A hard wired infra red target for use with the A 1040 Resi-Linx emitter hub. Suitable for use with flat screens.

A single eye IR emitter to suit resi-linx IR extension system (RL-IR305) and RF modulator range. Fitted with a 3.5mm mono headphone plug. Compatible with RF IR pass back systems (5V) and Hard Wired IR systems (12V)
 

A dual eye IR emitter to suit resi-linx IR extension system (RL-IR305) and RF modulator range. Fitted with a 3.5mm mono headphone plug. Compatible with RF IR pass back systems (5V) and Hard Wired IR systems (12V). 

Installed next to the TV screen, this device connects in-line between the TV screen and the A1058 splitter and enables full remote control of the connected AV sources through the A1051 via existing coaxial cable.

Installed next to the TV screen, this device connects in-line between the TV screen and the A1058 splitter and enables full remote control of the connected AV sources through the A1051 via existing coaxial cable.

Features:

• Sleek unobtrusive Flat IR Target for use with Vcomm’s RF IR Video Distribution System with IR modulator / video hub emitters. • Flexible flat cord allows for ease of placement of target. • Target plugs into compact in-line coaxial connector box using 3.5mm mini-jack • Light-weight Connector box has mounting brackets for ease of installation • To facilitate placement, adhesive backing is also included for both target and connector box. • Receives IR commands from remote controls and send the signals through the Video Hub and emitters to control the AV device at a remote location • Built-in LED to show acknowledgement of IR commands • Rejects interference from plasma displays that enters the IR signal line • Rejects interference from direct sunlight and fluorescent tube lights for accurate IR signal reception • Powered remotely by modulator (both connector box & target)

Specifications:

Max Target reception distance: Up to 6m Operating voltage: 5V Cable requirement: Coaxial Connector type: F IR frequency: 30 – 100kHz RF frequency: 50MHz~900MHz Size (mm) connector box: 70 x 40 x 23 Size (mm) flat target: 57 x 13 x 8

This multi-channel modulator and associated accessories allows the distribution of up to four audio/video signals from a variety of sources. This enables DVD, security camera, Pay TV, VCR etc to be transmitted over user assigned TV channels on a single RF cable. It uses a separate channel for each AV device input, combines these channels with your Free To Air TV channels, and routes the output to all television sets in the home via existing TV wall outlets. It allows the connected sources to be viewed at either four or eight locations simultaneously within the home, depending on the splitter used. Selecting the desired source is as simple as changing channels on your TVs. The system also allows full control of the AV devices remotely via the A 1055 IR (infra-red) extender modules. All RF connections on the system are made easy with industry standard F connectors.

Combines the output from the A 1051 and free to air TV antenna and splits the signal to multiple RF outputs. The units are powered via the RF cable when connected to the A 1051, but require a 12VDC 500mA plugpack (M 9272) when used as standalone splitters. The A 1061 is a
2 way splitter which expands the number of outputs of the A 1058 (up to a total of 8 outputs).

These multi-channel modulators and associated accessories allow the distribution of stereo audio/video signals from a variety of sources. They enable AV signals from DVD, security camera, Pay TV, VCR etc to be transmitted over a single 75O coaxial cable. Each AV input can be assigned its own dedicated TV channel. It allows the connected sources to be viewed at multiple locations simultaneously within the home, depending on the splitters used. Selecting the desired source is as simple as changing channels on your TV. The system also allows full control of the AV devices remotely via the A 1055 or A 1056 IR extender modules. All RF connections on the system are made easy with industry standard F connectors. Available in 2 or 4 channel models.

Output RF splitters: Combines the output from the A 1048/50 and free to air TV antenna and splits the signal to multiple RF outputs. The units are powered via the RF cable when connected to the A 1048/50, but require a 12VDC 500mA plugpack (M 9272) when used as standalone splitters.

The A 1061 is a 2 way splitter which expands the number of outputs of the A 1059. If infra-red is required in your system, it must include an A 1059 splitter.

