Techtronics Test Equipment products from NoBrand
Image Product description Price Buy
NoBrand D3020

Combination DMM/LAN Cable Tester :: D3020


Includes all the features of a standard digital multimeter with the addition of a LAN tester. This is the perfect ‘all-in-one’ solution for network installers & IT technicians. The multimeter is an auto ranging design measuring current, voltage & resistance. Includes a max reading recall function, plus data hold. The LAN tester features dual RJ45 sockets on top for quick testing of ethernet patch leads. A remote terminator permits testing of installed cables in buildings & patch panels. The LAN tester quickly confirms the integrity of each conductor by way of the LED indicators. Suitable for both RJ45/RJ11 & BNC coaxial cabling (adaptor leads included). Supplied with rubber holster, carry case, network
adaptors and high quality silicon rubber test probes.

Features
• Autoranging multimeter
• Will test 10Base-T, 10Base-2, RJ45/11, 258A, TIA 568A/568B and Token Ring
• Includes RJ & BNC network lead adaptors
• Auto power off
• Supplied with test probe leads & carry case
• Battery included
• Cat II 1000V & Cat III 600V

Specifications
DC voltage: 200mV, 2V, 20V, 200V, 600V
AC voltage:2V, 20V, 200V, 600V
DC current: 200µA, 2000µA, 20mA, 200mA
AC current: 200µA, 2000µA, 20mA, 200mA
Resistance: 200, 2k, 20k, 200k, 2M, 20M Ohm
Continuity: < 150 Ohm, Audible tone
Diode test: 1mA max
Display: 3.5 digit LCD, 2000 count, backlit
Dimensions: ˜ 75W x 44D x 162H mm (excluding remote terminator)

Link to product page    $79.95
NoBrand K2543

Digital Audio Oscillator Kit - 10Hz to 30kHz, Requires 9V Battery :: K2543

(SC June ‘09) Provides an adjustable 10Hz to 30kHz output in sine, square, triangle and sawtooth waveforms for testing amplifiers, speakers and other audio devices. Three output ranges: 20mV, 200mV & 1V. Requires 9V battery.
Link to product page    $80.10
NoBrand P9181

Replacement IC Test Clip - Black :: P9181

Overall length 57mm. With solder connection for wire termination. 1A @ 250V AC.
Link to product page    $1.40
NoBrand P9180

Replacement IC Test Clip - Red :: P9180

Overall length 57mm. With solder connection for wire termination. 1A @ 250V AC.
Link to product page    $1.40
NoBrand P0417

Multimeter SMD Test Probe Tweezers - CatII Approved, 1000V, 2A :: P0417


Identify those impossible to read SMD components! A handheld tweezer ‘plug in’ adaptor to suit just about any DMM. Permits on board or
standalone testing of surface mount devices including resistors, capacitors, diodes, inductors etc (dependant on DMM functionality). 450mm
length. Ideal for R&D, service centres, prototyping etc. Cat II 1000V 2A.

Link to product page    $17.20
NoBrand P0407

Pro Grade Banana To Test Pin Leads - Cat3 Approved, 1000V, 10A :: P0407


Superb construction for long life. Soft silicon rubber sheath & handles. Cat 3 1KV 10A approved.

Link to product page    $26.20
NoBrand P0411

Banana Plugs to IC Clips Test Lead Set :: P0411

Economical replacement test leads. Quality banana to various ends to suit most multimeters and test equipment.
Banana to IC Test Clip
Link to product page    $7.95
NoBrand P0408

Insulation Piercing Test Probe :: P0408

Pierces insulation for accurate measurement without cutting cables.
Link to product page    $26.20
NoBrand P0413

Universal Test Lead Set - Includes 4x Croc Clips, 2x Pin Plugs, 2x Hand Probes, 4x Banana Plugs, 2x Fork Connectors :: P0413

Includes 2 leads which are ready to accept a range of screw-on fittings.
Set includes: 4 x Croc Clips 2 x Pin Plugs 2 x Hand Probes 4 x Banana Plugs 2 x Fork Connectors
Link to product page    $11.50
NoBrand P0415

Heavy Duty Croc to Croc Jumper Lead Set - Pack of 10 :: P0415

Handy test leads. Pack of 10. Contains 2 each of red, white, black, green, yellow.
Link to product page    $7.40
NoBrand P0406

Pro Grade Banana to Test Pin Leads :: P0406

Shrouded banana plugs and soft silicon rubber construction. Cat 3 1KV 10A approved. Strain relief at both ends for long service life. Test pins have a unique banana plug end allowing them to be plugged into test equipment easily.
Link to product page    $18.35
NoBrand P0400

Economy Banana To Croc Clip Silicon Leads :: P0400

Shrouded banana plugs and soft silicon rubber construction for long service life. Includes screw on croc-clips.
Link to product page    $16.25
NoBrand Q3005

