Techtronics product archive #40009
| Image |
Date |
Product description |
Price |
Buy |
|
17/07
|
Cabac VoltFinger Pouch to suit T7107A Cabac Voltfinger Pouch
Suitable for T7107A
|
|
|
|
17/07
|
Generic Zip Tube - 93-26mm Application Range RWSM - Heatshrink - Wrap-Arounds/Zipper Tube
RWSM zipper tube is a cross-linkedpolyolefin heatshrink tube which isfolded around the cable, zipped upwith a stainless steel channel and thenshrunk.
= Cable repair without cutting the cable.
= Ideal for in situ field installation.
= Jointing in tight areas.
= Re-entering a joint with minimaldisruption, unlike epoxy joint.
= 100% waterproof and low waterabsorption.
= Quick start up time, after completingjoint.
= Repair of unpressurised pipes.
= Non meltable.
= Resistant to decay, chemicals, corrosion.
Installation recommendations arevirtually the same as for SMDW.When applying heat, check thatcarbonisation or crazing does notoccur and do not apply heat directlyonto the stainless steel channel. Whenshrinkage has been completed, thestippled effect on the tube surface willnot be noticeable since thermochroicpaint has changed colour.
Catalogue
No. |
Recommended
Application Range |
D |
W |
L |
Max
(mm) |
Max
(mm) |
Pre Shrink(mm) |
After Shrink(mm) |
After Shrink(mm) |
Standard
Lengths(m) |
| RWSM43/12TK |
43 |
12 |
52 |
12 |
2.3 |
1 |
| RWSM52/10TK |
52 |
10 |
55 |
18 |
3.0 |
1 |
| RWSM76/22TK |
76 |
18 |
82 |
18 |
3.0 |
1 |
| RWSM93/26TK |
93 |
26 |
105 |
26 |
2.3 |
1 |
| RWSM115/30TK |
115 |
30 |
130 |
30 |
2.3 |
1 |
| RWSM 125/32TK |
125 |
32 |
143 |
32 |
2.3 |
1 |
| RWSM139/38TK |
139 |
38 |
160 |
38 |
2.5 |
1 |
Technical DataConformant Standards IEC; VDE; DIN Material Cross-linked polyolefin with hot meltadhesive lining & stainless steel channel Continuous operating temp -40 C to +110 C Shrinkage temp Starts 105 C, completed 125 C Tensile strength 17 MPa (excluding channel) Elongation at break point 350% (excluding channel) Longitudinal shrinkage 10% Breakdown voltage 12 kV/mm wall thickness Volume resistivity 1.0 x 1016 ohm cm Water absorption 0.1% Flammability Do not use in flame prone areas UV resistance Passed ISO 1408
|
|
|
|
17/07
|
Generic Zip Tube - 76-22mm Application Range RWSM - Heatshrink - Wrap-Arounds/Zipper Tube
RWSM zipper tube is a cross-linkedpolyolefin heatshrink tube which isfolded around the cable, zipped upwith a stainless steel channel and thenshrunk.
= Cable repair without cutting the cable.
= Ideal for in situ field installation.
= Jointing in tight areas.
= Re-entering a joint with minimaldisruption, unlike epoxy joint.
= 100% waterproof and low waterabsorption.
= Quick start up time, after completingjoint.
= Repair of unpressurised pipes.
= Non meltable.
= Resistant to decay, chemicals, corrosion.
Installation recommendations arevirtually the same as for SMDW.When applying heat, check thatcarbonisation or crazing does notoccur and do not apply heat directlyonto the stainless steel channel. Whenshrinkage has been completed, thestippled effect on the tube surface willnot be noticeable since thermochroicpaint has changed colour.
Catalogue
No. |
Recommended
Application Range |
D |
W |
L |
Max
(mm) |
Max
(mm) |
Pre Shrink(mm) |
After Shrink(mm) |
After Shrink(mm) |
Standard
Lengths(m) |
| RWSM43/12TK |
43 |
12 |
52 |
12 |
2.3 |
1 |
| RWSM52/10TK |
52 |
10 |
55 |
18 |
3.0 |
1 |
| RWSM76/22TK |
76 |
18 |
82 |
18 |
3.0 |
1 |
| RWSM93/26TK |
93 |
26 |
105 |
26 |
2.3 |
1 |
| RWSM115/30TK |
115 |
30 |
130 |
30 |
2.3 |
1 |
| RWSM 125/32TK |
125 |
32 |
143 |
32 |
2.3 |
1 |
| RWSM139/38TK |
139 |
38 |
160 |
38 |
2.5 |
1 |
Technical DataConformant Standards IEC; VDE; DIN Material Cross-linked polyolefin with hot meltadhesive lining & stainless steel channel Continuous operating temp -40 C to +110 C Shrinkage temp Starts 105 C, completed 125 C Tensile strength 17 MPa (excluding channel) Elongation at break point 350% (excluding channel) Longitudinal shrinkage 10% Breakdown voltage 12 kV/mm wall thickness Volume resistivity 1.0 x 1016 ohm cm Water absorption 0.1% Flammability Do not use in flame prone areas UV resistance Passed ISO 1408
|
|
|
|
17/07
|
Generic Zip Tube - 52-10mm Application Range RWSM - Heatshrink - Wrap-Arounds/Zipper Tube
RWSM zipper tube is a cross-linkedpolyolefin heatshrink tube which isfolded around the cable, zipped upwith a stainless steel channel and thenshrunk.