Remote IR targets: Installed next to the TV screen. These devices connect in-line between the TV screen and the modulator/splitter and enables full remote control of the connected AV sources via the existing coaxial cable.

DC Blocking module: Required when connecting TV sets directly to the splitter module output without the use of the A 1055 IR target.

IR emitters: Connects to the A 1048/50 modulator to send control signals to the AV equipment. Single or dual “eye” versions available.

These multi-channel modulators and associated accessories allow the distribution of stereo audio/video signals from a variety of sources. They enable AV signals from DVD, security camera, Pay TV, VCR etc to be transmitted over a single 75O coaxial cable. Each AV input can be assigned its own dedicated TV channel. It allows the connected sources to be viewed at multiple locations simultaneously within the home, depending on the splitters used. Selecting the desired source is as simple as changing channels on your TV. The system also allows full control of the AV devices remotely via the A 1055 or A 1056 IR extender modules. All RF connections on the system are made easy with industry standard F connectors. Available in 2 or 4 channel models.

Output RF splitters: Combines the output from the A 1048/50 and free to air TV antenna and splits the signal to multiple RF outputs. The units are powered via the RF cable when connected to the A 1048/50, but require a 12VDC 500mA plugpack (M 9272) when used as standalone splitters.

The A 1061 is a 2 way splitter which expands the number of outputs of the A 1059. If infra-red is required in your system, it must include an A 1059 splitter.

Remote IR targets: Installed next to the TV screen. These devices connect in-line between the TV screen and the modulator/splitter and enables full remote control of the connected AV sources via the existing coaxial cable.

DC Blocking module: Required when connecting TV sets directly to the splitter module output without the use of the A 1055 IR target.

IR emitters: Connects to the A 1048/50 modulator to send control signals to the AV equipment. Single or dual “eye” versions available.

Required when connecting TV sets directly to the splitter module output without the use of the A 1055 IR target.

This infra red distribution system allows you to remotely control your AV equipment even when it is mounted inside a cabinet or located in another room.

Several components are required to build up a complete system

COMPONENTS
A 1074A Infra red hub: This is located with the AV equipment to be controlled. Accepts up to 4 IR emitters for sending control commands to the AV equipment.

A 1077/80 IR emitters: These plug into the A 1074A and are placed in close proximity of the equipment to be controlled. They relay the IR commands to the AV devices. Available in single or dual emitter configuration.

A 1075A Stick on target: This can be mounted as desired up to 5m from the AV equipment and relays the commands from your remote control to the A 1074A.

A 1076 Remote IR wallplate: This HPM Excel wallplate can be located remotely up to 20m away from the A 1074A, allowing full control of the equipment from another room.

Requires M 9271 12V 300mA DC plugpack.

This can be mounted as desired up to 5m from the AV equipment and relays the commands from your remote control to the A 1074A.

Designed to be placed on the front of a cupboard or wall unit. This then allows IR control of all audio source equipment inside the cupboard or wall unit.

Also suitable for use with the A 5030 Proart Matrix switcher.

This infra red distribution system allows you to remotely control AV equipment throughout your home via Cat5 cabling (we recommend W2759 cat5e cable). Typically the A 1074 hub would be located with the AV equipment and A1076 wall plates are installed in convenient locations eg: entertaining areas, lounge, theatre, games room etc. You can then use your standard remote control to send commands back to your AV equipment from anywhere a wallplate is located. A typical use would be in a home theatre system where the AV equipment is either behind you, in a remote location or in a wall cabinet. The infra-red wallplate is mounted at the front of the room providing easy control for all your AV devices. A maximum of 8 devices can be controlled from each A 1074 IR hub simply by using IR emitter leads (available separately). The A 1075 IR target allows you to place a remote control receiver at another location eg: kitchen or entertaining area.