Earth Leakage Detector


- Provide Instant Feedback for Installing Power Points, enabling fast Verification of Correct Wiring :: Q3005
This device is designed to test a 240V mains power point for correct operation, plus simulate an earth leakage condition to test the Earth Leakage Circuit Breaker (ELCB) or Residual Current Device (RCD) protecting that power point. It provides ELCB/RCD trip testing at 10, 15, 30 and 100mA. Neon indicators provide instant feedback for electricians installing power points, enabling fast verification of correct wiring configuration.
Link to product page    $31.35
NoBrand Q3002

Non Contact AC Test Probe & LED Torch :: Q3002

This handy AC non contact tester is a great addition to any toolbox. It detects live AC voltages from 100V to 600V (50-60Hz). Easy operation allows detection of live wires without contact. Whenever AC is detected at a power point, sheathed or bare ended cable, the tester will light up red. This provides an instant indication of which cables or power outlets have lethal high AC voltages present. Operating with mains voltages without a tester such as this can be dangerous. An essential test tool for the electrical tradesperson, fitter, technician or anyone operating with AC power sources.

Compact design fits right in your pocket and includes handy LED light torch.

Features:
• AC Voltage detection without contact from 70-600VAC
• DC polarity check 1.5V-36VDC
• In-built LED light for working in dark areas
• CAT III 1000V rated
• Dimensions 176 x 26mmŲ
Link to product page    $20.85
NoBrand Q1520

True RMS Benchtop Multimeter :: Q1520

For serious service departments and circuit development a dedicated benchtop precision digital multimeter is invaluable. The Q 1520 is a professional instrument with a large, easy to read 5999 count backlit LCD display. Includes USB & RS- 232 interfaces and software for interface to a PC. Has a host of features including frequency counter, data hold, min/max display and capacitance
measurement. Operates from 240V mains power or internal batteries (not included). Supplied with test leads, temperature probe adaptor, USB and RS-232 leads, which all store neatly in the top of the unit. The case features a built-in stand/handle for ease of transport when you need to go mobile.

Features:
• True RMS mode
• 5999 count LCD
• RS-232 and USB interface to PC
• Windows software supplied
• Large back lit display
• Battery or mains power
• MAX/MIN display modes
• Transistor tester
• Frequency counter to 50MHz
• Capacitance measurement
• Temperature mode (°C/°F)
• Continuity and diode test
• Sleep mode
• Fused 10A input
• Data hold and run mode
• Low battery indicator
• Overload protection
• USB & RS-232 cables included

Specifications:
DC voltage: 600mV, 6V, 60V, 600V, 1000V
AC voltage: 600mV, 6V, 60V, 600V, 1000V
DC current: 600µA, 6mA, 60mA, 600mA, 10A
AC current: 600µA, 6mA, 60mA, 600mA, 10A
Resistance: 600Ω, 6kΩ, 60kΩ, 600kΩ, 6MΩ, 60MΩ
Frequency: 10Hz to 50MHz
Capacitance: 6nF, 60nF, 600nF, 6µF, 60µF, 600µF, 6mF
Continuity: Audible tester
Diode test: Included
Temperature: -40°C - ˜1000°C (-40°F - ˜1832°F)
Protection: 500mA fuse on mA, 10A fuse on 10A
Dimensions: ≈ 240W x 310D x 105H

Link to product page    $407.55
NoBrand Q1350

Cable Tracer - Tri-Colour LED Display :: Q1350

This cable tracer is perfect for locating faulty wiring or conversely confirming correct wiring. The unit consists of two parts. The first part is the tone generator. This is connected to one end of the cable by the test leads provided. The generator can transmit either a single or dual tone signal. The second part is the probe. This is used to identify the other end of the cable. To do this you simply probe around in the area you suspect. The probe will sniff out the appropriate cable, even in a bunch of cables. When it detects the signal transmitted by the generator in the correct cable it emits an audible tone. The generator can also be used to check cable continuity, identify cable faults, determine line polarity and voltage in network and modular telephone lines.

Features
• Single or dual tone signal
• 3 mode of operation
• Tricolour LED for telephone line polarity, continuity and voltage testing
• In built test leads, croc clips and 4 pin RJ11
Link to product page    $183.75
NoBrand Q1244

Autoranging Insulation Tester - 1000V, Backlit LCD Readout :: Q1244


Insulation testers measure the electrical insulation strength between two conductors by applying a high voltage across them and measuring any current that flows. This is to test for “leakage” paths and insulation breakdown in electrical circuits. eg checking house wiring for leakage between active and neutral conductors or testing electrical appliances such as toasters, irons, electric motors etc. Capable of measuring between 2MO and 2000MO at 250, 500 and 1000V. Also includes AC voltage, resistance range, auto power off and LCD backlight. Provided with three high voltage test leads, two test probes and one large croc clip lead. Housed in a robust plastic case and includes a soft protective carry case.

