Techtronics product archive #40019
| Image |
Date |
Product description |
Price |
Buy |
|
27/07
|
3.0mm High Ratio Heatshrink, reduces to 1.0mm - 5x200mm Lengths XLH Range Thin Wall High Shrink
The XLH range is a thin walled high shrink ratio tubing, which is used in
areas where the shrink diameters of the smallest and largest shrink vary a lot.
A typical use is for connectors on the end of the cord, where the tubing will
shrink around the connector, and around the wire. Because of the high shrink
ratio, it is usually possible to slip the tubing over the connector, and shrink it
onto a cord, which is significantly smaller than the connector.
*Highly flexible
*Flame retarded
*Abrasion and impact resistant
*Available in ultraviolet resistant black only
*Continuous operating temperature 75 C to 135 C
*Nominal shrink ratio 3:1
*In house cutting facility is available for cut lengths
The tubing is available on reels, or in handy kit packs with 5 by 200mm pieces of
shrink in a bag. It should be shrunk using a heatgun such as the CABAC KG2000
general purpose heatgun.
Conformant Standards MIL-1-23053/5; JIS
Material Cross-linked, thermally stabilised flame retarded polyolefin
Continuous operating temp -75 C to +135 C
Shrinkage temp > 100 C
Longitudinal shrinkage < 5%
Tensile strength 16 MPa
Breakdown voltage 25 kV/mm wall thickness
Volume resistivity 1.0 x 1014 ohm cm
Elongation at break point 400%
Water absorption 0.15% max
Flammability Passed ASTM-D-2671
UV stability Black tubing is stable
Voltage rating 600V
|
|
|
|
27/07
|
1.5mm High Ratio Heatshrink, reduces to 0.5mm - 5x200mm Lengths XLH Range Thin Wall High Shrink
The XLH range is a thin walled high shrink ratio tubing, which is used in
areas where the shrink diameters of the smallest and largest shrink vary a lot.
A typical use is for connectors on the end of the cord, where the tubing will
shrink around the connector, and around the wire. Because of the high shrink
ratio, it is usually possible to slip the tubing over the connector, and shrink it
onto a cord, which is significantly smaller than the connector.
* Highly flexible
* Flame retarded
* Abrasion and impact resistant
* Available in ultraviolet resistant black only
* Continuous operating temperature 75 C to 135 C
* Nominal shrink ratio 3:1
* In house cutting facility is available for cut lengths
The tubing is available on reels, or in handy kit packs with 5 by 200mm pieces of
shrink in a bag. It should be shrunk using a heatgun such as the CABAC KG2000
general purpose heatgun.
Conformant Standards MIL-1-23053/5; JIS
Material Cross-linked, thermally stabilised flame retarded polyolefin
Continuous operating temp -75 C to +135 C
Shrinkage temp > 100 C
Longitudinal shrinkage < 5%
Tensile strength 16 MPa
Breakdown voltage 25 kV/mm wall thickness
Volume resistivity 1.0 x 1014 ohm cm
Elongation at break point 400%
Water absorption 0.15% max
Flammability Passed ASTM-D-2671
UV stability Black tubing is stable
Voltage rating 600V
|
|
|
|
27/07
|
Dual Wall Heatshrink, reduces to 19.0mm - 4ft XDW - Heatshrink - Dual - Walled Flexible Glue Lined
XDW is a thin-walled heatshrink tubewith a glue lined inner surface. It ismade from a single extrusion of polyolefin that is partially irradiated and as such is commonly referred to as dual walled .
*Highly flexible.
*Very high shrink ratio 3:1.
*Flame retarded.
*Good mechanical adhesion.
This is a material with many applications in the electrical and mechanical protection areas. Since the glue holds the tubing in place it is commonly used for brake and fuel pipe protection in the automotive industry. Typical electrical applications are strain relief on cords, and insulation repair. In general the tube is not recommended for waterproofing since the glue layer is primarily a mechanical adhesion and is thin. Use SMDW for fail safe waterproof joints.
Conformant Standards UL: MIL-1-23053/4: JIS
Material Dual wall, flexible, flame retardedpolyolefin with modified polyamideadhesive sealant
Continuous operating temp -55 C to +110 C
Shrinkage temp Starts at 90 C, completed at 125 C
Tensile strength 10.5 MPa
Elongation at break point 200%
Longitudinal shrinkage 15%
Breakdown voltage 20 kV/mm wall thickness
Volume resistivity 1.0 x 1014 ohm cm
Water absorption 0.5%
Flammability All tubing flame test: pass
UV resistance Passed-ISO 1408
Voltage rating 600 V
|
|
|
|
27/07
|
39.0mm Dual Wall Heatshrink, reduces to 15.0mm - 4ft XDW - Heatshrink - Dual - Walled Flexible Glue Lined
XDW is a thin-walled heatshrink tubewith a glue lined inner surface. It ismade from a single extrusion of polyolefin that is partially irradiated and as such is commonly referred to as dual walled .