This infra red distribution system allows you to remotely control AV equipment throughout your home via Cat5 cabling (we recommend W2759 cat5e cable). Typically the A 1074 hub would be located with the AV equipment and A1076 wall plates are installed in convenient locations eg: entertaining areas, lounge, theatre, games room etc. You can then use your standard remote control to send commands back to your AV equipment from anywhere a wallplate is located. A typical use would be in a home theatre system where the AV equipment is either behind you, in a remote location or in a wall cabinet. The infra-red wallplate is mounted at the front of the room providing easy control for all your AV devices. A maximum of 8 devices can be controlled from each A 1074 IR hub simply by using IR emitter leads (available separately). The A 1075 IR target allows you to place a remote control receiver at another location eg: kitchen or entertaining area.

These plug into the A 1074A and are placed in close proximity of the equipment to be controlled. They relay the IR commands to the AV devices. Dual emitter model

Also suitable for use with the A 5030 Proart Matrix Switcher.

IP54 gasket set for A1300/10/20 allows outdoor mounting.

"Emergency" replacement glass element to suit A 1310 (Picture)

Replacement glass element to suit A1300/10/20 (Picture)

"Door Release" replacement glass element to suit A 1320 (Picture)

Available in three models. Fire, Emergency and Door Release. They include a unique test key system enabling the unit to be tested without breaking the glass. Indoor use only.
Conforms to AS1603.5

Features

Easy to install Dual cable conduit entry Replaceable glass elements Key operated test function Monitored operation Complies with AS1603.5 1996 24VDC - 10A, 48VDC - 3A Size 88 x 88 x 55mm

Available in three models. Fire, Emergency and Door Release. They include a unique test key system enabling the unit to be tested without breaking the glass. Indoor use only.

Conforms to AS2220

Replacement test key for A1300/10/20

Designed to allow custom programming, tones, messages or music for use in interactive displays, security, customer entry and emergency evacuation announcements. When combined with a Redback® A 1706 timer it can play announcements at prescribed times for in-store advertising and customer notification. It allows up to 8 custom MP3 tracks plus standard alert and evacuation tones. A library of commonly used tones, messages and phrases are provided on a Secure Digital (SD) memory card. Custom MP3 tones, music etc may be added as desired. The SD card is preloaded with 8 standard tones, including bell, bing bong, siren and pre-announcement chime, plus Australian Standard alert and evacuation tones (complying to AS1670.4). To comply with Australian Standards for evacuation tones, a custom message may be played after every fourth cycle providing evacuation isntructions to patrons. Alert tones can be automatically switched to evacuation tones after a set period (adjustable between 30 and 240 seconds) Playback for each track can be activated by a closing set of contacts. Each contact may be configured between alternate or momentary action. This can include or exclude alert & evacuation tones as desired. Cancel contacts are provided to stop playback of tracks.

Features:

• Custom tracks • Inbuilt tone & phrase library • 12-24V DC operation @ 300mA • SD card included • Terminations via screw terminals • Tones conform to Australian standard • Provision for voice over in evac mode.

Designed to allow custom programming, tones, messages or music for use in interactive displays, security, customer entry and emergency evacuation announcements. When combined with the A 1706 timer it can play announcements at prescribed times for in store advertising and customer notification. It allows up to 8 custom MP3 tracks plus standard alert and evacuation tones. An SD (Secure Digital) card is provided with a library of commonly used tones, messages and phrases (this is upgradeable - new tracks will be available from our website). Custom MP3 tones, music etc can be added as desired. The SD card is preloaded with 8 standard tones, including bell, bing bong, siren and pre-announcement chime, plus Australian Standard alert and evacuation tones. The latter tones comply to AS1670.4. When the evac tone is operated, there is provision to insert a customised message as per Australian Standard requirements ie “evacuate as directed” after every fourth evac cycle. The on-board rotary switch allows the system to switch automatically from alert tone to evac tone after 30-240 seconds (in 30 second increments). Closing set of contacts required to operate each track. DIP switches allow you to switch between locking or momentary action of all remote trigger switches. Alert & evac tones may also be included or excluded depending on installation requirements. Cancel switch contacts are also included. Connections are via easy pluggable screw terminal blocks. 12-24V @ 300mA DC operation. Includes SD card.