Features
• 2MO - 2000MO range
• AC voltage and resistance
• Backlit LCD readout
• “Push to test” activation
• Auto power off
• Tough plastic casing, plus soft carry case
• High quality test probes
• Batteries included
• Cat II 600V

Specifications
Insulation test range: 2M Ohm - 2000M Ohm
Test voltage: 250V, 500V, 1000V
Resistance: 200 Ohm
AC Voltage: 700V
Continuity: 50 Ohm threshold, audible tone
Display: 3.5 digit, 1999 count
Battery 6 x AA
Dimensions: 110W x 168L x 65H mm

Link to product page    $195.45
NoBrand Q1536

Digital Frequency Counter - 100MHz to 2.7Ghz, 8 Digit LED Display :: Q1536

When servicing electronic equipment, it is sometimes required to monitor the frequency of internal oscillators, frequency references or your own input test signals. This multiple-function counter covers a frequency range of 10Hz to 2.7GHz in two ranges with separate inputs; Ch A 10Hz to 100MHz and Ch B 100MHz to 2.7GHz. The wide frequency range makes it suitable for servicing and calibrating RF equipment such as radio mics, CB and amateur transceivers. It features an eight digit LED display, low power consumption circuit design, full input signal conditioning and a highly stabilised crystal oscillator for accurate measurement. The easy to use front panel push buttons make range selection and identification a breeze. Includes BNC to croc clip test lead.New wider bandwidth model at a new low price for 2007!

Features:
• Easy to read 8 digit LED display
• High input sensitivity
• Period, frequency and pulse count functions
• Push button frequency/period and range switching
• BNC input connector Ch 1
• SMA input connector Ch 2
• x20 input attenuator
• Display hold function
• Low pass internal filter (100kHz, Ch 1)
2 YEAR WARRANTY

Speicifications:
Frequency measurements
Channel 1
Input Connector: BNC
Range: 10Hz to 10MHz, 10MHz to 100MHz
Resolution: 1, 10, 100Hz selectable
Pre-scaled: 10, 100, 1000Hz selectable
Gate time: 0.01s, 0.1s,1s selectable
Channel 2
Input Connector: SMA (SMA to BNC adaptor included)
Range: 100MHz to 2.7GHz
Resolution: 100Hz, 1kHz, 10kHz selectable
Gate time: 0.01s, 0.1s, 1s selectable
Period measurements (Channel 1)
Range: 10Hz to 10MHz
Channel 1
Input sensitivity: 75mV RMS (10Hz - 8MHz), 30mV rms (8MHz to 2.4GHz) 75mV (2.4GHz to 2.7GHz)
Attenuation: x1 or 1/20 selectable
Filter (CH. 1 only: Low pass 100kHz
Input impedance Ch 1: ≈1MΩ with <35pF shunt
Input impedance Ch 2: 50Ω
Max input voltage Ch 1: 250V DC, 250V AC RMS (set attenuator to 1/20)
Max input voltage Ch 2: 3V
General
Power requirements: 240V AC
Dimensions: ≈230W x 260D x 80H mm
Weight: ≈3.6kg

Link to product page    $271.95
NoBrand Q1542

Pocket Size Audio Signal Generator - 20Hz to 150kHz in 46 Presets :: Q1542

A highly useful pocket sized signal generator for on-site servicing of audio equipment or for service bench use. Generates sine and square waveforms in 46 preset frequencies from 20Hz to 150kHz in two ranges (x1 and x100). Adjustable amplitude up to 8V peak to peak on square wave or 1.2V RMS on sine wave. Output impedance 600O for direct driving most audio equipment eg amplifiers, mixers etc. Also features a Sync output for triggering an oscilloscope. Includes test leads. Requires 9V battery (not supplied).

A must have piece of test equipment for mobile audio techs, installers or engineers!

Features:
• 20Hz to 150kHz in 46 presets
• Sine or square wave output
• Adjustable amplitude
• Oscilloscope sync output
• Compact size
• Includes test leads

Specifications:
Frequencies (x1 Range): 20, 28, 32, 42, 50, 64, 75, 80, 100, 120, 150, 180, 200, 280
320, 420, 500, 640, 750, 800, 1k, 1.2k, 1.5kHz
Frequencies (x100 Range): 2k, 2.8k, 3.2k, 4.2k, 5k, 6.4k, 7.5k, 8.0k, 10k,12k, 15k, 18k
20k, 28k, 32k, 42k, 50k, 64k, 75k, 80k, 100k, 120k, 150kHz
Output Impedance: 600Ω
Waveform: sinusoidal or square wave switchable
Output Amplitude (Sine): 1.2V RMS
Output Amplitude (Square): 8V peak to peak
Rise & Fall Time: > 5µs
Dimensions: ˜ W x D x H

