Wera 5PC Lasertip Set & Voltage Tester

Features

• Screwdriver and AC Voltage Detector kit
• Individually tested screwdriver blades to IEC60900:2004
• Suitable for slotted and phillips head
• Voltage detector - CATIII 600V Voltage proximity sensor
• Bonus pencil case and bottle opener included

Package Contents

• WERA671271Empty Pencil Case (Zip Pouch)
• WERA130008Bottle Opener
• WERA006110160I VDE Insulated Sotted Screwdriver 0.6X3.5X100
• WERA006115160I VDE Insulated Sotted Screwdriver 0.8X4.0X100
• WERA006121160I VDE Insulated Sotted Screwdriver 1.0X5.5X125
• WERA006152162I VDE Insulated Phillips Head Screwdriver 1X80
• WERA006154162I VDE Insulated Phillips Head Screwdriver 2X100
• C8902AAC Voltage (NCV) Detector ADJ CATIII 600

Wera Kraftform Kompakt 80 Vario Handle - 6x98mm

Features

• Kraftform Kompakt Vario without ratchet function
• Application: 6mm Vario double ended blades and adaptors
• 867/1 TZ TORX Bits: TX6 to TX30
• Non-roll Kraftform handle
• Multi-component with 10mm bolster

Deco HVG10 High Voltage Gloves - Size 11, 1000V

Features

• Made from natural rubber specifically formulated to ensure high dielectric properties
• Available in sizes 9-11

Deco HVG10 High Voltage Gloves - Size 9, 1000V

Features

• Made from natural rubber specifically formulated to ensure high dielectric properties
• Available in sizes 9-11

Deco HVG10 High Voltage Gloves - Size 10, 1000V

Features

• Made from natural rubber specifically formulated to ensure high dielectric properties
• Available in sizes 9-11

Deco 360MM LV Insulating Gloves - Size 9.5

Features

• Deco 650V AS2225 approved working gloves insulated for working at up to 650V
• Colour: Orange
• Various sizes available

LV Insulating Gloves 360MM 650V

Tested to 5kV

Sizing Guide - Rubber Gloves

Glove sizing is imperative to ensure you maintain good feel and dexterity. Use the following guide to choose the right size for you.

Knuckle Circumference / Size:

• 20.3cm / 8
• 22.9cm / 9
• 25.4cm / 10
• 27.9cm / 11

Deco 360MM LV Insulating Gloves - Size 9

Features

• Deco 650V AS2225 approved working gloves insulated for working at up to 650V
• Colour: Orange
• Various sizes available

LV Insulating Gloves 360MM 650V

Tested to 5kV

Sizing Guide - Rubber Gloves

Glove sizing is imperative to ensure you maintain good feel and dexterity. Use the following guide to choose the right size for you.

Knuckle Circumference / Size:

• 20.3cm / 8
• 22.9cm / 9
• 25.4cm / 10
• 27.9cm / 11

Deco 360MM LV Insulating Gloves - Size 8

Features

• Deco 650V AS2225 approved working gloves insulated for working at up to 650V
• Colour: Orange
• Various sizes available

LV Insulating Gloves 360MM 650V

Tested to 5kV

Sizing Guide - Rubber Gloves

Glove sizing is imperative to ensure you maintain good feel and dexterity. Use the following guide to choose the right size for you.

Knuckle Circumference / Size:

• 20.3cm / 8
• 22.9cm / 9
• 25.4cm / 10
• 27.9cm / 11

Deco 360MM LV Insulating Gloves - Size 11

Features

• Deco 650V AS2225 approved working gloves insulated for working at up to 650V
• Colour: Orange
• Various sizes available

LV Insulating Gloves 360MM 650V

Tested to 5kV

Sizing Guide - Rubber Gloves

Glove sizing is imperative to ensure you maintain good feel and dexterity. Use the following guide to choose the right size for you.