Features:

• Custom tracks • Inbuilt tone & phrase library • 12-24V DC operation @ 300mA • SD card included • All connections made via screw terminals • Tones conform to Australian standard • Provision for voice over in evacuation mode • Compact size120 x 70mm

Straight forward to program and operate this digital display timer can be configured for up to 14 on/off cycles every 24 hours. Custom programming specific days will reduce the maximum available cycles for any one day. “On” duration is adjustable from 1 second to 23:59:59. Housed in 88mm 2 unit rack chassis this product is very handy for programming school periods, industrial plants, factories and the like. The clock programming can be set for Manual, Auto or Off modes.
Manual Mode: Any program setting can be manually overridden
Auto Mode: Programmed switching occurs at preset times.
Off: The preset programming is disabled. There are two modes of operation when the timer activates:
1. Bell chime tone generator provides a signal to PA amplifier (external). Four individual bell tones are available, these are user selectable at time of installation. Tones can be “one shot” or continuous as required.
2. 24VDC switched output provides external operation of ancillary devices eg: security lighting, air conditioning unit, water reticulation etc. In built lithium battery backup is provided ensuring program times are not lost during power failure.
Alert/evacuation tone generator: Standard building alert/evacuation switches are included on the front panel to provide signal to an external amplifier. Terminals are provided for remote tone/bell operation. Size 483W x 120D x 88H. 240VAC operation. Time clock switch contacts are rated at 8A 250VAC or 16A at 30VDC (resistive load).

Features:

Australian designed and assembled 10 Year Warranty

Ideal for PA systems requiring battery backup. The design incorporates a two stage high voltage SCR controlled charging circuit, providing protection against high voltage power line transients. Two stage battery charging minimises the risk of sulphation of the battery plates thus extending battery life, whereas single stage float charging limits yield to around 85%. In the event of 240V mains power failure the voltage sensing circuitry automatically disconnects from the battery thus preventing discharge back through the charger. This feature is especially important where charger power is removed for an extended period as the battery may discharge beyond recovery. For standby operation, the charger is connected to the batteries permanently. The circuitry ensures “boost voltage” is reached quickly minimising electrolyte gassing which greatly reduces battery life and performance, especially with sealed lead acid batteries. The power and sensing circuits are “opto coupler isolated” preventing harmful mains generated power transients.

Mains failure battery backup operation: With mains power failure the connected batteries are relay switched to the load via two 50A terminals. A sensing circuit disconnects the load when the minimum permissible discharge voltage is reached, thus preventing permanent battery damage. This charger has been specifically designed for use on sealed lead acid batteries, gel technology batteries and standard vented lead acid batteries.

Features:

2U 19" rack mount Short circuit protection Electronic reverse polarity protection 2 stage charging Automatic boost and float voltages Precision control of boost and float voltage settings Digital battery voltage display Charging indicator End of charge (battery ready) indicator 2 year warranty Suits sealed,vented lead acid and gel batteries Low battery cut off 2 switched 50A outputs Australian designed and manufactured 10 Year Warranty

Specifications:

Input Voltage: 240V AC 50Hz Boost Voltage: 29.4V DC Float Voltage: 27.6V DC Dimensions: 483W x 330D x 88H mm Weight: 8kg

Typical charge times:

24AH: 6Hrs, 40AH: 10Hrs* *Charging time is dependent on the ampere hour rating of the battery and its condition of charge.

?Ideal for PA systems requiring battery backup. The design incorporates a two stage high voltage SCR controlled charging circuit, providing protection against high voltage power line transients. Two stage battery charging minimises the risk of sulphation of the battery plates thus extending battery life, whereas single stage float charging limits yield to around 85%. In the event of 240V mains power failure the voltage sensing circuitry automatically disconnects from the battery thus preventing discharge back through the charger. This feature is especially important where charger power is removed for an extended period as the battery may discharge beyond recovery. For standby operation, the charger is connected to the batteries permanently. The circuitry ensures “boost voltage” is reached quickly minimising electrolyte gassing which greatly reduces battery life and performance, especially with sealed lead acid batteries. The power and sensing circuits are “opto coupler isolated” preventing harmful mains generated power transients.

