8 Channel Public Address (PA) Mixer
This 8 channel mixer incorporates a variety of practical features ensuring suitability for a wide scope of PA and sound reinforcement applications. Features include: selectable phantom power for electret/condenser type microphones on each input, optional VOX muting of line programs, bass and treble controls (microphone channels can be routed through tone controls or bypassed as desired), individual level controls together with master level control. A 600O/0dBm XLR balanced line output is provided, enabling connection to a maximum of 16 power amplifiers.
Features
6 microphone and 2 line inputs
All mic inputs are 3 pin XLR balanced
Line inputs via twin RCA sockets
Separate bass and treble tone controls
Individual input and master volume controls
Optional VOX muting of line inputs
Optional phantom power for each mic input
Microphone bass cut internally selectable
Mic inputs routed via tone controls or bypassed
24VDC input
100% developed, designed &ssembled in Australia.
Since 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 45 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support. Read more about our Australian Made products
Backed by an industry leading 10 Year Manufacturer Warranty.
Our Redback products have a long tried and tested history of bulletproof reliability. Altronics offers a 10 Year Warranty on all Australian Made Redback products. Our local in-house service department has all the know how to answer technical queries and provide timely service. Read more about our industry leading warranty.
Specifications:
Auxiliary
No. of Channels: 2
Sensitivity (master full): 260mV
Signal to Noise Ratio: better than 76dB
Frequency Response (±3dB): 60Hz - 20kHz
Input Impedance: 100k Ohm
Muting Level: -50dB
Mode: Unbalanced
Connector Type: Stereo RCA
Tone Control
Bass Control: ±9dB at 80Hz
Treble Control: ±10dB at 10kHz
Bass Cut Switch on Microphone
Switch “ON”: -6dB/Octave from 150Hz
Phantom Power
Voltage: 12V
Output Impedance: 3.4k ohm
Microphone
No. of Channels: 6
Sensitivity (master full): 1.2mV
Signal to Noise Ratio: better than 71dB
Frequency Response (±3dB): 60Hz to 20kHz
Input Impedance: 600 Ohm
Mic Impedance: 200 - 600 Ohm nominal
Mode: Balanced
Connector Type: 3 Pin XLR Female
Output
Signal to Noise Ratio :
(all controls mid way) -85dB, ref 0dBm
(all controls maximum) -58dB, ref 0dBm
Impedance: 600 Ohms
Distortion: Less than 0.06%
Max Output Level: +19dBm
Mode: Balanced
Connector Type: 3 Pin XLR Male
*Specifications subject to change without notice.
*Specifications are subject to change without notice.