Knuckle Circumference / Size:

• 20.3cm / 8
• 22.9cm / 9
• 25.4cm / 10
• 27.9cm / 11

Deco 360MM LV Insulating Gloves - Size 10

Features

• Deco 650V AS2225 approved working gloves insulated for working at up to 650V
• Colour: Orange
• Various sizes available

LV Insulating Gloves 360MM 650V

Tested to 5kV

Sizing Guide - Rubber Gloves

Glove sizing is imperative to ensure you maintain good feel and dexterity. Use the following guide to choose the right size for you.

Knuckle Circumference / Size:

• 20.3cm / 8
• 22.9cm / 9
• 25.4cm / 10
• 27.9cm / 11

Dehn ARC Flash Gloves - Size 12, Extra Extra Large

Features

• Complex leather, Kevlar and rubber construction - the leading hand protection on the market
• Rated to 45cal/cm2 on the back of hand and 32.8cal/cm2 on palm
• This glove does not provide protection from electric shock
• Great feel and dexterity

Overview

Arc Flash PPE

An arc fault happens when electric current flows through air gaps between conductors. Arc flashes often occur when racking in a breaker, performing switching, Insulation failure, accidents caused by touching a test probe to the wrong surface or slipped (non-insulated) tools.

In its most basic form, an arc is made up of four elements:

• Thermal energy (heat)
• Acoustical energy (sound)
• Pressure wave and debris

Each of these elements can cause serious injury or death to a person.

Arc Flash Gloves

• Arc Flash gloves
• Cat 4 NFPA (45cal/cm2) - Back of Hand
• Cat 3 NFPA (32.8cal/cm2) - Palm

Dehn ARC Flash Gloves - Size 11, Extra Large

Features

• Complex leather, Kevlar and rubber construction - the leading hand protection on the market
• Rated to 45cal/cm2 on the back of hand and 32.8cal/cm2 on palm
• This glove does not provide protection from electric shock
• Great feel and dexterity

Overview

Arc Flash PPE

An arc fault happens when electric current flows through air gaps between conductors. Arc flashes often occur when racking in a breaker, performing switching, Insulation failure, accidents caused by touching a test probe to the wrong surface or slipped (non-insulated) tools.

In its most basic form, an arc is made up of four elements:

• Thermal energy (heat)
• Acoustical energy (sound)
• Pressure wave and debris

Each of these elements can cause serious injury or death to a person.

Arc Flash Gloves

• Arc Flash gloves
• Cat 4 NFPA (45cal/cm2) - Back of Hand
• Cat 3 NFPA (32.8cal/cm2) - Palm

Dehn ARC Flash Gloves - Size 10, Large

Features

• Complex leather, Kevlar and rubber construction - the leading hand protection on the market
• Rated to 45cal/cm2 on the back of hand and 32.8cal/cm2 on palm
• This glove does not provide protection from electric shock
• Great feel and dexterity

Overview

Arc Flash PPE

An arc fault happens when electric current flows through air gaps between conductors. Arc flashes often occur when racking in a breaker, performing switching, Insulation failure, accidents caused by touching a test probe to the wrong surface or slipped (non-insulated) tools.

In its most basic form, an arc is made up of four elements:

• Thermal energy (heat)
• Acoustical energy (sound)
• Pressure wave and debris

Each of these elements can cause serious injury or death to a person.

Arc Flash Gloves

• Arc Flash gloves
• Cat 4 NFPA (45cal/cm2) - Back of Hand
• Cat 3 NFPA (32.8cal/cm2) - Palm

Dehn ARC Flash Gloves - Size 9, Medium

Features

• Complex leather, Kevlar and rubber construction - the leading hand protection on the market
• Rated to 45cal/cm2 on the back of hand and 32.8cal/cm2 on palm
• This glove does not provide protection from electric shock
• Great feel and dexterity

Overview

Arc Flash PPE

An arc fault happens when electric current flows through air gaps between conductors. Arc flashes often occur when racking in a breaker, performing switching, Insulation failure, accidents caused by touching a test probe to the wrong surface or slipped (non-insulated) tools.

In its most basic form, an arc is made up of four elements:

• Thermal energy (heat)
• Acoustical energy (sound)
• Pressure wave and debris

Each of these elements can cause serious injury or death to a person.