Mains failure battery backup operation: With mains power failure the connected batteries are relay switched to the load via two 50A terminals. A sensing circuit disconnects the load when the minimum permissible discharge voltage is reached, thus preventing permanent battery damage. This charger has been specifically designed for use on sealed lead acid batteries, gel technology batteries and standard vented lead acid batteries.

Features

2U 19" rack mount Short circuit protection Electronic reverse polarity protection 2 stage charging Automatic boost and float voltages Precision control of boost and float voltage settings Digital battery voltage display Charging indicator End of charge (battery ready) indicator 2 year warranty Suits sealed,vented lead acid and gel batteries Low battery cut off 2 switched 50A outputs Australian designed and manufactured 10 Year Warranty

Specifications:

Input Voltage: 240V AC 50Hz Boost Voltage: 29.4V DC Float Voltage: 27.6V DC Dimensions: 483W x 330D x 88H mm Weight: 9kg

Typical charge times:

60AH: 8Hrs 80AH: 10Hrs 100AH: 12Hrs 120AH: 14Hrs* *Charging time is dependent on the ampere hour rating of the battery and its condition of charge.

Compact personal keychain alarm providing a 100dB distress call, loud enough to draw attention to yourself. Featuring a mini LED flashlight and keychain. Batteries included.

Suitable for flammable liquids and electrical fires. An essential item that no home or car can afford to be without. Simple operation means you can simply point and pull the trigger. Featuring dry powder retardant, lightweight aluminium body, pressure gauge and an extensive 6 year warranty. Complies to Australian standards. 1A:10B:E

Maximum switching power: 1000W
Transmission frequency: 433.92MHz
Operating range: 20m

Allows remote control of just about any appliance in the home! This 8 channel mains switching package is suitable for switching up to 1000W. This makes it perfect for automating devices around the home at the touch of a button. Extra mains switches are available allowing up to 8 mains outlets to be controlled remotely. The RF signal used means you don't even need to be in line-of-sight to the outlet unlike some infra-red models available on the market. Please check power consumption of your appliances before making your purchase.

Comes supplied with a transmitter (front door button) and receiver (chime generator & speaker). No wires or messy cables required. This totally portable unit will transmit up to 70 metres. Choice of two chime tones. Front door button features a name tag insert for identification. Ideal for large homes, garages, gardens or offices. 100dB speaker.

Smart tiimer can be used when you go on holiday to make it appear as if someone is living in your house. Press record on the front to store information about when you switch your appliance on and off. When you go away, switch it to play mode and your lights will automatically switch on and off at the same times you would normally use them.

Sets up in just minutes and requires no tedious setting up of operation periods.

Weekday and Weekend Timer. Has a 7 day cycle which allows different switching times for each day of the week, with up to 7 on and off settings per day. Perfect for controlling office appliances such as the coffee machine or photocopier during the week.

The Holiday Set 'n' Go Timer randomly turns on and off during the day and night to give your home that 'lived in' appearance to outsiders. Switches 2 or 3 times daily in late PM and early AM. On/off times vary each day and the timing function may be overridden if desired. No programming required!

Automatically turns on appliances when the sun sets. Set the timer to stay on from dusk for a set number of hours, or until dawn. Ideal for security lighting, heaters, garden lights etc.

Automatically turn on lighting while you are on holiday!

Australia / NZ To UK Travel Power Adapter

On your next holiday don't forget a travel adaptor to keep you devices fully charged while you're away. This travel adapter is most commonly used in the following countries: Great Britain, Ireland, Singapore, Hong Kong, Middle East (parts), Asia and Africa.

Certified adapter for Australia / NZ (Type I) to UK (Type G) plug conversion.

Note: This product does not convert voltage. Ensure that the appliance you are plugging into the wall is suitable for the voltage at your destination.

Power Rating: 220V - 240VAC
Power Handling: 2400W
Max. Load Current: 10AMP
WARNING: This adapter does NOT convert voltages. For use with 240VAC only.
*Specifications are subject to change without notice. 