Link to product page    $99.95
NoBrand Q1562

Professional Function Generator - 3MHz Frequency Counter :: Q1562


One of the most versatile pieces of test equipment you can own. It provides a consistent waveform output, useful for checking response of audio circuits etc. This digital function generator has an in-built frequency counter, as well as functioning as a standard waveform generator with sinusoidal, triangle and square wave outputs. DC offset adjustment allows the waveform to be shifted above or below 0V. Output amplitude is adjustable from 0 to 10V p-p via front panel control, with a switchable -20dB attenuator. Output frequency is adjustable between 0.03Hz to 3MHz via front panel rotary dial over seven ranges. It has an external sync output for synchronising other test equipment to the signal generator, such as CROs and logic probes. This allows observation of phase shifts relative to the signal generator output. It also features a 3 MHz 4 digit frequency counter with external BNC counter input. A self calibration mode ensures excellent accuracy at all times.

Features
• Sine, square & triangle waveforms
• External TTL sync output
• Tilt bail arm handle for bench stand angle adjustment
• High brightness seven segment LED displays
• BNC input/output connectors
• Push button range and waveform switching
• 3 MHz frequency counter
• External voltage controlled frequency

Specifications
Output
Frequency range: ...........................0.3Hz to 3MHz
Accuracy: .....................................±5% (at 3MHz position)
Amplitude: ....................................=10V p-p
Attenuator: ...................................-20dB ±1dB
Impedance: ..................................50 ohm ±5%
Sine Wave
Flatness: .....................................<0.3dB (0.3Hz - 300kHz), <0.5dB (300kHz - 3MHz)
Distortion: ....................................=1% (0.3Hz - 200kHz) =35dB below fundamental in all ranges.
Square Wave
Rise / fall time: .............................100ns or less
Symmetry variation: ......................±2% (0.3Hz - 200kHz)
Triangle Wave
Linearity:......................................98% or more to 100KHz
Frequency Counter
Range:.........................................0.3Hz - 3MHz
Accuracy: ...................................Time base accuracy ± 1 count
Time base: ..................................±20ppm
Resolution: ..................................10Hz up to 1Hz. 0.1Hz up to 100MHz
Input impedance: .........................1MO
CMOS output level:.......................4V p-p (±1V) / 14.5V p-p (±0.5V)
TTL output level: ..........................=3V p-p, fan out 20 TTL load
VCF input voltage: .......................0-10V ±1V (100 : 1)
VCF input impedance:..................10kO ±10%
General
Power requirements:....................240V AC
Dimensions:................................251W x 291D x 91H mm
Weight:.......................................˜ 2kg

Link to product page    $481.80
NoBrand Q2010

Pocket LED Tester :: Q2010


This nifty LED tester allows quick and easy checking of LED operation and comparison of brightness and colour at different current ratings. Five output currents are available, 2, 5, 10, 20 and 50mA. Simply insert the LED legs into the appropriate current for your chosen LED, pull the lever and watch it light up! A toolbox essential for service technicians, designers and enthusiasts alike! Requires a 9V battery.

This nifty LED tester allows quick and easy checking of LED operation and comparison of brightness and colour at different current ratings. Five output currents are available, 2, 5, 10, 20 and 50mA. Simply insert the LED legs into the appropriate current for your chosen LED, pull the lever and watch it light up! A toolbox essential for service technicians, designers and enthusiasts alike! Requires a 9V battery.

Link to product page    $22.95
NoBrand Q1266

Pocket Sound Pressure Level Meter - 40 to 130dB :: Q1266


Compact pocket sized SPL meter for general purpose sound level measurement. The wide 40 to 130dB range is ideal for occupational health and safety testing in venues, industrial environments, car audio and home theatres. Fast response time with min/max function. LCD backlight switches on automatically when working in dark areas. Includes threaded insert on rear for tripod mounting. Auto power off.

Specifications
Ranges: 40-130dB
Resolution: ±0.1dB
Freq. range: 31.5Hz - 8000Hz
Freq. weighting: A
Accuracy: ±3.5dB
Microphone: Electret condenser
Battery: 9V (included)
Dimensions: 130H x 52W x 32D mm

Link to product page    $39.95
NoBrand Q0966

Ture RMS AC/DC Clamp Metetr - Up to 600A AC/DC Current :: Q0966

This rugged & versatile autoranging digital clamp meter quickly and accurately measures the current flowing through an individual conductor. Simply clamp the jaws around the conductor and the display reads the DC or AC current present, up to a massive 600A. Activating the Peak Hold button will display the highest current reading obtained during the test. Features a “one touch” zero adjustment for DC current measurement and Data Hold function to freeze the display while measuring. It also features autoranging AC/DC volts and current, resistance, temperature, capacitance ranges plus a diode and continuity test function. An essential piece of test gear for high voltage technicians, instrument fitters and other electrical tradespeople. Supplied with high quality test leads, temperature probe, and carry case.