*Highly flexible.
*Very high shrink ratio 3:1.
*Flame retarded.
*Good mechanical adhesion.
This is a material with many applications in the electrical and mechanical protection areas. Since the glue holds the tubing in place it is commonly used for brake and fuel pipe protection in the automotive industry. Typical electrical applications are strain relief on cords, and insulation repair. In general the tube is not recommended for waterproofing since the glue layer is primarily a mechanical adhesion and is thin. Use SMDW for fail safe waterproof joints.
Conformant Standards UL: MIL-1-23053/4: JIS
Material Dual wall, flexible, flame retardedpolyolefin with modified polyamideadhesive sealant
Continuous operating temp -55 C to +110 C
Shrinkage temp Starts at 90 C, completed at 125 C
Tensile strength 10.5 MPa
Elongation at break point 200%
Longitudinal shrinkage 15%
Breakdown voltage 20 kV/mm wall thickness
Volume resistivity 1.0 x 1014 ohm cm
Water absorption 0.5%
Flammability All tubing flame test: pass
UV resistance Passed-ISO 1408
Voltage rating 600 V
|
|
|
|
27/07
|
25.4mm Dual Wall Heatshrink, reduces to 10.2mm - 4ft XDW - Heatshrink - Dual - Walled Flexible Glue Lined
XDW is a thin-walled heatshrink tubewith a glue lined inner surface. It ismade from a single extrusion of polyolefin that is partially irradiated and as such is commonly referred to as dual walled .
*Highly flexible.
*Very high shrink ratio 3:1.
*Flame retarded.
*Good mechanical adhesion.
This is a material with many applications in the electrical and mechanical protection areas. Since the glue holds the tubing in place it is commonly used for brake and fuel pipe protection in the automotive industry. Typical electrical applications are strain relief on cords, and insulation repair. In general the tube is not recommended for waterproofing since the glue layer is primarily a mechanical adhesion and is thin. Use SMDW for fail safe waterproof joints.
Conformant Standards UL: MIL-1-23053/4: JIS
Material Dual wall, flexible, flame retardedpolyolefin with modified polyamideadhesive sealant
Continuous operating temp -55 C to +110 C
Shrinkage temp Starts at 90 C, completed at 125 C
Tensile strength 10.5 MPa
Elongation at break point 200%
Longitudinal shrinkage 15%
Breakdown voltage 20 kV/mm wall thickness
Volume resistivity 1.0 x 1014 ohm cm
Water absorption 0.5%
Flammability All tubing flame test: pass
UV resistance Passed-ISO 1408
Voltage rating 600 V
|
|
|
|
27/07
|
12.7mm Dual Wall Heatshrink, reduces to 4.0mm - 4ft XDW - Heatshrink - Dual - Walled Flexible Glue Lined
XDW is a thin-walled heatshrink tubewith a glue lined inner surface. It ismade from a single extrusion of polyolefin that is partially irradiated and as such is commonly referred to as dual walled .
*Highly flexible.
*Very high shrink ratio 3:1.
*Flame retarded.
*Good mechanical adhesion.
This is a material with many applications in the electrical and mechanical protection areas. Since the glue holds the tubing in place it is commonly used for brake and fuel pipe protection in the automotive industry. Typical electrical applications are strain relief on cords, and insulation repair. In general the tube is not recommended for waterproofing since the glue layer is primarily a mechanical adhesion and is thin. Use SMDW for fail safe waterproof joints.
Conformant Standards UL: MIL-1-23053/4: JIS
Material Dual wall, flexible, flame retardedpolyolefin with modified polyamideadhesive sealant
Continuous operating temp -55 C to +110 C
Shrinkage temp Starts at 90 C, completed at 125 C
Tensile strength 10.5 MPa
Elongation at break point 200%
Longitudinal shrinkage 15%
Breakdown voltage 20 kV/mm wall thickness
Volume resistivity 1.0 x 1014 ohm cm
Water absorption 0.5%
Flammability All tubing flame test: pass
UV resistance Passed-ISO 1408
Voltage rating 600 V
|
|
|
|
27/07
|
9.5mm Dual Wall Heatshrink, reduces to 3.0mm - 4ft XDW - Heatshrink - Dual - Walled Flexible Glue Lined
XDW is a thin-walled heatshrink tubewith a glue lined inner surface. It ismade from a single extrusion of polyolefin that is partially irradiated and as such is commonly referred to as dual walled .