Australia / NZ To Europe and Bali Travel Power Adapter

On your next holiday don't forget a travel power adaptor to keep you devices fully charged while you're away. This travel adapter is most commonly used in the following countries:
Albania - Armenia - Austria - Belgium - Bosnia and Herzegovina - Bulgaria - Croatia Czech Republic - Denmark - Egypt - Estonia - Finland - France - Germany - Greece Greenland - Hungary - Iceland - Indonesia (including Bali) - Iran - Italy - Lithuania - Luxembourg Macedonia - Morocco - Mozambique - Netherlands - New Caledonia - Norway - Poland Portugal - Romania - Russia - Serbia - Slovakia - Slovenia - South Korea - Spain Sweden - Turkey - Ukraine - Uruguay + More

Certified adapter for Australia / NZ (Type I) to EU (Type F) plug conversion.

Note: This product does not convert voltage. Ensure that the appliance you are plugging into the wall is suitable for the voltage at your destination.

Please Note: In some countries, older style houses may use smaller mains sockets and therefore this adapter may not be suitable due to pin diameter - see specifications below.

Power Rating: 220V - 240VAC
Power Handling: 2400W
Max. Load Current: 10AMP
Pin diameter: 4.76mm per pin
WARNING: This adapter does NOT convert voltages. For use with 240VAC only.
*Specifications are subject to change without notice. 

Australia / NZ To US Travel Power Adapter

On your next holiday don't forget a travel adaptor to keep your devices fully charged while you're away. This travel adapter is most commonly used in the following countries: United States of America and Canada.

Certified adapter for Australia / NZ (Type I) to USA (Type B - earthed) plug conversion.

Note: This product does not convert voltage. Ensure that the appliance you are plugging into the wall is suitable for the voltage at your destination.

Power Rating: 220V - 240VAC
Power Handling: 2400W
Max. Load Current: 10AMP
WARNING: This adapter does NOT convert voltages. For use with 240VAC only.
*Specifications are subject to change without notice. 

Multi Reverse Adapter- Worldwide To Australia / NZ

KEEP YOUR BATTERIES IN PEAK CONDITION!
This smart charger automatically discharges, then charges either NiCad or Nickel Metal Hydride batteries, prolonging battery life. Charging times depends on the battery size and rated capacity.

Features

• Simple and easy to use • Charges up to 4 batteries at a time • Charge and Discharge LED Indicators • Includes automatic discharge then recharge function • 240V Operation • Suitable for AAA, AA, C, D, 9V batteries

Note: No discharge feature for 9V batteries

Lithium Ion ∓ NiMh and NiCAD  USB Battery Charger

Shipping Weight: 0.09750Kg

Super fast fan cooled 30 minute NiCad and NiMH battery charging from your car accessory socket or 2A suitable plugpack! Suitable for up to four AAA or AA cells, or a combination of both sizes. Each cell has a dual colour LED status indicator showing the state of charge ie: fast or trickle charge. Great for keeping batteries charged when you are miles away from a mains socket!
12V DC operation, includes car accessory socket lead.

Requires M 8987A plugpack for use with 240V AC mains 

Super fast 1 hour NiCad and NiMH battery charging from your car accessory socket or 2A suitable
plugpack! Suitable for up to four AAA or AA cells, or a combination of both sizes. Each cell has a dual colour LED status indicator showing the state of charge ie: fast or trickle charge. Great for keeping batteries charged when you are miles away from a mains socket!
12V DC operation, includes car accessory socket lead.

Requires M 8934 plugpack & M 9187 adaptor for use with 240V AC mains socket.

Accepts up to 10 x AA or AAA and 2 x 9V batteries for overnight charging. Includes discharge function for optimum battery performance. Only suitable for charging same size and make of battery at one time. Great for home or in-car use.

Features:

• Suitable for AA, AAA or 9V batteries • Discharge function • Includes power supply and car accessory plug adaptor • Switches to trickle charge automatically once cells reach max charge