= Cable repair without cutting the cable.
= Ideal for in situ field installation.
= Jointing in tight areas.
= Re-entering a joint with minimaldisruption, unlike epoxy joint.
= 100% waterproof and low waterabsorption.
= Quick start up time, after completingjoint.
= Repair of unpressurised pipes.
= Non meltable.
= Resistant to decay, chemicals, corrosion.
Installation recommendations arevirtually the same as for SMDW.When applying heat, check thatcarbonisation or crazing does notoccur and do not apply heat directlyonto the stainless steel channel. Whenshrinkage has been completed, thestippled effect on the tube surface willnot be noticeable since thermochroicpaint has changed colour.
Catalogue
No. |
Recommended
Application Range |
D |
W |
L |
Max
(mm) |
Max
(mm) |
Pre Shrink(mm) |
After Shrink(mm) |
After Shrink(mm) |
Standard
Lengths(m) |
| RWSM43/12TK |
43 |
12 |
52 |
12 |
2.3 |
1 |
| RWSM52/10TK |
52 |
10 |
55 |
18 |
3.0 |
1 |
| RWSM76/22TK |
76 |
18 |
82 |
18 |
3.0 |
1 |
| RWSM93/26TK |
93 |
26 |
105 |
26 |
2.3 |
1 |
| RWSM115/30TK |
115 |
30 |
130 |
30 |
2.3 |
1 |
| RWSM 125/32TK |
125 |
32 |
143 |
32 |
2.3 |
1 |
| RWSM139/38TK |
139 |
38 |
160 |
38 |
2.5 |
1 |
Technical DataConformant Standards IEC; VDE; DIN Material Cross-linked polyolefin with hot meltadhesive lining & stainless steel channel Continuous operating temp -40 C to +110 C Shrinkage temp Starts 105 C, completed 125 C Tensile strength 17 MPa (excluding channel) Elongation at break point 350% (excluding channel) Longitudinal shrinkage 10% Breakdown voltage 12 kV/mm wall thickness Volume resistivity 1.0 x 1016 ohm cm Water absorption 0.1% Flammability Do not use in flame prone areas UV resistance Passed ISO 1408
|
|
|
|
17/07
|
Generic Zip Tube - 43-12mm Application Range RWSM - Heatshrink - Wrap-Arounds/Zipper Tube
RWSM zipper tube is a cross-linkedpolyolefin heatshrink tube which isfolded around the cable, zipped upwith a stainless steel channel and thenshrunk.
= Cable repair without cutting the cable.
= Ideal for in situ field installation.
= Jointing in tight areas.
= Re-entering a joint with minimaldisruption, unlike epoxy joint.
= 100% waterproof and low waterabsorption.
= Quick start up time, after completingjoint.
= Repair of unpressurised pipes.
= Non meltable.
= Resistant to decay, chemicals, corrosion.
Installation recommendations arevirtually the same as for SMDW.When applying heat, check thatcarbonisation or crazing does notoccur and do not apply heat directlyonto the stainless steel channel. Whenshrinkage has been completed, thestippled effect on the tube surface willnot be noticeable since thermochroicpaint has changed colour.
Catalogue
No. |
Recommended
Application Range |
D |
W |
L |
Max
(mm) |
Max
(mm) |
Pre Shrink(mm) |
After Shrink(mm) |
After Shrink(mm) |
Standard
Lengths(m) |
| RWSM43/12TK |
43 |
12 |
52 |
12 |
2.3 |
1 |
| RWSM52/10TK |
52 |
10 |
55 |
18 |
3.0 |
1 |
| RWSM76/22TK |
76 |
18 |
82 |
18 |
3.0 |
1 |
| RWSM93/26TK |
93 |
26 |
105 |
26 |
2.3 |
1 |
| RWSM115/30TK |
115 |
30 |
130 |
30 |
2.3 |
1 |
| RWSM 125/32TK |
125 |
32 |
143 |
32 |
2.3 |
1 |
| RWSM139/38TK |
139 |
38 |
160 |
38 |
2.5 |
1 |
Technical DataConformant Standards IEC; VDE; DIN Material Cross-linked polyolefin with hot meltadhesive lining & stainless steel channel Continuous operating temp -40 C to +110 C Shrinkage temp Starts 105 C, completed 125 C Tensile strength 17 MPa (excluding channel) Elongation at break point 350% (excluding channel) Longitudinal shrinkage 10% Breakdown voltage 12 kV/mm wall thickness Volume resistivity 1.0 x 1016 ohm cm Water absorption 0.1% Flammability Do not use in flame prone areas UV resistance Passed ISO 1408
|
|
|
|
17/07
|
Generic Zip Tube - 139-38mm Application Range RWSM - Heatshrink - Wrap-Arounds/Zipper Tube
RWSM zipper tube is a cross-linkedpolyolefin heatshrink tube which isfolded around the cable, zipped upwith a stainless steel channel and thenshrunk.
