Housed in a heavy duty 3RU rack mount cabinet, these mixer amplifiers include a host of features and are ideally suited for schools, offices, medical suites, office/factory units etc. Each of the first three inputs
can be configured for either microphone or auxiliary use, whilst the last two are for dedicated auxiliary use. Along with this, the amplifier provides 6 output zones with individual in-built attenuators. Each zone is able to be activated on or off via the front panel switches. LEDs indicate when each zone is selected. All zones can be selected on via the “all call” switch.

Front panel controls are provided for volume, treble and bass for each input, along with a master volume control. Output level is monitored via the front panel LED VU meter.

Fitted with paging chime and siren tone generator. A telephone paging input is also included. The front panel has provision for fitting optional modules such as, A 4344 tuner or A 4346 CD/MP3 player.

Operation is from either 240V AC or 24VDC.

A closing set of contacts enables remote ON/OFF control of the 240V.

Other features include record out socket, pre amp, in/out socket to feed other power amplifiers or insert other effects equipment such as a graphic equalizer.

The amplifier design includes comprehensive protection circuitry, for over current, over temperature and
short circuits.

The addition of the optional A 4353 6 zone paging microphone and A 4352 control PCB, enables paging to each or any combination of speaker zones remotely.

Features:

• 5 inputs • 6 output zones • Direct 100V line output • 4Ω output • Individual zone attenuators (max 80W) • 24V DC operation • LED VU meter • 2 year warranty • Volume, treble and bass controls for each input • Over current protection • Over temperature protection • Short circuit protection • Telephone paging input • Phantom power • Selectable microphone priority

Specifications:

Power: 240 watts RMS Distortion: < 1% @ 1kHz Signal to Noise Ratio Line: >70dB Mic: >60dB Frequency Response 80Hz - 15kHz, ±3dB Mic input sensitivity: 3mV balanced Line inputs sensitivity: 300mV Telephone input 245mV Bass: ±10dB @ 100Hz Treble: ±10dB @ 10kHz Power supply: 240V AC or 24V DC Dimensions: ≈430W x 352D x 133H mm Weight: 14kg

Housed in a heavy duty 3RU rack mount cabinet, these mixer amplifiers include a host of features and are ideally suited for schools, offices, medical suites, office/factory units etc. Each of the first three inputs
can be configured for either microphone or auxiliary use, whilst the last two are for dedicated auxiliary use. Along with this, the amplifier provides 6 output zones with individual in-built attenuators. Each zone is able to be activated on or off via the front panel switches. LEDs indicate when each zone is selected. All zones can be selected on via the “all call” switch.

Front panel controls are provided for volume, treble and bass for each input, along with a master volume control. Output level is monitored via the front panel LED VU meter.

Fitted with paging chime and siren tone generator. A telephone paging input is also included. The front panel has provision for fitting optional modules such as, A 4344 tuner or A 4346 CD/MP3 player.

Operation is from either 240V AC or 24VDC.

A closing set of contacts enables remote ON/OFF control of the 240V.

Other features include record out socket, pre amp, in/out socket to feed other power amplifiers or insert other effects equipment such as a graphic equalizer.

The amplifier design includes comprehensive protection circuitry, for over current, over temperature and
short circuits.

The addition of the optional A 4353 6 zone paging microphone and A 4352 control PCB, enables paging to each or any combination of speaker zones remotely.

Features:

• 5 inputs • 6 output zones • Direct 100V line output • 4Ω output • Individual zone attenuators (max 80W) • 24V DC operation • LED VU meter • 2 year warranty • Volume, treble and bass controls for each input • Over current protection • Over temperature protection • Short circuit protection • Telephone paging input • Phantom power • Selectable microphone priority

Specifications:

Power: 120 watts RMS Distortion: < 1% @ 1kHz Signal to Noise Ratio Line: >70dB Mic: >60dB Frequency Response 80Hz - 15kHz, ±3dB Mic input sensitivity: 3mV balanced Line inputs sensitivity: 300mV Telephone input 245mV Bass: ±10dB @ 100Hz Treble: ±10dB @ 10kHz Power supply: 240V AC or 24V DC Dimensions: ≈430W x 352D x 133H mm Weight: 13kg

An economical solution for smaller installations including offices, workshops, smaller shopping arcades, schools etc. Supplied with one front panel mic input and three rear mounted mic inputs which can also be configured as line inputs. Inputs two and three are 3 pin XLR whilst input four consists of either a 3 pin XLR or RCA sockets. Input five is suitable for either a line or phono input. A preamp output socket is provided enabling connection to extra slave amplifiers. Four speaker zones may be selected on or off via the front panel switches. Output level is monitored via the LED VU meter.Provision is included to fit one of the following optional modules: A 4344A Tuner or A 4346 CD/MP3 player. Operation is from 240V mains with provision for 24VDC battery operation in the event of mains failure. Telephone paging is also available along with a chime and siren tone generator.