Features:
Autoranging
Up to 600A AC or DC current
True RMS AC measurement
One touch zero function
33mm jaw opening
Auto power off
Peak hold function
High quality test leads
Temperature probe
Carry case
Battery included

Specifications:
DC voltage: 400mV, 4V, 40V, 400V, 600V
AC voltage: 4V, 40V, 400V, 600V
DC & AC current: 600A
Resistance:to 40M?
Continuity: 50? threshold, audible tone
Diode test:Test current 1mA max
Temperature:-20°C to 760°C
Capacitance:40nF to 100µF
Display:3.5 digit, 1999 count, backlit
Dimensions:˜ 80W x 43D x 204H mm

Link to product page    $198.00
NoBrand Q0964

Digital AC Clamp Meter - Up to 400A AC Current :: Q0964


Compact and durable, this digital clamp meter provides accurate AC current measurement up to 400A. Fits snugly into one hand with thumbwheel function selector allowing simple operation just about anywhere! Includes the functionality of a typical standard DMM but with the addition of a non contact AC voltage detector. Very useful when locating or working on live equipment. The hold button will freeze the display on the last measured reading. It also features autoranging AC/DC volts and current, resistance, temperature, capacitance ranges plus a diode and continuity test function. An essential piece of test gear for high voltage technicians, instrument fitters and other electrical trades people. Supplied with high quality test leads, temperature probe and poromeric carry case

Features
• Autoranging
• Non contact AC voltage detection
• Up to 400A AC current
• Auto power off
• Hold function
• Quality test leads
• Easy one handed operation
• Temperature probe
• Carry case
• Battery included
• Cat III 600V

Specifications
DC voltage: ....................400mV, 4V, 40V, 400V, 600V
AC voltage:.....................4V, 40V, 400V, 600V
AC current: ....................400A
Resistance:....................400O, 4kO, 40kO, 400kO, 4MO, 40MO
Continuity: .....................Audible tone
Diode test: .....................Test current 0.3mA typical
Temperature: ..................-20°C to 760°C
Capacitance: ..................40nF, 400nF, 4µF, 40µF, 100µF
Display: .........................4 digit LCD, 4000 count, backlit
Dimensions:....................˜ 60W x 30D x 195H mm.

Compact and durable, this digital clamp meter provides accurate AC current measurement up to 400A. Fits snugly into one hand with thumbwheel function selector allowing simple operation just about anywhere! Includes the functionality of a typical standard DMM but with the addition of a non contact AC voltage detector. Very useful when locating or working on live equipment. The hold button will freeze the display on the last measured reading. It also features autoranging AC/DC volts and current, resistance, temperature, capacitance ranges plus a diode and continuity test function. An essential piece of test gear for high voltage technicians, instrument fitters and other electrical trades people. Supplied with high quality test leads, temperature probe and poromeric carry case.

Features:
• Autoranging
• Non contact AC voltage detection
• Up to 400A AC current
• Auto power off
• Hold function
• Quality test leads
• Easy one handed operation
• Temperature probe
• Carry case
• Battery included
• Cat III 600V


DC voltage: 400mV, 4V, 40V, 400V, 600V
AC voltage: 4V, 40V, 400V, 600V
AC current: 400A
Resistance: 400O, 4kO, 40kO, 400kO, 4MO, 40MO
Continuity: Audible tone
Diode test: Test current 0.3mA typical
Temperature: -20°C to 760°C
Capacitance: 40nF, 400nF, 4µF, 40µF, 100µF
Display: 4 digit LCD, 4000 count, backlit
Dimensions: ˜ 60W x 30D x 195H mm

Link to product page    $65.02
NoBrand Q2005

Audio Impedance Meter :: Q2005

Measuring a transformer with a standard multimeter will not give accurate results because it is measuring DC resistance, not AC. This invaluable unit has a whopping 30mm high, backlit display and is fantastic for checking transformers and speaker impedances. Applies a 30 second test tone signal upon activation of the “test” button. May also be locked in test mode for continuous tone. Supplied in a safety yellow plastic case to protect the unit when not in use. Requires 6 x AA batteries.

Specifications:
Measurement freq: 1kHz
Range: 20Ω, 200Ω, 2kΩ
Display: 3.5 digit LCD
Accuracy: ±2% reading, ±2 digits
Dimensions: ˜ 110W x 168L x 65H mm

Link to product page    $260.70
NoBrand Q0110

AC Current Clamp Meter - To Suit Q0101/Q0103 :: Q0110

AC clamp meter adaptor.
Link to product page    $137.00
NoBrand Q0109

Temperature Sensor - To Suit Q0101/Q0103 :: Q0109

Temperature sensor.
Link to product page    $68.95
NoBrand Q3200

Pocket Sized Battery Tester - 1.5V/9V :: Q3200

Handy pocket-size tester that checks the condition of AAA, AA, C, D, N and 9V batteries plus button cell lithium batteries. Gives an instant readout of battery condition - replace, weak or good. An extremely handy addition to the service bench or equipment hire department. Dead easy to use - checks batteries in seconds and saves messing around with DMMs and test leads!
Not suitable for 1.2V rechargeables.
Link to product page    $6.36
NoBrand Q1162

