Edifier Airpulse A300 Premium Hi-Res active speakers
Overview
Active Bookshelf Speaker - Hi-Res Audio
Certified
The A300 speakers combine the quality of a reference monitor and retro wood
styling into an active bookshelf speaker. Simplicity married to quality is our
motto with AirPulse. Connect the speakers to each other with the connecting
cable and connect the speaker to your audio source directly with included
cables. These speakers are sold in pairs out of the box and includes a
remote.
65mm Aluminum Ribbon Tweeter
The A300 uses a thin aluminum horn loaded ribbon tweeter which extends
frequency range and a well-defined resolution reaching to 40KHz high
frequencies. The horn shape adds to a three-dimensional sound as the ribbon
tweeter is aimed at the listener and minimizes unwanted effects from room
reflection.
6.5-Inch Aluminum Mid-Woofer
The A300 active bookshelf speaker is equipped with a 6.5-inch aluminum alloy
cone mid-range woofer unit. Each magnet has a 50mm diameter edge-wound copper
clad aluminum ribbon voice coil for maximum linear excursion and
control.
ST300 Stands
Elevate your experience with the ST300 speaker stands from AirPulse. Made
exclusively with the A300 active bookshelf speakers in mind.
DESIGN
AirPulses A300 is designed by Phil Jones. The technical and aesthetic designs
are combined to create a next generation of audio. The cabinets are made from
25mm MDF and finished with a cherry wood veneer finished in satin lacquer. The
cabinet is lined with a 36mm professional-grade sound absorption material
reducing unwanted resonance.
Built-in Amplifier and Receiver Components
The built-in amplifier uses 3 parts of the TAS5754 Class-D amplifier chipset
from Texas Instrument. Two chips are bridged in parallel driving the left and
right woofers. Meanwhile, the third chip is set in bridge mode for both
tweeters.
Digital Audio Inputs
The SPDIF receiver uses a PCM 9211 from Texas Instrument that supports up to
216KHz input with a low output audio signal delivered to the XMOS processor with
zero loss. The USB audio interface supports UAC2 audio with input sample rate of
192KHz avoiding signal degradation and dynamic range loss via the PC audio
DAC.
Remote Control
Included with the pair of speakers is a wireless remote that allows you to
switch between inputs adjust volume and mute your speakers from a distance.
Back Panel & Inputs
Connect your phone, laptop, computer and other devices with the following
inputs. AUX, RCA, optical, coaxial, USB, professional balanced input, and
Bluetooth. The Bluetooth input uses version 5.0 and has support for aptX codec.
Bass, treble and volume controls are located on the back panel.
Specifications
TWEETER
UNIT |
Horn
Loaded Ribbon Tweeter |
MID-WOOFER
|
6.5inch
Aluminum Cone Underhung Design Neo. Power
Mid-Woofer |
AMPLIFIER
SYSTEM |
Digtal
Amplifer With Xmos Processor |
TOTAL
POWER OUTPUT |
L/R(Treble):10W+10W,
L/R(Woofer): 70W+70W |
FREQUENCY
RANGE |
40Hz-40KHz |
SIGNAL-TO-NOISE
RATIO |
L/R:90dB(A) |
INPUT
TYPE |
AUX,
Balance Input, USB, Optical, Coaxial,
Bluetooth. |
INPUT
SENSITIVITY |
AUX:70050mV
Balance:115050mV, USB:55050mFFs, Optical:50050mFFs
Coaxial:50050mFFs |
MAINS
VOLTAGE |
100-240
V AC/50-60 Hz |
CABINET
SIZE |
225
x 385 x 340mm |
NET
WEIGHT |
24kg
(53lbs) |
WEIGHT
|
29Kg
(64lbs) |