These 30VA transformers will fit inside our 1 Unit 19" rack cases.
AS/NZS 61558.2.6 Approval: Q050427
Certificate No.: CS 859/Q
Specifications
|
Primary voltage: 240V AC Regulation: Better than 10% Maximum temperature rise: 75°C Dielectric strength: 4000V for 1 Minute Insulation class: Class B (130deg.C) Sec. Parallel: 2A Sec. Series: 1A |
Features
|
• Each toroidal is supplied with 2 x rubber spacing washers, 1 x steel dished washer, 1 x mounting bolt, 1 x nut (except PCB mount versions). • Lower electrically induced noise demanded by compact equipment. • High efficiency enabling conservative rating whilst maintaining size advantages. • The toroidal transformer is accepted as the industry standard, replacing the laminated type as toroidal transformers offer advantages in size, weight, and lower radiated field. • Energy authority certified
|
Wiring:
|
Secondary (SEC) Current A Current available where secondaries are connected in parallel.
Secondary (SEC) Current B Current available where secondaries are connected in series.
|
Dimensions:
|
D: 76 d: 21 H: 30 Tolerance: ± 2%
*Specifications subject to change without prior notice. Manufacturers please note, we recommend that a sample is obtained to confirm suitability
* Outside diameter D is given as a maximum value, inner diameter d is given
|
|
Note: Must be used with a 500mA external AC fuse.
|