|
Techtronics Components products from Generic
| Image |
Product description |
Price |
Buy |
|
Generic 2SC2500B NPN epitaxial TO-92 High DC current gain 5 Pack :: 2SC2500B 2SC2500B NPN epitaxial TO-92 High DC current gain 5 Pack 
|
|
|
|
Generic RE6236 1000uF 63V RB Electrolytic Capacitor - 105 Degree C :: RE6236
Value: 1000uFWorking Voltage: 63VLead Spacing: 7.5mmSize dia x H: 16 x 26Ripple Current mA: 1400Rated Temperature: 105 Degrees C Mounting: RB - PC Mount
|
|
|
|
Generic Timer IC - NE555, 5 pieces NE555P :: NE555PX5+NE555P Timer IC 8 Pin What is the difference between NE555N and NE555P? NE555N VS NE555P - The E555N generally operates within a voltage range of 4.5V to 15V. This range makes it suitable for a wide range of low to moderate voltage applications. The NE555P has a slightly broader operating voltage range, typically from 4.5V to 18V. - Timing From Microseconds to Hours
- Astable or Monostable Operation
- Adjustable Duty Cycle
- TTL-Compatible Output Can Sink or Source
Up to 200 mA - On Products Compliant to MIL-PRF-38535,
All Parameters Are Tested Unless Otherwise Noted. On All Other Products, Production Processing Does Not Necessarily Include
Testing of All Parameters.
These devices are precision timing circuits capable of producing accurate time delays or oscillation. In the time-delay or mono-stable mode of operation, the timed interval is controlled by a single external resistor and capacitor network. In the a-stable mode of operation, the frequency and duty cycle can be controlled independently with two external resistors and a single external capacitor. The threshold and trigger levels normally are two-thirds and one-third, respectively, of VCC. These levels can be altered by use of the control-voltage terminal. When the trigger input falls below the trigger level, the flip-flop is set, and the output goes high. If the trigger input is above the trigger level and the threshold input is above the threshold level, the flip-flop is reset and the output is low. The reset (RESET) input can override all other inputs and can be used to initiate a new timing cycle. When RESET goes low, the flip-flop is reset, and the output goes low. When the output is low, a low-impedance path is provided between discharge (DISCH) and ground. The output circuit is capable of sinking or sourcing current up to 200 mA. Operation is specified for supplies of 5 V to 15 V. With a 5-V supply, output levels are compatible with TTL inputs. |
|
|
|
