This Evacuation controller is easy to operate and is designed
around industry standard building emergency alert/evacuate requirements.
When connected to a paging system amplifier, building occupants can be
alerted and/or evacuated in the event of an emergency e.g.: fire, gas
leak, bomb scare, earthquake. Auto or manual modes are selected by the
front panel key switch which uses an industry standard 003 key. Alert
&evac switches are fitted with safety covers to prevent accidental
operation. Also inbuilt, is a Bell function tone for signalling lunch
breaks, start of class etc.
The Alert, Evacuation, Bell, Fire Test and Fire tones and Emergency
Messages are all MP3 based and stored on a Micro SD card which is
accessible from the rear of the unit. The Alert, Evacuation and bell
tones and cancel function are triggered by the front switches when in
manual mode or by the rear terminal contacts when in Auto mode for
remote activation i.e. a clock, remote switch or remote wall plate.
These functions can also be activated by optional wall plates and paging
consoles. The Fire tone is activated from the rear Fire trigger or from
the A 4597 remote plate. The Fire Test tone is activated by the A 4597
remote plate only.
Provision has been made for a BGM (background music) source to be
played through the controller. BGM is automatically muted when any other
function is operated. A mic input is provided on the front panel and
paging is also available through the A 4564 paging console. These can be
used for either general or emergency paging and overrides all other
functions. A pre-announcement chime is available on the microphone
input. This can be switched on or off via external dip switches.
Switched 24V Out connections are provided for all emergency and paging
conditions. These contacts are for connection of override relays in
remote volume controls, warning strobes, bells etc.
Package Contents
A 4565A Alert/Evacuation Controller
24V DC 2A Plugpack
Instruction Booklet
Features
- Tones conform to AS 1670.4
- Standard 1U 19 rack mount case
- Interfaces with Fire Indicator Boards
- Remote operation of Alert, Evac, Chime, Fire Test, Fire Alarm &Cancel tones
- MP3 based tone playback (with backup hard coded Alert, Evac and Bell tones)
- 24V DC operation
- Auto/Manual/Isolate keyswitch
- Key switch to 003 standard
- Local operation of Alert, Evac and PA
- MP3 based Voice Over messages for Alert and Evac cycles
- Microphone socket for PA use
- Provision for BGM (back ground music)
- Provision for Auxiliary input with front volume control
- Bell chime facility
- Switched 24V DC output for override relays on volume controls
- Switched 24V DC output for strobe operation for Alert mode
- Switched 24V DC output for strobe operation for Evac mode
- Switched 24VDC output for bell mode
- On-board timer for automatic Alert to Evac switchover, adjustable from 30secs to 7.5min in 30 second increments
- Externally operated inputs are activated by switching to ground
- Auxiliary level output
- Suitable for any amplifier with an auxiliary input
- 10 Year Warranty
- Australian Designed and Manufactured
100% developed, designed &assembled in Australia.
Since 1976 Redback PA products have been manufactured in Perth,
Western Australia by Altronics. With over 40 years experience in the
commercial audio industry, we offer consultants, installers and end
users reliable products of high build quality with local product
support. Read more about our Australian Made products
Backed by an industry leading 10 Year Manufacturer Warranty.
Our Redback products have a long tried and tested history of
bulletproof reliability. Altronics offers a 10 Year Warranty on all
Australian Made Redback products. Our local in-house service department
has all the know how to answer technical queries and provide timely
service. Read more about our industry leading warranty.