Techtronics product archive #40622
| Image |
Date |
Product description |
Price |
Buy |
|
22/03
|
Vivotek FD8134V Dome Network Camera - 1/4`` CMOS Sensor, Real-Time H.264, Built-In MicroSD/SDHC Card, Built-In IR Illuminators, 3 Axis, Vandal-proof IP66 VIVOTEK FD8133V is an easy-to-use fixed dome network camera specifically designed for indoor/outdoor security applications with a compact, stylish vandal-proof exterior. Equipped with a 1MP sensor enabling viewing resolution of 1280x800 at 30 fps, users need look no further for an all-in-one camera capable of capturing high quality, high resolution video.
The FD8133V supports the industry-standard H.264 compression technology, drastically reducing file sizes and conserving valuable network bandwidth. With MPEG-4 and MJPEG compatibility also included, video streams can also be transmitted in any of these formats for versatile applications. The streams can also be individually configured to meet different constraints, thereby further reducing bandwidth and storage requirements. Users can thus receive multiple streams simultaneously in different resolutions, frame rates, and image qualities for viewing on different platforms.
Its IP66-rated housing protects the camera body against rain and dust and ensures operation under poor weather conditions. Furthermore, the metal vandal-proof housing effectively provides robust protection from vandalism. Also included are a number of advanced features standard on VIVOTEK cameras, including tamper detection, MicroSD/SDHC card slot, and VIVOTEK's 32-channel recording software. With all of these capabilities, the FD8133V presents the best value in IP surveillance for indoor/outdoor applications.
Features
- Easy and Flexible Installation
- Compact and Attractive ID Design
- 1/4" CMOS Sensor in 1280 X 800 resolution
- Real-time H.264, MPEG-4 and MJPEG Compression (Triple Codec)
- Vandal-proof and Weather-proof IP66 rated Housing
- Built-in MicroSD/SDHC Card Slot for On-board Storage
- 3-axis Mechanical Design for Ceiling/Wall Mount Installation
Specifications
| System |
CPU: TI DM365 SoC
Flash: 128MB
RAM: 256MB
Embedded OS: Linux 2.6 |
| Lens |
f=3.6 mm
F 1.8
Board lens
|
| Angle of View |
56 (horizontal)
41 (vertical)
|
| Shutter Time |
1/5 ~ 1/25,000 sec |
| Image sensor |
1/4" CMOS in 1280x800 Resolution |
| Minimum Illumination |
0.3 Lux @ F1.8 ( typical )
|
| Video |
Compression: H.264, MPEG-4 & MJPEG
Streaming:
Simultaneous multiple streams
H.264 streaming over UDP, TCP, HTTP or HTTPS
MPEG-4 streaming over UDP, TCP, HTTP or HTTPS
MPEG-4 multicast streaming
MJPEG streaming over HTTP or HTTPS
Supports activity adaptive streaming for dynamic frame rate control
Supports 3GPP mobile surveillance
Frame rates:
H.264: Up to Up to 30/25 fps at 1280x800
MPEG-4: Up to Up to 30/25 fps at 1280x800
MJPEG: Up to Up to 30/25 fps at 1280x800
|
| Image Settings |
Adjustable image size, quality, and bit rate
Time stamp and text caption overlay
Flip & mirror
Configurable brightness, contrast, saturation, sharpness, white balance and exposure
AGCAWBAES
Supports privacy masks
BLC (Backlight compensation)
|
| Networking |
10/100 Mbps Ethernet, RJ-45
ONVIF support
Protocols: IPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS, DDNS, PPPoE, CoS, QoS, SNMP and 802.1X |
| Alarm and Event Management |
Triple-window video motion detection
1 D/I for external sensor and alarm
Event notification using HTTP, SMTP, or FTP
Local recording of MP4 files
Tamper Detection
|
| On-board Storage |
MicroSD/SDHC card slot
Stores snapshots and video clips
|
| Security |
Multi-level user access with password protection
IP address filtering
HTTPS encrypted data transmission
802.1X port-based authentication for network protection
|
| Users |
10 clients on-line monitoring at the same time |
| LED Indicator |
System power and status indicator
System activity and network link indicator
|
| Power |
12V DC
Power consumption: Max. 3.5 W
|
| Approvals |
CEC-TickFCCLVDVCCI |
| Operating Environments |
Temperature: 0~ 50 C (32 ~ 122 F)
Humidity: 90%
|
| Viewing System Requirements |
OS: Microsoft Windows 2000/XP/Vista/7
Cell phone: 3GPP player
Real Player: 10.5 or above
Quick Time: 6.5 or above |
| Installation, Management, and Maintenance |
3-axis mechanism for flexible ceiling and wall mount installation
Camera angle adjustment:
Pan range: 350
Tilt range: 85
Rotate range: 350
Installation Wizard 2
Supports firmware upgrade
|
| Applications |
SDK available for application development and system integration |
| Warranty |
12 months |
|
|
|
|
22/03
|
Manson Regulated Lab Power Supply - 1-30V, 20A
|
|
|
|
22/03
|
Sanyo Eneloop Rechargeable Batteries - 4xAAA NiMH Batteries - To Suit Sanyo Eneloop Range Chargers AAA NiMH Rechargeable Battery
| Pre-charged and ready to use off the shelf |
| Can be recharged up to 1500 times |
| High capacity and performance |
| Long shelf life (retains 75% of the capacity after 3 years) |
| Economical to use |
| Environmentally friendly |
| Operates at low temperatures (-10 degrees) |
| Takes over 500 photos |
| Recommended for high drain devices |
| Type: Nickel-Metal Hydride Battery |
Size: AAA consumer Type |
| Capacity*1Typical |
800mAh |
| Capacity *1Minimum |
750mAh |
| Nominal voltage |
1.2V |
| Charge current x Time |
(Fast charge*2) 800mA x approx. 1.1h |
| Ambient Temperature Charge |
(Fast charge*2) 0 ~ 40C |
| Ambient Temperature Discharge |
0 ~ 50C |
| Storage condition within 90 days |
-20 ~ 40C |
| Storage condition within 1 year |
-20 ~ 30C |
| Internal Impedance*3 (after discharge to E.V. = 1.0V) |
Approx. 40m Ohm |
| Weight*4 |
Approx. 13g |
| Size: (Diameter) x (Height)*4 |
10.5 (d) x 44.5 (h)mm |
*1 charge: 80mA x 16h; disharge: 160mA (E.V = 1.0V) at 25C
*2 Use recommended charging system
*3 After a few charge and discharge cycles under the above *1 condition
*4 With tube
|
|
|
|
22/03
|
Sanyo Eneloop Rechargeable Batteries - 2xAAA NiMH Batteries - To Suit Sanyo Eneloop Range Chargers AAA NiMH Rechargeable Battery
| Pre-charged and ready to use off the shelf |
| Can be recharged up to 1500 times |
| High capacity and performance |
| Long shelf life (retains 75% of the capacity after 3 years) |
| Economical to use |
| Environmentally friendly |
| Operates at low temperatures (-10 degrees) |
| Takes over 500 photos |
| Recommended for high drain devices |
| Type: Nickel-Metal Hydride Battery |
Size: AAA consumer Type |
| Capacity*1 Typical |
800mAh |
| Capacity*1 Minimum |
750mAh |
| Nominal voltage |
1.2V |
| Charge current x Time |
(Fast charge*2) 800mA x approx. 1.1h |
| Ambient Temperature Charge |
(Fast charge*2) 0 ~ 40C |
| Ambient Temperature Discharge |
0 ~ 50C |
| Storage condition within 90 days |
-20 ~ 40C |
| Storage conditions within 1 year |
-20 ~ 30C |
| Internal Impedance*3 (after discharge to E.V. = 1.0V) |
Approx. 40m Ohm |
| Weight*4 |
Approx. 13g |
| Size: (Diameter) x (Height)*4 |
10.5 (d) x 44.5 (h)mm |
*1 charge: 80mA x 16h; disharge: 160mA (E.V = 1.0V) at 25C
*2 Use recommended charging system
*3 After a few charge and discharge cycles under the above*1 condition
*4 With tube
|
|
|
|
22/03
|
Sanyo Eneloop Rechargeable Batteries - 4xAA NiMH Batteries - To Suit Sanyo Eneloop Range Chargers AA NiMH Rechargeable Battery
| Pre-charged and ready to use off the shelf |
| Can be recharged up to 1500 times |
| High capacity and performance |
| Long shelf life (retains 75% of the capacity after 3 years) |
| Economical to use |
| Environmentally friendly |
| Operates at low temperatures (-10 degrees) |
| Takes over 500 photos |
| Recommended for high drain devices |
| Type: Nickel-Metal Hydride Battery |
Size: AA consumer Type |
| Capacity*1 Typical |
2000mAh |
| Capacity*1 Minimum |
1900mAh |
| Nominal voltage |
1.2V |
| Charge current x Time |
(Fast charge*2) 2000mA x approx. 1.1h |
| Ambient Temperature Charge |
(Fast charge*2) 0 ~ 40C |
| Ambient Temperature Discharge |
0 ~ 50C |
| Ambient Temperature Storage condition within 30 days |
-20 ~ 50C |
| Ambient Temperature Storage condition within 90 days |
-20 ~ 40C |
| Ambient Temperature Storage condition within 1 year |
-20 ~ 30C |
| Internal Impedance*3 (after discharge to E.V. = 1.0V) |
Approx. 25m Ohm |
| Weight*4 |
Approx. 27g |
| Size: (Diameter) x (Height)*4 |
14.35 (d) x 50.4 (h)mm |
*1 charge: 200mA x 16h; disharge: 400mA (E.V = 1.0V) at 20C
*2 Use recommended charging system
*3 After a few charge and discharge cycles under the above *1 condition
*4 With tube
|
|
|
|
22/03
|
Sanyo Eneloop Rechargeable Batteries - 2xAA NiMH Batteries - To Suit Sanyo Eneloop Range Chargers AA NiMH Rechargeable Battery
| Pre-charged and ready to use off the shelf |
| Can be recharged up to 1500 times |
| High capacity and performance |
| Long shelf life (retains 75% of the capacity after 3 years) |
| Economical to use |
| Environmentally friendly |
| Operates at low temperatures (-10 degrees) |
| Takes over 500 photos |
| Recommended for high drain devices |
Specifications
| Type: Nickel-Metal Hydride Battery |
Size: AA consumer Type |
| Capacity*1 |
| Typical |
2000mAh |
| Minimum |
1900mAh |
|
| Nominal voltage |
1.2V |
| Charge current x Time |
| Fast charge*2 |
2000mA x approx. 1.1h |
|
| Ambient Temperature |
| Charge (Fast charge*2) |
0 ~ 40C |
| Discharge |
0 ~ 50C |
| Storage condition (within 30 days) |
-20 ~ 50C |
| Storage condition (within 90 days) |
-20 ~ 40C |
| Storage condition (within 1 year) |
-20 ~ 30C |
|
| Internal Impedance*3 (after discharge to E.V. = 1.0V) |
Approx. 25m Ohm |
| Weight*4 |
Approx. 27g |
| Size: (Diameter) x (Height)*4 |
14.35 (d) x 50.4 (h)mm |
*1 charge: 200mA x 16h; disharge: 400mA (E.V = 1.0V) at 20C
*2 Use recommended charging system
*3 After a few charge and discharge cycles under the above *1 condition
*4 With tube
|
|
|
|
22/03
|
Sanyo Eneloop Standard Charger + 4xAA NiMH Batteries - To Suit Sanyo Eneloop Range Battery Charger
| Designed especially for eneloop range |
| Charge indicator light |
| Includes 4 x eneloop AA cells |
| Charges AA or AAA batteries |
| Batteries can be recharged up to 1500 times |
| Recyclable packaging |
| Charge times: |
| -2 or 4 AA eneloop 10 hours |
| -2 or 4 AAA eneloop 8 hours |
| Suitable battery |
Charge Time |
| HR3UTG x 2 or 4 (AA) |
Approx. 10 hrs |
| HR4UTG x 2 or 4 (AAA) |
Approx. 8 hrs |
| Input power supply |
240VAC; 50Hz |
| Size |
75mm (w) x 40mm (d) x 118mm (h) |
| Weight |
230g (without batteries) |
| Temperature range |
0 to 35C |
|
|
|
|
22/03
|
Sanyo Eneloop Quick Charger + 4xAA NiMH Batteries - To Suit Sanyo Eneloop Range Quick Battery Charger including 4 x Sanyo eneloop AA batteries
| Charges 1-4 AA /AAA NiMH cells |
| World voltage auto detect 100-240VAC |
| 4LED Individual battery control |
| Protection timer (270 minutes) |
| Includes 4 x Sanyo eneloop AA cells |
Charge times:
| AA: 3-4pcs 220mins, 2pcs 100mins (double speed), 1pc 75mins (triple speed) |
| AAA: 3-4pcs 200mins, 2pcs 100mins (double speed), 1pc 65mins |
| Suitable battery |
Charge Time |
| HR3UTG x 1 (AA) |
Approx. 75 minutes |
| HR3UTG x 2 (AA) |
Approx. 100 minutes |
| HR3UTG x 3-4 (AA) |
Approx. 220 minutes |
| HR4UTG x 1 (AAA) |
Approx. 65 minutes |
| HR4UTG x 2 (AAA) |
Approx. 100 minutes |
| HR4UTG x 3-4 (AAA) |
Approx. 200 minutes |
| Input power supply |
AC100-240V |
| Size |
65mm (w) x 27mm (d) x 105mm (h) |
| Weight |
96.2g (without batteries) |
| Temperature range |
5 to 35C |
|
|
|
|
22/03
|
Sanyo Eneloop Standard Charger + 2xAA NiMH Batteries - To Suit Sanyo Eneloop Range
Battery Charger
| Designed especially for eneloop range |
| Charge indicator light |
| Includes 2 x eneloop AA cells |
| Charges AA or AAA batteries |
| Batteries can be recharged up to 1500 times |
| Recyclable packaging |
| Charge times: |
| 2 or 4 AA eneloop 10 hours |
| 2 or 4 AAA eneloop 8 hours |
Specifications
| Suitable battery |
Charge Time |
| HR3UTG x 2 or 4 (AA) |
Approx. 10 hrs |
| HR4UTG x 2 or 4 (AAA) |
Approx. 8 hrs |
| Input power supply |
240VAC; 50Hz |
| Size |
75mm (w) x 40mm (d) x 118mm (h) |
| Weight |
230g (without batteries) |
| Temperature range |
0 to 35C |
Combining the Advantages
For the first time in battery-history it has been possible to combine the advantages of rechargeable batteries with the advantages of disposable batteries. This new kind of battery was developed by SANYO, the worldwide leader in rechargeable batteries in 2005, and was launched in the European market in 2006. Since then it has been the most successful new battery ever put on the market.
Historically disposable and rechargeable batteries had their individual advantages which were impossible to combine.
Disposable batteries could be used immediately out of the package and could be stored for months or even years without having to consider their self discharge. Their ease of use was unbeatable, and basically they could be used everywhere. However, once empty they had to be thrown away and a new battery had to be purchased.
Rechargeable batteries had the major advantage, they could be used more than once. By re-charging, the use of one battery could be multiplied.
This clear advantage however was associated with some less appealing aspects. Before usage they had to be charged, and once charged they lost their energy rather quickly, so frequent re-charging or charging just before usage was necessary.
|
Disposable Batteries
|
|
Rechargeable Batteries
|
|
eneloop
|
| |
|
|
|
|
|
can be used immediately
are simple to use
have low initial cost
can be stored for long time
|
|
have to be charged before use
are complicated to use
have higher initial cost
need to be charged frequently
|
|
can be used immediately
are simple to use
can be stored for long time
|
| |
|
|
|
|
|
can be used only once
are not environmentally friendly
have high long term cost
|
|
can be used many times
environmentally friendly
have low long term cost
|
|
can be used many times
environmentally friendly
have low long term cost
|
|
|
|
|
Previous Page
|
Next Page
|
|