= Cable repair without cutting the cable.
= Ideal for in situ field installation.
= Jointing in tight areas.
= Re-entering a joint with minimaldisruption, unlike epoxy joint.
= 100% waterproof and low waterabsorption.
= Quick start up time, after completingjoint.
= Repair of unpressurised pipes.
= Non meltable.
= Resistant to decay, chemicals, corrosion.
Installation recommendations arevirtually the same as for SMDW.When applying heat, check thatcarbonisation or crazing does notoccur and do not apply heat directlyonto the stainless steel channel. Whenshrinkage has been completed, thestippled effect on the tube surface willnot be noticeable since thermochroicpaint has changed colour.
Catalogue
No. |
Recommended
Application Range |
D |
W |
L |
Max
(mm) |
Max
(mm) |
Pre Shrink(mm) |
After Shrink(mm) |
After Shrink(mm) |
Standard
Lengths(m) |
| RWSM43/12TK |
43 |
12 |
52 |
12 |
2.3 |
1 |
| RWSM52/10TK |
52 |
10 |
55 |
18 |
3.0 |
1 |
| RWSM76/22TK |
76 |
18 |
82 |
18 |
3.0 |
1 |
| RWSM93/26TK |
93 |
26 |
105 |
26 |
2.3 |
1 |
| RWSM115/30TK |
115 |
30 |
130 |
30 |
2.3 |
1 |
| RWSM 125/32TK |
125 |
32 |
143 |
32 |
2.3 |
1 |
| RWSM139/38TK |
139 |
38 |
160 |
38 |
2.5 |
1 |
Technical DataConformant Standards IEC; VDE; DIN Material Cross-linked polyolefin with hot meltadhesive lining & stainless steel channel Continuous operating temp -40 C to +110 C Shrinkage temp Starts 105 C, completed 125 C Tensile strength 17 MPa (excluding channel) Elongation at break point 350% (excluding channel) Longitudinal shrinkage 10% Breakdown voltage 12 kV/mm wall thickness Volume resistivity 1.0 x 1016 ohm cm Water absorption 0.1% Flammability Do not use in flame prone areas UV resistance Passed ISO 1408
|
|
|
|
17/07
|
Generic Zip Tube - 125-32mm Application Range RWSM - Heatshrink - Wrap-Arounds/Zipper Tube
RWSM zipper tube is a cross-linkedpolyolefin heatshrink tube which isfolded around the cable, zipped upwith a stainless steel channel and thenshrunk.
= Cable repair without cutting the cable.
= Ideal for in situ field installation.
= Jointing in tight areas.
= Re-entering a joint with minimaldisruption, unlike epoxy joint.
= 100% waterproof and low waterabsorption.
= Quick start up time, after completingjoint.
= Repair of unpressurised pipes.
= Non meltable.
= Resistant to decay, chemicals, corrosion.
Installation recommendations arevirtually the same as for SMDW.When applying heat, check thatcarbonisation or crazing does notoccur and do not apply heat directlyonto the stainless steel channel. Whenshrinkage has been completed, thestippled effect on the tube surface willnot be noticeable since thermochroicpaint has changed colour.
Catalogue
No. |
Recommended
Application Range |
D |
W |
L |
Max
(mm) |
Max
(mm) |
Pre Shrink(mm) |
After Shrink(mm) |
After Shrink(mm) |
Standard
Lengths(m) |
| RWSM43/12TK |
43 |
12 |
52 |
12 |
2.3 |
1 |
| RWSM52/10TK |
52 |
10 |
55 |
18 |
3.0 |
1 |
| RWSM76/22TK |
76 |
18 |
82 |
18 |
3.0 |
1 |
| RWSM93/26TK |
93 |
26 |
105 |
26 |
2.3 |
1 |
| RWSM115/30TK |
115 |
30 |
130 |
30 |
2.3 |
1 |
| RWSM 125/32TK |
125 |
32 |
143 |
32 |
2.3 |
1 |
| RWSM139/38TK |
139 |
38 |
160 |
38 |
2.5 |
1 |
Technical DataConformant Standards IEC; VDE; DIN Material Cross-linked polyolefin with hot meltadhesive lining & stainless steel channel Continuous operating temp -40 C to +110 C Shrinkage temp Starts 105 C, completed 125 C Tensile strength 17 MPa (excluding channel) Elongation at break point 350% (excluding channel) Longitudinal shrinkage 10% Breakdown voltage 12 kV/mm wall thickness Volume resistivity 1.0 x 1016 ohm cm Water absorption 0.1% Flammability Do not use in flame prone areas UV resistance Passed ISO 1408
|
|
|
|
17/07
|
Cabac 304 Stainless Steel Strap ToolCABSTRAPTOOL
Heavy duty tensioning and cutting tool for
the stainless steel straps 9.5 to 19.0mm wide.
|
|
|
|
17/07
|
Cabac 9.5mm Stainless Steel 304SS Strap - 30m CABAC stainless steel strapping system a quick and effective way of securing or clamping items.
