Waterproof cap to suit P 9364 and P 9366.

IP67 rated waterproof 2, 4 and 6 pin connectors for installations outdoors or in areas prone to moisture build up. 2 pin rated at 5A. 4 & 6 pin rated at 2A.

Cable Entry: 4.5-6.5mm

IP67 rated waterproof 2, 4 and 6 pin connectors for installations outdoors or in areas prone to moisture build up. 2 pin rated at 5A. 4 & 6 pin rated at 2A.

IP67 rated waterproof 2, 4 and 6 pin connectors for installations outdoors or in areas prone to moisture build up. 2 pin rated at 5A. 4 & 6 pin rated at 2A.

IP67 rated waterproof 2, 4 and 6 pin connectors for installations outdoors or in areas prone to moisture build up. 2 pin rated at 5A. 4 & 6 pin rated at 2A.

Cable Entry: 4.5-6.5mm

IP67 rated waterproof 2, 4 and 6 pin connectors for installations outdoors or in areas prone to moisture build up. 2 pin rated at 5A. 4 & 6 pin rated at 2A.

Cable Entry: 4.5-6.5mm

IP67 rated waterproof 2, 4 and 6 pin connectors for installations outdoors or in areas prone to moisture build up. 2 pin rated at 5A. 4 & 6 pin rated at 2A.

Cable Entry: 4.5-6.5mm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Reel of 5000

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm

SMD 1% Metal Film Resistor. Pack of 10

 

Features

• High grade thick film metal glazed ceramic body • Suitable for reflow or hand soldering • Temperature range -55° to +125°C • Temperature co-efficient ±100 ppm/°C • Tolerance ±1% • 0.100W rated

NOTE:

Please note different part numbers for OEM reels. Please contact us for OEM reel pricing.

SMD Resistor Value Markings:

• 0603 series Our range of 0603 resistors use a combination of normal 3 digit marking and the EIA-96 marking system. The normal 3 digit marking is identified by 3 digits, the first 2 digits are the value followed by the multiplier, or number of zeros. ie. 333 printed on the resistor equates to 33 + three zeros = 33,000 Ohm or 33K Ohm (1% markings are the same as 5% markings). The EIA-96 marking used for selected values is as per the table above. • 0805 & 1206 series Identified by a 4 digit figure, the first 3 digits are the value followed by the multiplier, or number of zeros. ie. 1503 printed on the resistor equates to 150 + three zeros = 150,000Ohm or 150KOhm