*Highly flexible.
*Very high shrink ratio 3:1.
*Flame retarded.
*Good mechanical adhesion.
This is a material with many applications in the electrical and mechanical protection areas. Since the glue holds the tubing in place it is commonly used for brake and fuel pipe protection in the automotive industry. Typical electrical applications are strain relief on cords, and insulation repair. In general the tube is not recommended for waterproofing since the glue layer is primarily a mechanical adhesion and is thin. Use SMDW for fail safe waterproof joints.
Conformant Standards UL: MIL-1-23053/4: JIS
Material Dual wall, flexible, flame retardedpolyolefin with modified polyamideadhesive sealant
Continuous operating temp -55 C to +110 C
Shrinkage temp Starts at 90 C, completed at 125 C
Tensile strength 10.5 MPa
Elongation at break point 200%
Longitudinal shrinkage 15%
Breakdown voltage 20 kV/mm wall thickness
Volume resistivity 1.0 x 1014 ohm cm
Water absorption 0.5%
Flammability All tubing flame test: pass
UV resistance Passed-ISO 1408
Voltage rating 600 V
|
|
|
|
27/07
|
19.1mm Dual Wall Heatshrink, reduces to 8.0mm - 4ft XDW - Heatshrink - Dual - Walled Flexible Glue Lined
XDW is a thin-walled heatshrink tubewith a glue lined inner surface. It ismade from a single extrusion of polyolefin that is partially irradiated and as such is commonly referred to as dual walled .
*Highly flexible.
*Very high shrink ratio 3:1.
*Flame retarded.
*Good mechanical adhesion.
This is a material with many applications in the electrical and mechanical protection areas. Since the glue holds the tubing in place it is commonly used for brake and fuel pipe protection in the automotive industry. Typical electrical applications are strain relief on cords, and insulation repair. In general the tube is not recommended for waterproofing since the glue layer is primarily a mechanical adhesion and is thin. Use SMDW for fail safe waterproof joints.
Conformant Standards UL: MIL-1-23053/4: JIS
Material Dual wall, flexible, flame retardedpolyolefin with modified polyamideadhesive sealant
Continuous operating temp -55 C to +110 C
Shrinkage temp Starts at 90 C, completed at 125 C
Tensile strength 10.5 MPa
Elongation at break point 200%
Longitudinal shrinkage 15%
Breakdown voltage 20 kV/mm wall thickness
Volume resistivity 1.0 x 1014 ohm cm
Water absorption 0.5%
Flammability All tubing flame test: pass
UV resistance Passed-ISO 1408
Voltage rating 600 V
|
|
|
|
27/07
|
6.4mm Dual Wall Heatshrink, reduces to 2.0mm - 4ft XDW - Heatshrink - Dual - Walled Flexible Glue Lined
XDW is a thin-walled heatshrink tubewith a glue lined inner surface. It ismade from a single extrusion of polyolefin that is partially irradiated and as such is commonly referred to as dual walled .
*Highly flexible.
*Very high shrink ratio 3:1.
*Flame retarded.
*Good mechanical adhesion.
This is a material with many applications in the electrical and mechanical protection areas. Since the glue holds the tubing in place it is commonly used for brake and fuel pipe protection in the automotive industry. Typical electrical applications are strain relief on cords, and insulation repair. In general the tube is not recommended for waterproofing since the glue layer is primarily a mechanical adhesion and is thin. Use SMDW for fail safe waterproof joints.
Conformant Standards UL: MIL-1-23053/4: JIS
Material Dual wall, flexible, flame retardedpolyolefin with modified polyamideadhesive sealant
Continuous operating temp -55 C to +110 C
Shrinkage temp Starts at 90 C, completed at 125 C
Tensile strength 10.5 MPa
Elongation at break point 200%
Longitudinal shrinkage 15%
Breakdown voltage 20 kV/mm wall thickness
Volume resistivity 1.0 x 1014 ohm cm
Water absorption 0.5%
Flammability All tubing flame test: pass
UV resistance Passed-ISO 1408
Voltage rating 600 V
|
|
|
|
27/07
|
4.8mm Dual Wall Heatshrink, reduces to 1.5mm - 4ft XDW - Heatshrink - Dual - Walled Flexible Glue Lined
XDW is a thin-walled heatshrink tubewith a glue lined inner surface. It ismade from a single extrusion of polyolefin that is partially irradiated and as such is commonly referred to as dual walled .
*Highly flexible.
*Very high shrink ratio 3:1.
*Flame retarded.
*Good mechanical adhesion.