Typical uses are securing cables to poles,signs to poles, switch boards, pipes etc.
= The strap has a high clamping force, which attaches things verysecurely, giving long term stability
= The strap is made from 304 series stainless steel, which can withstandextreme acidity, alkalinity and highly corrosive environments. As such iscan be used in chemical, food, hospital, dairies and power generation
= The strap is hard to cut or undo which means items are securelyfastened
= Stainless 304 is non magnetic
= Standard reels are 30m
Installation of CABSTRAP is simple using the CABSTRAPTOOL,which will tension the strap and cut it off, giving a clean finish.
Stainless Steel Strap 304
| Catalogue No |
Dimension |
Reel Length |
| inches |
Metric (mm) |
| CABSTRAP9.5 |
3/8 x .025 |
9.5 x 0.63 |
30 |
| CABSTRAP12.7 |
1/2 x .030 |
12.7 x 0.76 |
30 |
| CABSTRAP15.8 |
5/8 x .030 |
15.8 x 0.76 |
30 |
| CABSTRAP19.0 |
3/4 x .030 |
19.0 x 0.76 |
30 |
Stainless Steel Buckles 304
| Catalogue No |
Strap Width |
Box |
| Inches |
Metric (mm) |
| CABBUCKLE9.5 |
3/8 |
9.5 |
100 |
| CABBUCKLE12.7 |
1/2 |
12.7 |
100 |
| CABBUCKLE15.8 |
5/8 |
15.8 |
100 |
| CABBUCKLE19.0 |
3/4 |
19.0 |
100 |
Technical DataMaterial Stainless Steel 304 grade Yield strength 205MPa Operating temp -80 C to +500 C Loop tensile strength Heavy duty range 110kg Resistance to chemicalsHigh resistance to: Petrol Benzene Alcohol Acetone Sodium hydroxide Sodium phosphate Formic acid Acetic acid Sulphuric acid/dilute Seawater In general very resistant to most hostile environments.
|
|
|
|
17/07
|
Cabac 31.7mm Stainless Steel 304SS Strap - 30m CABAC stainless steel strapping system a quick and effective way of securing or clamping items.
Typical uses are securing cables to poles,signs to poles, switch boards, pipes etc.
= The strap has a high clamping force, which attaches things verysecurely, giving long term stability
= The strap is made from 304 series stainless steel, which can withstandextreme acidity, alkalinity and highly corrosive environments. As such iscan be used in chemical, food, hospital, dairies and power generation
= The strap is hard to cut or undo which means items are securelyfastened
= Stainless 304 is non magnetic
= Standard reels are 30m
Installation of CABSTRAP is simple using the CABSTRAPTOOL,which will tension the strap and cut it off, giving a clean finish.
Stainless Steel Strap 304
| Catalogue No |
Dimension |
Reel Length |
| inches |
Metric (mm) |
| CABSTRAP9.5 |
3/8 x .025 |
9.5 x 0.63 |
30 |
| CABSTRAP12.7 |
1/2 x .030 |
12.7 x 0.76 |
30 |
| CABSTRAP15.8 |
5/8 x .030 |
15.8 x 0.76 |
30 |
| CABSTRAP19.0 |
3/4 x .030 |
19.0 x 0.76 |
30 |
Stainless Steel Buckles 304
| Catalogue No |
Strap Width |
Box |
| Inches |
Metric (mm) |
| CABBUCKLE9.5 |
3/8 |
9.5 |
100 |
| CABBUCKLE12.7 |
1/2 |
12.7 |
100 |
| CABBUCKLE15.8 |
5/8 |
15.8 |
100 |
| CABBUCKLE19.0 |
3/4 |
19.0 |
100 |
Technical DataMaterial Stainless Steel 304 grade Yield strength 205MPa Operating temp -80 C to +500 C Loop tensile strength Heavy duty range 110kg Resistance to chemicalsHigh resistance to: Petrol Benzene Alcohol Acetone Sodium hydroxide Sodium phosphate Formic acid Acetic acid Sulphuric acid/dilute Seawater In general very resistant to most hostile environments.
|
|
|
|
17/07
|
Cabac 25.4mm Stainless Steel 304SS Strap - 30m CABSTRAP
CABAC stainless steel strapping system a quick and effective way of securing or clamping
items. Typical uses are securing cables to poles,signs to poles, switch boards, pipes
etc.
• The strap has a high clamping force, which attaches things very securely, giving long
• term stability
• The strap is made from 304 series stainless steel, which can withstand extreme acidity,
• alkalinity and highly corrosive environments. As such it can be used in chemical, food,
• hospital, dairies and power generation
• The strap is hard to cut or undo which means items are securely fastened
• Stainless 304 is non magnetic
• Standard reels are 30m
Installation of CABSTRAP is simple using the CABSTRAPTOOL,which will tension the
strap and cut it off, giving a clean finish.
Material Stainless Steel 304 grade
Yield strength 205MPa
Operating temp -80 C to +500 C
Loop tensile strength Heavy duty range 110kg
Resistance to chemicals
High resistance to:
Petrol
Benzene
Alcohol
Acetone
Sodium hydroxide
Sodium phosphate
Formic acid
Acetic acid
Sulphuric acid/dilute
Seawater
In general very resistant to most hostile environments.
Stainless Steel Strap 304
Stainless Steel Buckles 304
|
|
|
|
17/07
|
Cabac 19.0mm Stainless Steel 304SS Strap - 30m CABAC 19.0MM S/STEEL 304SS STRAP 30M
CABSTRAP
CABAC stainless steel strapping system a quick and effective way of securing or clamping items.
Typical uses are securing cables to poles,signs to poles, switch boards, pipes etc.
= The strap has a high clamping force, which attaches things verysecurely, giving long term stability
= The strap is made from 304 series stainless steel, which can withstandextreme acidity, alkalinity and highly corrosive environments. As such iscan be used in chemical, food, hospital, dairies and power generation
= The strap is hard to cut or undo which means items are securelyfastened
= Stainless 304 is non magnetic
= Standard reels are 30m
Installation of CABSTRAP is simple using the CABSTRAPTOOL,which will tension the strap and cut it off, giving a clean finish.
Stainless Steel Strap 304
| Catalogue No |
Dimension |
Reel Length |
| inches |
Metric (mm) |
| CABSTRAP9.5 |
3/8 x .025 |
9.5 x 0.63 |
30 |
| CABSTRAP12.7 |
1/2 x .030 |
12.7 x 0.76 |
30 |
| CABSTRAP15.8 |
5/8 x .030 |
15.8 x 0.76 |
30 |
| CABSTRAP19.0 |
3/4 x .030 |
19.0 x 0.76 |
30 |
Stainless Steel Buckles 304
| Catalogue No |
Strap Width |
Box |
| Inches |
Metric (mm) |
| CABBUCKLE9.5 |
3/8 |
9.5 |
100 |
| CABBUCKLE12.7 |
1/2 |
12.7 |
100 |
| CABBUCKLE15.8 |
5/8 |
15.8 |
100 |
| CABBUCKLE19.0 |
3/4 |
19.0 |
100 |
Technical DataMaterial Stainless Steel 304 grade Yield strength 205MPa Operating temp -80 C to +500 C Loop tensile strength Heavy duty range 110kg Resistance to chemicalsHigh resistance to: Petrol Benzene Alcohol Acetone Sodium hydroxide Sodium phosphate Formic acid Acetic acid Sulphuric acid/dilute Seawater In general very resistant to most hostile environments.
|
|
|
|
17/07
|
Cabac 15.8mm Stainless Steel 304SS Strap - 30m CABAC 15.8MM S/STEEL 304SS STRAP 30M
CABSTRAP
CABAC stainless steel strapping system a quick and effective way of securing or clamping items.
Typical uses are securing cables to poles,signs to poles, switch boards, pipes etc.
= The strap has a high clamping force, which attaches things verysecurely, giving long term stability
= The strap is made from 304 series stainless steel, which can withstandextreme acidity, alkalinity and highly corrosive environments. As such iscan be used in chemical, food, hospital, dairies and power generation
= The strap is hard to cut or undo which means items are securelyfastened
= Stainless 304 is non magnetic
= Standard reels are 30m
Installation of CABSTRAP is simple using the CABSTRAPTOOL,which will tension the strap and cut it off, giving a clean finish.
Stainless Steel Strap 304
| Catalogue No |
Dimension |
Reel Length |
| inches |
Metric (mm) |
| CABSTRAP9.5 |
3/8 x .025 |
9.5 x 0.63 |
30 |
| CABSTRAP12.7 |
1/2 x .030 |
12.7 x 0.76 |
30 |
| CABSTRAP15.8 |
5/8 x .030 |
15.8 x 0.76 |
30 |
| CABSTRAP19.0 |
3/4 x .030 |
19.0 x 0.76 |
30 |
Stainless Steel Buckles 304
| Catalogue No |
Strap Width |
Box |
| Inches |
Metric (mm) |
| CABBUCKLE9.5 |
3/8 |
9.5 |
100 |
| CABBUCKLE12.7 |
1/2 |
12.7 |
100 |
| CABBUCKLE15.8 |
5/8 |
15.8 |
100 |
| CABBUCKLE19.0 |
3/4 |
19.0 |
100 |
Technical DataMaterial Stainless Steel 304 grade Yield strength 205MPa Operating temp -80 C to +500 C Loop tensile strength Heavy duty range 110kg Resistance to chemicalsHigh resistance to: Petrol Benzene Alcohol Acetone Sodium hydroxide Sodium phosphate Formic acid Acetic acid Sulphuric acid/dilute Seawater In general very resistant to most hostile environments.