Automotive Multimeter w. Temperature Probe & Hold Function :: Q1162

This multimeter not only serves as a standard multimeter, but also provides a host of functions for servicing automobiles. It is perfect for the auto mechanic as well as those who regularly service and fix their own cars. It is an invaluable tool for keeping your car in top tune, general auto electric tasks and troubleshooting problems with ignition, fuel injection etc. Supplied with a protective rubber holster, quality test leads, temperature probe and inductive pickup (for RPM and pulse width measurements). Suitable for all engines from 2 to 10 cylinders, both 2 and 4 stroke.

Features:
Suits 2 & 4 stroke motors
RPM for 2 to 10 cylinders
Dwell angle measurement
Duty cycle percentage count
Pulse width timing
Temperature measurement
Frequency to 9.99MHz
Capacitance to 100µF
Resistance to 40MΩ
AC/DC voltage to 600V
AC/DC current to 10A
Data hold
Auto power off
Continuity buzzer
Overload protection
Battery included

Specifications:
DC voltage:400mV, 4V, 40V, 400V, 600V
AC voltage:400mV, 4V, 40V, 400V, 600V
DC current:400µA, 4000µA, 40mA, 400mA, 4A, 10A
AC current:400µA, 4000µA, 40mA, 400mA, 4A, 10A
Resistance:400Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ, 40MΩ
Capacitance:40nF, 400nF, 4µf, 40µf, 100µf
Continuity test:Threshold 30?
Temperature:-20°C to 760°C
RPM:600-4000rpm
600-12000 (x10 rpm)
Dwell angle:2, 3, 4, 5, 6, 8, 10
Duty cycle:0.1-99.9%
Frequency:0.001Hz-9.99MHz
Pulse width:0.1˜10ms
Display:3.5 digit, 4000 count
Protection:200mA fused on all inputs
except 10A range
Dimensions:˜ 92W x 38D x 195H mm

Link to product page    $127.40
NoBrand Q1127

Temperature Probe :: Q1127

Suitable for multimeters with a temperature range.

Specifications
Temperature Range: -20 to 1320°C
Tolerance: ±3%

Link to product page    $13.60
NoBrand Q1126

19 Range Mini Digital Multimeter w. Temperature Probe :: Q1126

A mini 3.5 digit digital multimeter with 19 ranges. Small enough to literally fit in a pocket, this multimeter is ideal for the trades person on the move, or for a student lab kit. Includes K-Type temperature probe, data hold function and switchable backlit display.

Features:
Display backlighting
Data hold function
Temperature measurement
Continuity buzzer
Transistor checker
10A DC current range
Rubber holster included

Specifications:
DC Voltage 200mV, 2000mV, 20V, 200V, 600V
AC Voltage 200V, 600V
DC Current 2000µA, 20mA, 200mA, 10A
Resistance 200 Ohm, 2000 Ohm, 20k Ohm, 200k Ohm, 2000k Ohm
Continuity Test Included
Temperature -20°C to 1370°C ±1%
Transistor Test Measures hFE
Display 3.5 digit, 1999 count
Protection 200mA Fused On All Inputs Except 10A Range
Dimensions 68W x 45D x 140H mm

Includes rubber holster & stand

Link to product page    $40.35
NoBrand Q1098

Digital Multimeter w. True RMS Mode & RS232 for PC Interface :: Q1098

With features including a 3.75 digit 4000 count display, auto ranging with analogue bar graph and a 10MHz frequency counter, this is undoubtedly the finest multimeter we have ever evaluated. With proper care this multimeter will last a lifetime, and is perfect for research and development, service work and general scientific measurement applications. Supplied complete with high quality silicon rubber leads, temperature probe and durable protective carry case.

Features:
• True RMS mode • Q 1098 features RS-232 interface to PC computer (software supplied for DOS and Windows) • Dual display for frequency, AC voltage and temperature • 10 Location memory • Time mode with alarm, clock and stop watch • MIN, MAX, AVG and relative modes • Decibel measurement • Capacitance and inductance measurement • Temperature mode (°C/°F) • Pulse signal injection function for logic and audible testing, etc • Continuity and diode test • Logic test • Auto power “off” and “keep on” mode • Fused 20A input • Warning buzzer sounds when leads are incorrectly inserted in the 20A current mode • Back lit display • Data hold and run mode • Low battery indication mode • Overload protection and safety design in compliance with UL 1244 and VDE0411 • Temperature probe included.