Features:

• 5 inputs • 4 output zones • 70V or 100V output • 4Ω or 8Ω output • 24V DC operation • Over temperature, over current and short circuit protection • LED VU meter • 2 year warranty • Telephone paging input • Chime and siren

Specifications:

Power: 240 watts RMS Distortion: < 1% @ 1kHz Signal to Noise Ratio Line: >70dB Mic: >60dB Frequency Response 80Hz - 15kHz, ±3dB Mic input sensitivity: 3mV balanced Line inputs sensitivity: 300mV Telephone input 245mV Bass: ±10dB @ 100Hz Treble: ±10dB @ 10kHz Power supply: 240V AC or 24V DC Dimensions: ≈420W x 320D x 110H mm Weight: 18.7kg

An economical solution for smaller installations including offices, workshops, smaller shopping arcades, schools etc. Supplied with one front panel mic input and three rear mounted mic inputs which can also be configured as line inputs. Inputs two and three are 3 pin XLR whilst input four consists of either a 3 pin XLR or RCA sockets. Input five is suitable for either a line or phono input. A preamp output socket is provided enabling connection to extra slave amplifiers. Four speaker zones may be selected on or off via the front panel switches. Output level is monitored via the LED VU meter.Provision is included to fit one of the following optional modules: A 4344A Tuner or A 4346 CD/MP3 player. Operation is from 240V mains with provision for 24VDC battery operation in the event of mains failure. Telephone paging is also available along with a chime and siren tone generator.

Features:

• 5 inputs • 4 output zones • 70V or 100V output • 4Ω or 8Ω output • 24V DC operation • Over temperature, over current and short circuit protection • LED VU meter • 2 year warranty • Telephone paging input • Chime and siren

Specifications:

Power: 120 watts RMS Distortion: < 1% @ 1kHz Signal to Noise Ratio Line: >70dB Mic: >60dB Frequency Response 80Hz - 15kHz, ±3dB Mic input sensitivity: 3mV balanced Line inputs sensitivity: 300mV Telephone input 245mV Bass: ±10dB @ 100Hz Treble: ±10dB @ 10kHz Power supply: 240V AC or 24V DC Dimensions: ≈420W x 320D x 110H mm Weight: 12.5kg

An economical solution for smaller installations including offices, workshops, smaller shopping arcades, schools etc. Supplied with one front panel mic input and three rear mounted mic inputs which can also be configured as line inputs. Inputs two and three are 3 pin XLR whilst input four consists of either a 3 pin XLR or RCA sockets. Input five is suitable for either a line or phono input. A preamp output socket is provided enabling connection to extra slave amplifiers. Four speaker zones may be selected on or off via the front panel switches. Output level is monitored via the LED VU meter.Provision is included to fit one of the following optional modules: A 4344A Tuner or A 4346 CD/MP3 player. Operation is from 240V mains with provision for 24VDC battery operation in the event of mains failure. Telephone paging is also available along with a chime and siren tone generator.

Features:

• 5 inputs • 4 output zones • 70V or 100V output • 4Ω or 8Ω output • 24V DC operation • Over temperature, over current and short circuit protection • LED VU meter • 2 year warranty • Telephone paging input • Chime and siren

Specifications:

Power: 60 watts RMS Distortion: < 1% @ 1kHz Signal to Noise Ratio Line: >70dB Mic: >60dB Frequency Response 80Hz - 15kHz, ±3dB Mic input sensitivity: 3mV balanced Line inputs sensitivity: 300mV Telephone input 245mV Bass: ±10dB @ 100Hz Treble: ±10dB @ 10kHz Power supply: 240V AC or 24V DC Dimensions: ≈420W x 320D x 110H mm Weight: 10.5kg

Packed with features, this super compact stereo amp is ideally suited to classrooms, boardrooms, boutiques, reception areas or anywhere a small functional stereo system is required. Designed in close consultation with several leading AV installation companies to suit todays requirements. Offering outstanding stereo performance and featuring both microphone and aux input, plus a 3.5mm headphone jack. For ease of use, inputs are included on both the front and rear panels for microphone and auxiliary input.

Mic Input: A balanced 3 pin XLR is provided on the rear panel and a 6.35mm jack on the front.

Aux Input: Dual RCA’s are provided on the rear panel, whilst a 3.5mm jack is provided on the front panel (ideal for iPod/MP3 player connection).

240V AC or 12V DC operation. Suits 4 to 8 ohm speakers.

Specifications:

Power Output: 15 watts RMS Stereo @ 13.8V into 4 Ohm Distortion:< 3% @ 1kHz Signal to Noise Ratio Typically 75dB below rated output. Frequency Response Mic input: 50Hz - 10kHz, -3dB Aux input: 60Hz - 15kHz, -3dB Input Sensitivity Mic 1: 1.5mV balanced 1.5mV unbalanced Music Input: 1V Aux Input: 1V Output Connectors Speakers: Screw terminals Output impedance: 4-16 Headphones: 3.5mm socket Input Connectors Mic 1: 3 pin XLR balanced or 6.35mm jack unbalanced Aux input: RCA stereo socket, bridged mono Music input: 3.5mm socket 12V DC power: Screw terminals 240V AC power: IEC power connector Controls Mic Volume, Aux Volume, Bass, Treble, Balance, ON/OFF switch. Indicators: Power MISC. Power supply: 240V AC or 12V DC Protection: 2A AC fuse and 5A DC fuse 4 x 1A internal speaker protection fuses Weight: ˜2.5kg Dimensions: ˜270W x 160D x 44H mm Colour: Black

This wallplate allows transmission of a VGA video signal over Cat 5e/6 cable up to 135m. VGA connection via DE15. UTP cable connection via RJ45. Ideal for use in classrooms, lecture halls, projector systems etc. In-built 5 level filter provides fine tuning of signal stability & sync. No power required. Max resolution: 1280x1024. Sold in matching pair.