Arc Flash Gloves

• Arc Flash gloves
• Cat 4 NFPA (45cal/cm2) - Back of Hand
• Cat 3 NFPA (32.8cal/cm2) - Palm

Dehn ARC Flash Gloves - Size 8, Small

Features

• Complex leather, Kevlar and rubber construction - the leading hand protection on the market
• Rated to 45cal/cm2 on the back of hand and 32.8cal/cm2 on palm
• This glove does not provide protection from electric shock
• Great feel and dexterity

Overview

Arc Flash PPE

An arc fault happens when electric current flows through air gaps between conductors. Arc flashes often occur when racking in a breaker, performing switching, Insulation failure, accidents caused by touching a test probe to the wrong surface or slipped (non-insulated) tools.

In its most basic form, an arc is made up of four elements:

• Thermal energy (heat)
• Acoustical energy (sound)
• Pressure wave and debris

Each of these elements can cause serious injury or death to a person.

Arc Flash Gloves

• Arc Flash gloves
• Cat 4 NFPA (45cal/cm2) - Back of Hand
• Cat 3 NFPA (32.8cal/cm2) - Palm

Wera//Irwin PG-2 Kit

Features

• Twin pack 3248 and 3238 215mm insulated lineman's pliers and insulated cutting pliers
• Wera 160IS T3 slimline 5-piece screwdriver set
• Irwin electricians apron and belt
• Voltfinger with torch CATIII 600V

Kit Contains

Wera 8780 C Kraftform Koloss SB 8002C Centring Pin - 135mm

Features

• 8781 C Kraftform Koloss centering pin
• Tempered Cr-Mo steel to strengthen tool
• Increases torque transfer
• Used to align lugs or drill holes
• Length: 135mm

Wera 8780 C Kraftform Koloss Extension

Features

• 8780 C Kraftform Koloss extension for Wera Koloss 8002 C
• Tempered Cr-Mo steel to strengthen tool
• Multi-component, laser engraved
• Length: 341mm
• Includes safety instructions for guidance

Wera 8002 C Koloss Ratchet - 1/2" Drive

Features

• Ratchet function for 1/2 inch square sockets adapters
• Equipped with ball lock, hammer function to align work piece
• Push-through square drive for forward and reverse operation
• Fine-tooth ratchet mechanism
• Small return angle of 6 degrees

Wera 8001 A Kraftform Zyklop Mini 1 Bit Ratchet - 1/4" Drive

Features

• 8001 A Kraftform Zyklop mini 1 bit ratchet
• Suitable for DIN ISO 1173-C 6.3 and DIN ISO 1173-E 6.3
• Forged full Steel, fine tooth ratchet with 1x bit
• 1/4 inch tip with friction ball for manual nut spin sockets
• Length: 87mm

Wera 851/4 Classic Bit PH2 - 5-Pack

Torsion-style design to reduce premature wear, tough, ideal for difficult screwdriving jobs e.g. in sheet steel or metal .

Features

• Torsion-style design to reduce premature wear
• Tough, ideal for difficult jobs
• 1/4inch hexagon
• Suitable for DIN 3126-F 6.3, ISO 1173 bit holders
• Used on sheet steel or metals

Specifications

Wera 851/1 Classic Phillips Head Bit - 2x25mm, 10-Pack

Torsion-style design to reduce premature wear, tough, ideal for difficult screwdriving jobs e.g. in sheet steel or metal .

Features

• 851/1 IMP DC Impaktor bit for phillips socket screws
• Suitable for DIN ISO 1173-D 6.3 bit holders
• Impaktor is diamond-coated for longer service life
• Colour-coded yellow by socket type, PH 2 phillips tip
• Length: 25mm

Specifications

Wera 3840/4 Stainless Steel Hexagon Bit - 6.0x89mm

Features

• 3840/4 Stainless steel hexagon bit
• Suitable for DIN ISO 1173-D 6.3 bit holders
• Made of stainless steel to prevent rusting - for socket screws
• Hexagonal 6mm tip
• Length: 89mm

Wera 869/4 M Magnetic Nutsetter - 13x50mm

Features

• 869/4 M magnetic nutsetters
• Suitable for DIN ISO 1173-D 6.3 bit holders
• Hexagonal 8mm tip
• Length: 50mm