|
|
|
|
17/07
|
Cabac 12.7mm Stainless Steel 304SS Strap - 30m CABAC 12.7MM S/STEEL 304SS STRAP 30M
CABSTRAP
CABAC stainless steel strapping system a quick and effective way of securing or clamping items.
Typical uses are securing cables to poles,signs to poles, switch boards, pipes etc.
= The strap has a high clamping force, which attaches things verysecurely, giving long term stability
= The strap is made from 304 series stainless steel, which can withstandextreme acidity, alkalinity and highly corrosive environments. As such iscan be used in chemical, food, hospital, dairies and power generation
= The strap is hard to cut or undo which means items are securelyfastened
= Stainless 304 is non magnetic
= Standard reels are 30m
Installation of CABSTRAP is simple using the CABSTRAPTOOL,which will tension the strap and cut it off, giving a clean finish.
Stainless Steel Strap 304
| Catalogue No |
Dimension |
Reel Length |
| inches |
Metric (mm) |
| CABSTRAP9.5 |
3/8 x .025 |
9.5 x 0.63 |
30 |
| CABSTRAP12.7 |
1/2 x .030 |
12.7 x 0.76 |
30 |
| CABSTRAP15.8 |
5/8 x .030 |
15.8 x 0.76 |
30 |
| CABSTRAP19.0 |
3/4 x .030 |
19.0 x 0.76 |
30 |
Stainless Steel Buckles 304
| Catalogue No |
Strap Width |
Box |
| Inches |
Metric (mm) |
| CABBUCKLE9.5 |
3/8 |
9.5 |
100 |
| CABBUCKLE12.7 |
1/2 |
12.7 |
100 |
| CABBUCKLE15.8 |
5/8 |
15.8 |
100 |
| CABBUCKLE19.0 |
3/4 |
19.0 |
100 |
Technical DataMaterial Stainless Steel 304 grade Yield strength 205MPa Operating temp -80 C to +500 C Loop tensile strength Heavy duty range 110kg Resistance to chemicalsHigh resistance to: Petrol Benzene Alcohol Acetone Sodium hydroxide Sodium phosphate Formic acid Acetic acid Sulphuric acid/dilute Seawater In general very resistant to most hostile environments.
|
|
|
|
17/07
|
Cabac 9.5mm Stainless Steel 304SS Buckle - 100 Pack CABAC 9.5MM S/STEEL 304SS BUCKLE 100 PK
CABAC stainless steel strapping system a quick and effective way of securing or clamping items.
Typical uses are securing cables to poles,signs to poles, switch boards, pipes etc.
= The strap has a high clamping force, which attaches things verysecurely, giving long term stability
= The strap is made from 304 series stainless steel, which can withstandextreme acidity, alkalinity and highly corrosive environments. As such iscan be used in chemical, food, hospital, dairies and power generation
= The strap is hard to cut or undo which means items are securelyfastened
= Stainless 304 is non magnetic
= Standard reels are 30m
Installation of CABSTRAP is simple using the CABSTRAPTOOL,which will tension the strap and cut it off, giving a clean finish.
Stainless Steel Strap 304
| Catalogue No |
Dimension |
Reel Length |
| inches |
Metric (mm) |
| CABSTRAP9.5 |
3/8 x .025 |
9.5 x 0.63 |
30 |
| CABSTRAP12.7 |
1/2 x .030 |
12.7 x 0.76 |
30 |
| CABSTRAP15.8 |
5/8 x .030 |
15.8 x 0.76 |
30 |
| CABSTRAP19.0 |
3/4 x .030 |
19.0 x 0.76 |
30 |
Stainless Steel Buckles 304
| Catalogue No |
Strap Width |
Box |
| Inches |
Metric (mm) |
| CABBUCKLE9.5 |
3/8 |
9.5 |
100 |
| CABBUCKLE12.7 |
1/2 |
12.7 |
100 |
| CABBUCKLE15.8 |
5/8 |
15.8 |
100 |
| CABBUCKLE19.0 |
3/4 |
19.0 |
100 |
Technical DataMaterial Stainless Steel 304 grade Yield strength 205MPa Operating temp -80 C to +500 C Loop tensile strength Heavy duty range 110kg Resistance to chemicalsHigh resistance to: Petrol Benzene Alcohol Acetone Sodium hydroxide Sodium phosphate Formic acid Acetic acid Sulphuric acid/dilute Seawater In general very resistant to most hostile environments.
|
|
|
|
17/07
|
Cabac 31.7mm Stainless Steel 304SS Buckle - 100 Pack CABSTRAP
CABAC stainless steel strapping system a quick and effective way of securing or clamping
items. Typical uses are securing cables to poles,signs to poles, switch boards, pipes
etc.