Connects four HDMI AV devices independently and switches each to four HDMI equipped displays located up to 40m away. Each output may be connected via standard HDMI cable (up to 15m) or dual Cat5e/6 cables (up to 40m @ 1080p). Any input may be routed to any output via the front panel switches, IR remote control or RS-232 communication.

The unit also sends infra red signals to source devices from a central location with the included infra-red target and emitters. Supports resolutions up to 1080p. HDCP compliant. 19” rack mountable (ears supplied). Dimensions: ≈441W x 202D x 44.5Hmm. Supplied in a comprehensive package including, matrix switcher, 4 balun receivers, 4 infra red emitters, infra red target, remote control and power supplies.

Are you tired of adjusting your audio level whenever the ad break comes on? Or do you find that TV stations have differing output volumes? This tiny box can solve these issues by compressing or expanding audio as necessary to provide a constant audio level. The in-built dynamic sound processor also boosts low and high frequencies improving your TV listening experience. Other applications include levelling output signal from an MP3 player or regulating audio levels of radio stations. Connects inline between TV, set top box, PVR, tuner or MP3 player output and amplifier. Includes plugpack.

Overview

TOPFIELD Digital Set Top Boxes are second to none in quality, reliability and picture quality. All models are designed and engineered in Korea specifically for the Australian market. Don't settle for cheap imitations when you can buy the best.

Key Features

DVB-T: 1 x Mpeg2 - HD

Custom Favourite List: Yes

Free to Air Electronic Program Guide: Yes

HDMI Output: Yes

Component (YPbPr) Output: Yes

Composite (CVBS) Output: Yes

Digital Audio Optical: Yes

Digitel DVB-T Terrestrial digital TV receiver featuring a compact design, HDMI output and support for high definition video up to 1080i.

Features:

- DVB-T compliant - HDMI digital connection - Video output selection, component, S-video, composite - 1080i, 720p, 576p support - 4:3, 16:9 support - 7 day electronic program guide - Channel favourites - Teletext support - Dolby 5.1ch surround sound support - Coaxial/optical digital sound output - Time zone and daylight savings support - Low power consumption - Dimensions:260W x 180D x 43Hmm - Timer

Beyonwiz DP-P2TB Twin Tuner High Definition Personal Video Recorder, Network Media Player, World's First HD Digital PVR with A/V Input.

Features:

Dual recording and time-shifting. Dual HD MPEG2/MPEG4 recording up to 1080i. Recording external video source to DP-P2 as H.264 video format. Time-shifting, Timer recording function for external video source. Movie : MKV, WMV, AVI, MPG, VOB, MP4, ASF, TP, TRP. Music : MP3, WMA, AAC, Ogg, AC3, Play List. Photo : BMP, JPEG, PNG. FF (x2, x4, x8, x16, x32), REW (x2, x4, x8, x16, x32) Pause, Slow Forward and 4 user configurable Skip buttons Photo slide show Movie subtitle support: SMI, SUB, ART File streaming & playback between Beyonwiz products and network shares Favorite album editing (movie, music, photo) Direct playback of contents in USB memory cards (with Built-in CF and SD Card Reader) Direct playback of PC contents through home network Back-up contents in DP-P2 to USB storage and network PC 2000 Service programmable Service List editing Favorite service list editing Firmware upgrade with USB memory, memory card and network PC IceTV electronic program guide (EPG) for on-screen service information & IceTV Remote Parental lock facility by service and program event Multilingual audio support Teletext-subtitle and DVB-subtitle supported Teletext supported by software emulation Graphic based user interface Dolby Digital Decoding HDMI & component output for HD VFD display and Real Time Clock Picture rotation (90 degree) Color Theme on your paste

• Get up to 16 channels free
• IceTV 7 day electronic program guide and remote recording
• High definition twin tuner PVR
• Pause and rewind live TV
• Up to 60 resume plays from HDD
• 500GB internal hard drive
• Network with your PC & other BW units
• Record 2 programs simultaneously while whaching a third playback from the HDD
• View movies, pictures and listen to music direct from your PC or external hard drive
• Transfer your favourite shows to your PC or external hard drive

Includes four LEDs. BNC connection. Approx. 350mm length. 12V DC powered.

Featuring four high power LED's. XLR 3 Pin connection. Approx. 350mm length. 12V DC powered.

Featuring four high power LED's. XLR 3 Pin connection. Approx. 350mm length. 12V DC powered.