Wera 869/4 M Magnetic Nutsetter - 12x50mm

Features

• 869/4 M magnetic nutsetters
• Suitable for DIN ISO 1173-D 6.3 bit holders
• Hexagonal 8mm tip
• Length: 50mm

Wera 869/4 M Magnetic Nutsetter - 10x50mm

Features

• 869/4 M magnetic nutsetters
• Suitable for DIN ISO 1173-D 6.3 bit holders
• Hexagonal 8mm tip
• Length: 50mm

Wera 869/4 M Magnetic Nutsetter - 8x50mm

Features

• Suitable for DIN ISO 1173-D 6.3 bit holders
• Hexagonal 8mm tip
• 869/4 M magnetic nutsetters
• Length: 50mm

Wera 8796 SA SB Zyklop Square Flexible-Lock Extension - 1/4"

Features

• 8796 SA Zyklop 1/4 inch square flexible-lock extension
• Flexible-lock for permanent lock or fast change of accessories
• Free-turn sleeve for rapid tightening or loosening of screws
• Suitable for square drive sockets with ball lock
• Material: Chrome vanadium, brushed chrome-plated finish

Wera 8796 LA SB Zyklop Flexible-Lock Extension - 3/8"

Features

• 8796 LA Zyklop 3/8 inch square flexible-lock extension
• Flexible-lock for permanent lock or fast change of accessories
• Free-turn sleeve for rapid tightening or loosening of screws
• Suitable for square drive sockets with ball lock
• Material: Chrome vanadium, brushed chrome-plated finish

Wera 8000 A SB Zyklop Speed Ratchet - 1/4" Drive

Features

• 8000 A SB Zyklop speed ratchet with 1/4 inch drive
• Suitable for 1/4 inch square sockets and drive adapters
• Defined lock positions with push-button release
• Kraftform handle, swivel ratchet head and free turning sleeve
• Length: 152mm

Wera 855/4 TH Torsion Bit PZ - 2x50mm

Features

• 840/1 Z 3mm bit suitable for hexagon socket screws
• Suitable for DIN ISO 1173-D 6.3 bit holders
• Hex-Plus tough for universal usage
• Hexagonal 3mm bit
• Length: 25mm

Wera 1165I VDE Insulated Pozidrov Screwdriver - 0x80mm

Features

• Suitable for pozidrov screws
• Insulated blade individually tested as per IEC 60900 : 2004
• Handle has non-roll feature, multi-component

Specifications

• Blade: Insulated, individually tested as per IEC 60900 : 2004
• Design: Conical tip, chrome-plated, Black Point
• Handle: Kraftform Comfort with non-roll feature, multi-component

Wera 1162I VDE Insulated Phillips Head Screwdriver 4x200mm

Features

• Suitable for phillips screws
• Insulated blade individually tested as per IEC 60900 : 2004
• Handle has non-roll feature, multi-component

Specifications

Wera 1162I VDE Insulated Phillips Head Screwdriver - 3x150mm

Features

• Suitable for phillips screws
• Insulated blade individually tested as per IEC 60900 : 2004
• Handle has non-roll feature, multi-component

Specifications

Wera 1162I VDE Insulated Phillips Head Screwdriver - 2x100mm

Features

• Suitable for phillips screws
• Insulated blade individually tested as per IEC 60900 : 2004
• Handle has non-roll feature, multi-component

Specifications

• Blade: Insulated, individually tested as per IEC 60900 : 2004
• Design: Conical tip, chrome-plated, Black Point
• Handle: Kraftform Comfort with non-roll feature, multi-component

Wera 1162I VDE Insulated Phillips HeadScrewdriver - 1x80mm

Features

• Suitable for phillips screws
• Insulated blade individually tested as per IEC 60900 : 2004
• Handle has non-roll feature, multi-component

Specifications

• Blade: Insulated, individually tested as per IEC 60900 : 2004
• Design: Conical tip, chrome-plated, Black Point
• Handle: Kraftform Comfort with non-roll feature, multi-component