• The strap has a high clamping force, which attaches things very securely, giving long
• term stability
• The strap is made from 304 series stainless steel, which can withstand extreme acidity,
• alkalinity and highly corrosive environments. As such it can be used in chemical, food,
• hospital, dairies and power generation
• The strap is hard to cut or undo which means items are securely fastened
• Stainless 304 is non magnetic
• Standard reels are 30m
Installation of CABSTRAP is simple using the CABSTRAPTOOL,which will tension the
strap and cut it off, giving a clean finish.
Material Stainless Steel 304 grade
Yield strength 205MPa
Operating temp -80 C to +500 C
Loop tensile strength Heavy duty range 110kg
Resistance to chemicals
High resistance to:
Petrol
Benzene
Alcohol
Acetone
Sodium hydroxide
Sodium phosphate
Formic acid
Acetic acid
Sulphuric acid/dilute
Seawater
In general very resistant to most hostile environments.
Stainless Steel Strap 304
Stainless Steel Buckles 304
|
|
|
|
17/07
|
Cabac 25.4mm Stainless Steel 304SS Buckle - 100 Pack CABSTRAP
CABAC stainless steel strapping system a quick and effective way of securing or clamping
items. Typical uses are securing cables to poles,signs to poles, switch boards, pipes
etc.
• The strap has a high clamping force, which attaches things very securely, giving long
• term stability
• The strap is made from 304 series stainless steel, which can withstand extreme acidity,
• alkalinity and highly corrosive environments. As such it can be used in chemical, food,
• hospital, dairies and power generation
• The strap is hard to cut or undo which means items are securely fastened
• Stainless 304 is non magnetic
• Standard reels are 30m
Installation of CABSTRAP is simple using the CABSTRAPTOOL,which will tension the
strap and cut it off, giving a clean finish.
Material Stainless Steel 304 grade
Yield strength 205MPa
Operating temp -80 C to +500 C
Loop tensile strength Heavy duty range 110kg
Resistance to chemicals
High resistance to:
Petrol
Benzene
Alcohol
Acetone
Sodium hydroxide
Sodium phosphate
Formic acid
Acetic acid
Sulphuric acid/dilute
Seawater
In general very resistant to most hostile environments.
Stainless Steel Strap 304
Stainless Steel Buckles 304
|
|
|
|
17/07
|
Cabac 19.0mm Stainless Steel 304SS Buckle - 100 Pack CABAC 19.0MM S/STEEL 304SS BUCKLE 100 PK
CABAC stainless steel strapping system a quick and effective way of securing or clamping items.
Typical uses are securing cables to poles,signs to poles, switch boards, pipes etc.
= The strap has a high clamping force, which attaches things verysecurely, giving long term stability
= The strap is made from 304 series stainless steel, which can withstandextreme acidity, alkalinity and highly corrosive environments. As such iscan be used in chemical, food, hospital, dairies and power generation
= The strap is hard to cut or undo which means items are securelyfastened
= Stainless 304 is non magnetic
= Standard reels are 30m
Installation of CABSTRAP is simple using the CABSTRAPTOOL,which will tension the strap and cut it off, giving a clean finish.
Stainless Steel Strap 304
| Catalogue No |
Dimension |
Reel Length |
| inches |
Metric (mm) |
| CABSTRAP9.5 |
3/8 x .025 |
9.5 x 0.63 |
30 |
| CABSTRAP12.7 |
1/2 x .030 |
12.7 x 0.76 |
30 |
| CABSTRAP15.8 |
5/8 x .030 |
15.8 x 0.76 |
30 |
| CABSTRAP19.0 |
3/4 x .030 |
19.0 x 0.76 |
30 |
Stainless Steel Buckles 304
| Catalogue No |
Strap Width |
Box |
| Inches |
Metric (mm) |
| CABBUCKLE9.5 |
3/8 |
9.5 |
100 |
| CABBUCKLE12.7 |
1/2 |
12.7 |
100 |
| CABBUCKLE15.8 |
5/8 |
15.8 |
100 |
| CABBUCKLE19.0 |
3/4 |
19.0 |
100 |
Technical DataMaterial Stainless Steel 304 grade Yield strength 205MPa Operating temp -80 C to +500 C Loop tensile strength Heavy duty range 110kg Resistance to chemicalsHigh resistance to: Petrol Benzene Alcohol Acetone Sodium hydroxide Sodium phosphate Formic acid Acetic acid Sulphuric acid/dilute Seawater In general very resistant to most hostile environments.
|
|
|
|
17/07
|
Cabac 15.8mm Stainless Steel 304SS Buckle - 100 Pack CABAC 15.8MM S/STEEL 304SS BUCKLE 100 PK
CABAC stainless steel strapping system a quick and effective way of securing or clamping items.
Typical uses are securing cables to poles,signs to poles, switch boards, pipes etc.
= The strap has a high clamping force, which attaches things verysecurely, giving long term stability
= The strap is made from 304 series stainless steel, which can withstandextreme acidity, alkalinity and highly corrosive environments. As such iscan be used in chemical, food, hospital, dairies and power generation
= The strap is hard to cut or undo which means items are securelyfastened
= Stainless 304 is non magnetic
= Standard reels are 30m
Installation of CABSTRAP is simple using the CABSTRAPTOOL,which will tension the strap and cut it off, giving a clean finish.
Stainless Steel Strap 304
| Catalogue No |
Dimension |
Reel Length |
| inches |
Metric (mm) |
| CABSTRAP9.5 |
3/8 x .025 |
9.5 x 0.63 |
30 |
| CABSTRAP12.7 |
1/2 x .030 |
12.7 x 0.76 |
30 |
| CABSTRAP15.8 |
5/8 x .030 |
15.8 x 0.76 |
30 |
| CABSTRAP19.0 |
3/4 x .030 |
19.0 x 0.76 |
30 |
Stainless Steel Buckles 304
| Catalogue No |
Strap Width |
Box |
| Inches |
Metric (mm) |
| CABBUCKLE9.5 |
3/8 |
9.5 |
100 |
| CABBUCKLE12.7 |
1/2 |
12.7 |
100 |
| CABBUCKLE15.8 |
5/8 |
15.8 |
100 |
| CABBUCKLE19.0 |
3/4 |
19.0 |
100 |
Technical DataMaterial Stainless Steel 304 grade Yield strength 205MPa Operating temp -80 C to +500 C Loop tensile strength Heavy duty range 110kg Resistance to chemicalsHigh resistance to: Petrol Benzene Alcohol Acetone Sodium hydroxide Sodium phosphate Formic acid Acetic acid Sulphuric acid/dilute Seawater In general very resistant to most hostile environments.
|
|
|
|
17/07
|
Cabac 12.7mm Stainless Steel 304SS Buckle - 100 Pack
CABSTRAPCABAC stainless steel strapping system a quick and effective way of securing or clamping items. Typical uses are securing cables to poles, signs to poles, switch boards, pipes etc.
= The strap has a high clamping force, which attaches things verysecurely, giving long term stability
= The strap is made from 304 series stainless steel, which can withstandextreme acidity, alkalinity and highly corrosive environments. As such iscan be used in chemical, food, hospital, dairies and power generation
= The strap is hard to cut or undo which means items are securelyfastened
= Stainless 304 is non magnetic
= Standard reels are 30m
Installation of CABSTRAP is simple using the CABSTRAPTOOL,which will tension the strap and cut it off, giving a clean finish.
CABAC stainless steel strapping system a quick and effective way of securing or clamping items.
Typical uses are securing cables to poles,signs to poles, switch boards, pipes etc.
= The strap has a high clamping force, which attaches things verysecurely, giving long term stability
= The strap is made from 304 series stainless steel, which can withstandextreme acidity, alkalinity and highly corrosive environments. As such iscan be used in chemical, food, hospital, dairies and power generation
= The strap is hard to cut or undo which means items are securelyfastened
= Stainless 304 is non magnetic
= Standard reels are 30m
Installation of CABSTRAP is simple using the CABSTRAPTOOL,which will tension the strap and cut it off, giving a clean finish.
Stainless Steel Strap 304
| Catalogue No |
Dimension |
Reel Length |
| inches |
Metric (mm) |
| CABSTRAP9.5 |
3/8 x .025 |
9.5 x 0.63 |
30 |
| CABSTRAP12.7 |
1/2 x .030 |
12.7 x 0.76 |
30 |
| CABSTRAP15.8 |
5/8 x .030 |
15.8 x 0.76 |
30 |
| CABSTRAP19.0 |
3/4 x .030 |
19.0 x 0.76 |
30 |
Stainless Steel Buckles 304
| Catalogue No |
Strap Width |
Box |
| Inches |
Metric (mm) |
| CABBUCKLE9.5 |
3/8 |
9.5 |
100 |
| CABBUCKLE12.7 |
1/2 |
12.7 |
100 |
| CABBUCKLE15.8 |
5/8 |
15.8 |
100 |
| CABBUCKLE19.0 |
3/4 |
19.0 |
100 |
Technical DataMaterial Stainless Steel 304 grade Yield strength 205MPa Operating temp -80 C to +500 C Loop tensile strength Heavy duty range 110kg Resistance to chemicalsHigh resistance to: Petrol Benzene Alcohol Acetone Sodium hydroxide Sodium phosphate Formic acid Acetic acid Sulphuric acid/dilute Seawater In general very resistant to most hostile environments.
|
|
|
|
Previous Page
|
Next Page
|
|