Specifications:

DC Voltage
Range 400mV, 4V, 40V, 400V, 1000V
Resolution 0.1mV, 1mV, 10mV, 100mV, 1V
Accuracy 0.5% +2 digits
AC Voltage
Range 400mV, 4V, 40V, 400V, 750V
Resolution 0.1mV, 1mV, 10mV, 100mV, 1V
Accuracy 1.5% +2 digits
DC Current
Range 400µA, 400mA, 20A
Resolution 0.1µA, 0.1mA, 0.01A
Accuracy 1% +2 digits
AC Current
Range 400µA, 400mA, 20A
Resolution 0.1µA, 0.1mA, 0.01A
Accuracy 1.5% +3 digits
Resistance
Range 400 Ohm, 4k Ohm, 40k Ohm, 400k Ohm, 4M Ohm, 40M Ohm
Resolution 0.1 Ohm, 1 Ohm, 10 Ohm, 100 Ohm
Accuracy 0.5% +2 digits
Frequency
Range 10kHz, 100kHz, 1MHz, 10MHz
Resolution 1Hz, 10Hz, 100Hz, 1kHz
Accuracy 0.01% +2 digits
Capacitance
Range 100µF
Resolution 0.01µF
Accuracy 3% +5 digits
Inductance
Range 0-20H, 20-50H, 50-100H
Resolution 0.01H all ranges
Accuracy 3% +5d, 5% +5d, 10% +5d
Temperature
Range -20°C - 1200°C (0°F - 2000°F)
Resolution 1°C /°F
Accuracy 3% +3d (10 - 350°C), 3% +5d(-20 - 10°C)
Decibels dBm
Range -25 dBm - +59 dBm
Resolution 0.01 dBm
Accuracy ±0.5 dBm
Logic Test 0.8V- 2.0V
Diode Test Test Voltage 3.3V Max
Continuity Test Less Than 100 Ohm
Signal Out (4.5V Sq Wave)2048Hz, 4096Hz, 8192Hz
Protection 250V/20A Fused
Dimensions 88W x 37D x 199H


Minimum PC Requirements
IBM Compatible 486 or greater
100Mhz processor
Requires RS232 COM port with 9 pin plug (or adaptor to suit)
Software provided for Windows 95/98

Windows 2000 software can be set to run as Windows 98
Software is NOT compatible with Windows XP

Link to product page    $245.45
NoBrand Q1088

Autoranging Waterproof Multimeter :: Q1088

A rugged multimeter rated to Ingress Protection (IP) 67 standard. Designed for marine, mining, industrial and outdoor environments, the unit is splashproof and fully sealed against dust ingress. Perfect for mobile service technicians, instrument techs, engineers and others working in harsh demanding environments that require a dependable and durable multimeter. Fitted with an impact absorbent rubber coating for added protection and robustness. Features a large, easy to read, 4000 count LCD with bargraph and backlighting. Has a comprehensive set of ranges and functions including data hold, min/max display, frequency counter, temperature, capacitance and up to 10A current range. Supplied complete with thermocouple and high quality silicon rubber test leads.

Splash and dust proof, rated to IP67! Perfect for use in harsh outdoor environments such as minesites and processing plants.

Features:
• IP67 splash and dust-proof
• 4000 count LCD
• Autoranging
• MAX/MIN display modes
• Frequency counter to 40MHz
• Capacitance measurement
• Fused 10A input
• Temperature mode (°C/°F)
• Continuity and diode test
• Auto power off
• Low battery indicator
• Data hold & run mode
• Display backlight
• Class 2 double insulation


Note: This unit looks similar to competitor's models being sold at a much cheaper price. The Q 1088 has many added features, including: 40MHz frequency counter, bar graph display, min/max hold & higher capacitance range.

Specifications:
DC & AC voltage: 400mV, 4V, 40V, 400V, 1000V
DC & AC current: 400µA, 4000µA, 40mA, 400mA, 10A
Resistance: 400Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ, 40MΩ
Frequency: 4kHz, 40kHz, 400kHz, 40MHz
Capacitance: 4nF, 40nF, 400nF, 4µF, 40µF, 400µF, 4mF, 40mF
Temperature: -20°C - ˜760°C (-4°F - ˜1400°F)
Diode test: Test voltage 3V max
Continuity test: Less than 35O
Protection: 250V/10A fused
Dimensions: ˜ 82W x 55D x 182H

Link to product page    $183.70
NoBrand Q1082

RS232 Interface Kit for Q1080 :: Q1082

Q 1082 Optically Isolated RS232 Interface This interface is perfect for converting your Q 1080 into a fully fledged Data Logger. It is very simple to setup and use with any PC running Windows 95/98. A unique feature of the kit is the optical interface which ensures the Q 1080 and PC it is connected to do not fail in the event of either device becoming faulty.
Link to product page    $28.70
NoBrand Q1079

Auto Ranging Multimeter w. USB Datalogger DMM :: Q1079


An autoranging multimeter featuring an optically isolated USB interface and Windows® software. The optical adaptor ensures the DMM is electrically isolated from the PC, so no damage can occur to the computer should there be a fault in the circuit under test. It also measures temperature, frequency, capacitance, AC/DC voltage & current up to 10A. Includes PC software, high quality rubber insulated test leads, temperature probe and is housed in a shock-proof rubber coated case. Data Acquisition: The USB interface and software allows you to log and store measurements for later analysis. This is particularly useful for monitoring the performance of battery chargers or dischargers, timed circuits or other quantities that change with time. Suits Windows® XP & Vista.