This is a material with many applications in the electrical and mechanical protection areas. Since the glue holds the tubing in place it is commonly used for brake and fuel pipe protection in the automotive industry. Typical electrical applications are strain relief on cords, and insulation repair. In general the tube is not recommended for waterproofing since the glue layer is primarily a mechanical adhesion and is thin. Use SMDW for fail safe waterproof joints.
Conformant Standards UL: MIL-1-23053/4: JIS
Material Dual wall, flexible, flame retardedpolyolefin with modified polyamideadhesive sealant
Continuous operating temp -55 C to +110 C
Shrinkage temp Starts at 90 C, completed at 125 C
Tensile strength 10.5 MPa
Elongation at break point 200%
Longitudinal shrinkage 15%
Breakdown voltage 20 kV/mm wall thickness
Volume resistivity 1.0 x 1014 ohm cm
Water absorption 0.5%
Flammability All tubing flame test: pass
UV resistance Passed-ISO 1408
Voltage rating 600 V
|
|
|
|
27/07
|
3.2mm Dual Wall Heatshrink, reduces to 0.6mm - 4ft
XDW - Heatshrink - Dual - Walled Flexible Glue Lined
XDW is a thin-walled heatshrink tubewith a glue lined inner surface. It ismade from a single extrusion of polyolefin that is partially irradiated and as such is commonly referred to as dual walled .
*Highly flexible.
*Very high shrink ratio 3:1.
*Flame retarded.
*Good mechanical adhesion.
This is a material with many applications in the electrical and mechanical protection areas. Since the glue holds the tubing in place it is commonly used for brake and fuel pipe protection in the automotive industry. Typical electrical applications are strain relief on cords, and insulation repair. In general the tube is not recommended for waterproofing since the glue layer is primarily a mechanical adhesion and is thin. Use SMDW for fail safe waterproof joints.
Conformant Standards UL: MIL-1-23053/4: JIS
Material Dual wall, flexible, flame retardedpolyolefin with modified polyamideadhesive sealant
Continuous operating temp -55 C to +110 C
Shrinkage temp Starts at 90 C, completed at 125 C
Tensile strength 10.5 MPa
Elongation at break point 200%
Longitudinal shrinkage 15%
Breakdown voltage 20 kV/mm wall thickness
Volume resistivity 1.0 x 1014 ohm cm
Water absorption 0.5%
Flammability All tubing flame test: pass
UV resistance Passed-ISO 1408
Voltage rating 600 V
|
|
|
|
27/07
|
5mm Thin Wall Heatshrink, reduces to 2.4mm, 10m - Black
XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
51mm Thin Wall Heatshrink, reduces to 25.4mm, 4ft - Brown
XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
3.5mm Thin Wall Heatshrink, reduces to 1.6mm, 200 Pack - Clear
XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
20mm Thin Wall Heatshrink, reduces to 9.5mm, 5m - Yellow/Green
XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
20mm Thin Wall Heatshrink, reduces to 9.5mm, 5m - Black
XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
20mm Thin Wall Heatshrink, reduces to 9.5mm, 4ft - Black
XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
2.5mm Thin Wall Heatshrink, reduces to 1.2mm, 10m - Black
XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
13mm Thin Wall Heatshrink, reduces to 6.4mm, 5m - Yellow/Green XLP - Heatshrink - Thin Wall - Non Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Abrasion and impact resistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
13mm Thin Wall Heatshrink, reduces to 6.4mm, 50 Pack - Yellow/Green XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
10mm Thin Wall Heatshrink, reduces to 4.8mm, 5m - Yellow/Green
XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
3.5mm Thin Wall Heatshrink, reduces to 1.6mm, 200 Pack - Blue
XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
XLP 13mm Thin Wall Heatshrink, reduces to 6.4mm, 50 Pack - Black
XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
25mm Thin Wall Heatshrink, reduces to 12.7mm, 5m - Red XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
25mm Thin Wall Heatshrink, reduces to 12.7mm, 5m - Blue XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
25mm Thin Wall Heatshrink, reduces to 12.7mm, 5m - Black XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
7mm Thin Wall Heatshrink, reduces to 3.2mm, 5m - Red XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
7mm Thin Wall Heatshrink, reduces to 3.2mm, 5m - Clear XLP - Heatshrink - Thin Wall - Non Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Abrasion and impact resistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
7mm Thin Wall Heatshrink, reduces to 3.2mm, 5m - Blue
XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
7mm Thin Wall Heatshrink, reduces to 3.2mm, 5m - Black XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
76mm Thin Wall Heatshrink, reduces to 38.1mm, 25 Pack - Clear XLP - Heatshrink - Thin Wall - Non Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Abrasion and impact resistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
76mm Thin Wall Heatshrink, reduces to 38.1mm, 25 Pack - Black
XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is a chemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
20mm Thin Wall Heatshrink, reduces to 9.5mm, 5m - Clear XLP - Heatshrink - Thin Wall - Non Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Abrasion and impact resistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
20mm Thin Wall Heatshrink, reduces to 9.5mm, 5m - Red XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
20mm Thin Wall Heatshrink, reduces to 9.5mm, 5m - Blue XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
13mm Thin Wall Heatshrink, reduces to 6.4mm, 5m - Clear XLP - Heatshrink - Thin Wall - Non Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Abrasion and impact resistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
13mm Thin Wall Heatshrink, reduces to 6.4mm, 5m - Red XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
13mm Thin Wall Heatshrink, reduces to 6.4mm, 5m - Blue
XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
13mm Thin Wall Heatshrink, reduces to 6.4mm, 5m - Black
XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
7mm Thin Wall Heatshrink, reduces to 3.2mm, 50 Pack - Clear XLP - Heatshrink - Thin Wall - Non Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Abrasion and impact resistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
7mm Thin Wall Heatshrink, reduces to 3.2mm, 50 Pack - Yellow XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
7mm Thin Wall Heatshrink, reduces to 3.2mm, 50 Pack - White XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
7mm Thin Wall Heatshrink, reduces to 3.2mm, 50 Pack - Red XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
7mm Thin Wall Heatshrink, reduces to 3.2mm, 50 Pack - Green XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
7mm Thin Wall Heatshrink, reduces to 3.2mm, 50 Pack - Blue XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
7mm Thin Wall Heatshrink, reduces to 3.2mm, 50 Pack - Black XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
5mm Thin Wall Heatshrink, reduces to 2.4mm, 100 Pack - Clear XLP - Heatshrink - Thin Wall - Non Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Abrasion and impact resistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
5mm Thin Wall Heatshrink, reduces to 2.4mm, 100 Pack - Yellow XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
5mm Thin Wall Heatshrink, reduces to 2.4mm, 100 Pack - White XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
5mm Thin Wall Heatshrink, reduces to 2.4mm, 100 Pack - Red XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
5mm Thin Wall Heatshrink, reduces to 2.4mm, 100 Pack - Green XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
5mm Thin Wall Heatshrink, reduces to 2.4mm, 100 Pack - Blue XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
38mm Thin Wall Heatshrink, reduces to 19.1mm, 25 Pack - Clear XLP - Heatshrink - Thin Wall - Non Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Abrasion and impact resistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
38mm Thin Wall Heatshrink, reduces to 19.1mm, 25 Pack - Yellow
XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
38mm Thin Wall Heatshrink, reduces to 19.1mm, 25 Pack - White
XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
38mm Thin Wall Heatshrink, reduces to 19.1mm, 25 Pack - Red
XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
38mm Thin Wall Heatshrink, reduces to 19.1mm, 25 Pack - Green
XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
38mm Thin Wall Heatshrink, reduces to 19.1mm, 25 Pack - Blue
XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
27/07
|
38mm Thin Wall Heatshrink, reduces to 19.1mm, 25 Pack - Black
XLP - Heatshrink - Thin Wall - Flame Retarded
XLP tubing is achemically cross-linked tubing that conforms toMIL-1-23053/5 class 3. It will withstand -75 Cto 135 C for normal operating conditions and 200*C for short intervals. Black tubing withstands ultraviolet radiation. Tubing can easily be shrunk with a heat gun or a heat tunnel. All tubings in this range are flame-retarded except clear, which is flammable and conforms to MIL-1-23053/5 class 2.
* Highly flexible.
* Flame retarded.
* Abrasion and impactr esistant.
* For use in all electrical and electronic applications.
XLP tubing has numerous uses in the electrical and associated industries, including insulation, colour coding and mechanical protection.
Compliant Standards: UL224 VW1 File No. E197423
Conformant Standards: MIL-1-23053/5; JIS
Material: Chemically, cross-linked, thermallystabilised flame retarded polyolefin
Continuous operating temp: -75 C to +135 C
Shrinkage temp: > 100 C
Longitudinal shrinkage: < 5%
Tensile strength: 16 MPa
Breakdown voltage: 25 kV/mm wall thickness
Volume resistivity: 1.0 x 1014 ohm cm
Elongation at break point: 400%
Water absorption: 0.15% max
Flammability: Passed ASTM-D-2671
UV stability: Black tubing is stable
Voltage rating: 600V
|
|
|
|
Previous Page
|
Next Page
|
|
