiDiC to your Beyonwiz PVR and set timers to record your favourite shows thus allowing you to watch them at a more convenient time just like you would on a conventional VCR, except now you will be recording in high quality digital.

Now you can finally throw away your old videotapes! Simply connect your old VCR or camcorder to the LiDiC and transfer those old tapes & home videos to your Beyonwiz hard drive and watch them with a click of a button at anytime. Once on your Beyonwiz transferring videos to your PC or external HDD is effortless

Features:

Converting external video source to digital H.264 video format Recording external video source to Beyonwiz DP-S1 or P1 as H.264 video format Transferring H.264 video format to PC via Beyonwiz DP-S1 or P1 Time-shifting function for external video source with DP-S1 or P1 Timer recording for external video source with DP-S1 or P1

Specifications:

Analog Video input: Composite, S-Video Analog Audio input: Stereo RCA No. of Input Port: 2 Composite Video, 2 S-Video, 2 Stereo Audio Analog Video Output: Composite, S-Video Analog Audio Output: Stereo RCA Digital Video Format: H.264 [email protected] (576i) Digital Audio Output: AAC-LC (Stereo) Size: 150x150x45 mm Weight: 340g