Features
• Auto ranging with override
• Auto power off
• USB Interface
• Duty cycle % range
• Data hold & relative modes
• Bar graph readout
• Continuity buzzer & diode check
• Battery included
• Cat II 1000V

Specifications
DC voltage: 400mV, 4V, 40V, 400V
AC voltage: 400mV, 4V, 40V, 400V, 750V
DC current: 400µA, 4000µA, 40mA, 400mA, 4A, 10A
AC current: 400µA, 4000µA, 40mA, 400mA, 4A, 10A
Resistance: 400, 4k, 40k, 400k, 4M, 40M Ohm
Frequency: 100Hz, 1000Hz, 10kHz, 100kHz, 1MHz, 30MHz
Duty Cycle: 0.1% to 99.9%
Capacitance: 40nF, 400nF, 4µF, 40µF, 200µF
Continuity: <50 Ohm, Audible tester
Diode test: Test Current ˜1mA
Temperature: -20°C to 400°C, 400°C to 1000°C
Display: 3.75 digit LCD, 4000 count
Dimensions: 95W x 48D x 192H mm

Link to product page    $93.30
NoBrand Q1067

28 Range Multimeter w. Holster :: Q1067

This meter features an extra large display making it very easy to read. It has a multitude of useful features including transistor tester, capacitor, frequency and temperature ranges. When a range is selected the correct test lead connections are indicated on the display. The auto power off feature switches the unit off after 30 minutes of inaction, saving battery power. The integral rubber holster makes this instrument perfect for the trades person's toolbox. Includes high quality test leads.

Features:
On-screen test lead connection prompts
Capacitance measurement
Frequency counter
Temperature measurement
Continuity checker
Resistance to 20M ohm
Diode check
Continuity buzzer
Transistor checker
Auto power off after 30 minutes
Massive 20A DC current range
Rubber holster included
Battery included

Specifications:
DC volts:200mV, 2V, 20V, 200V, 1000V
AC volts:2V, 20V, 200V, 1000V
DC amps:2mA, 200mA, 20A
AC amps:2mA, 200mA, 20A
Capacitance:2nF, 200nF, 100µF
Frequency counter:2kHz to 20kHz
Resistance:200?, 2k?, 20k?, 2M?, 20M?
Temperature:-40°C to 1000°C
Continuity:Audible Tester
Diode tester: Included
Transistor test: Measures hFE
Display:3.5 digit LCD, 1999 count
Protection:500mA M205 / 630mA 2AG fused, no fuse on 20A range
Dimensions: ˜86W x 43D x 180H mm

Link to product page    $82.50
NoBrand Q1055

Multimeter Carry Case 190x105x40 for Q1025, Q1066 & Q2000 :: Q1055

A Soft vinyl case to suit the Q 2000, Q 1025 , Q 1066 range of test equipment. Protect your test equipment investment.
Incorperates a carry handle.
Link to product page    $7.10
NoBrand Q1054

Multimeter Carry Case 135x83x40 for Q1121, Q1124, Q1126 & Q1140 :: Q1054

A soft vinyl case to suit the Q 1121, Q 1124, Q 1126 , Q 1132 and Q 1140 range of test equipment.
Enhance the life of your expensive test equipment. Features a carry strap handle.
Link to product page    $6.80
NoBrand Q1053A

19 Range Multimeter w. Transistor & Diode Test Function :: Q1053A

Featuring 19 ranges, this 3.5 digit multimeter offers an in-built hFE transistor and diode test function. This meter also offers many of the features of much more expensive
models but at the fraction of the cost. Perfect as a spare meter for the toolbox or work van.

Features:
Low battery indicator
Transistor tester
Current & voltage measurement
Diode tester
Battery included

Specifications:
DC voltage:200mV, 2V, 20V, 200V, 1000V
AC voltage:200V, 750V
DC current:200µA, 2mA, 20mA, 200mA, 10A
Resistance:200?, 2k?, 20k?, 200k?, 2M?
Diode test:Included
Transistor test:Measures hFE
Display:3.5 digit LCD, 1999 count
Protection:200mA M205 fused on all inputs
except 10A range
Dimensions:˜ 67W x 35D x 140H mm

Link to product page    $17.75

Techtronics Products
Newsletter
Signup here to receive our monthly newsletter.
Email Address: