Techtronics Audio Visual products from Resi-Linx
Image Product description Price Buy
Resi-Linx A1099

Resi-Linx Remote Control - To Suit Resi-Linx RL-BV1000 :: A1099

Link to product page    $14.35
Resi-Linx A1095

Resi-Linx RL-BV240A 4-Way Component AV UTP Balun - Built in IR Control :: A1095

Component video and digital/analogue audio balun transmitter with IR control. Allows the transmission of component video and digital/analogue audio signals to up to 4 TV's using 4 pair twisted cable.
Link to product page    $196.20
Resi-Linx A1067

Resi-Linx RL-ACC160 IR Emitter Shield - Pack of 2 :: A1067

These rubber cups cover the infra red emitters reducing signal interference from local remote controls.
Link to product page    $11.40
Resi-Linx A1057

Resi-Linx RL-RF380 Video IR Hub - 2 Input, 8 Output :: A1057

Distribute multiple AV signals to multiple TV screens.
These multi-channel modulators and associated accessories allow the distribution of stereo audio/video signals from a variety of sources. They enable AV signals from DVD, security camera, Pay TV etc to be transmitted over a single 75Ω coaxial cable. Each AV input can be assigned its own dedicated TV channel. It allows the connected sources to be viewed at multiple locations simultaneously, depending on the splitters used. Selecting the desired source is as simple as changing channels on your TV. The system also allows full control of the AV devices remotely via the A 1055 or A 1056 IR extender modules.
All RF connections on the system are made easy with industry standard F connectors.

Output RF splitters: Combines the output from the A 1046/48/50 and free to air TV antenna and splits the signal to multiple RF outputs. If infra-red is required in your system, it must include an A 1057 splitter. A 1061 & A 1062 may be used as local zone splitters, providing additional outputs where required.

Remote IR targets: Installed next to the TV screen. These devices connect in-line between the TV screen and the modulator/splitter and enables full remote control of the connected AV sources via the existing coaxial cable.

DC Blocking module: Required when connecting TV sets directly to the splitter module output without the use of the A 1055 IR target.

IR emitters: Connects to the A 1048/50 modulator to send control signals to the AV equipment. Single or dual “eye” versions available.
Link to product page    $215.70
Resi-Linx A1054

Resi-Linx RL-IR900 IR Emitter Dual Output :: A1054

Resilinx Part: RL-IR900

A 1054 single eye emitter may be connected to two emitter outputs simultaneously. Ideal for integrating an RF modulator system with an IR extender system, such as A 1041.
Link to product page    $31.45
Resi-Linx A1045

Resi-Linx RL-RF900 IR Injector Only - To Suit A1046/48/50 :: A1045

IR injector used to integrate Vcomm’s RL-IR500 (flat target A 1042) or RL-IR600 (tube target A 1044) into Vcomm’s RF IR Video Distribution System (Altronics part numbers, A 1046, A 1048 and A 1050). Provides more visually pleasing, easily placeable targets into the RF target system

NOTE: DOES NOT INCLUDE INFRA RED TARGET. INJECTOR UNIT PONLY

Power Input: 12V d.c. 300mA
Connectors: 2 x Coaxial, 1 x IR Termination
Size (mm): 80 x 28 x 20
Link to product page    $66.00
Resi-Linx A1035

Resi-Linx Remote Zone Input Wallplate :: A1035

Listen to classical CDs in the study and rock ‘n’ roll in the games room at the same time! This distribution system allows two stereo sources to be shared across four audio zones simultaneously. A complete system consists of a central control hub (A 1032) and up to four remote zone wallplates (A 1031).

A 1035 Remote source input wallplate: Allows connection of 1 or 2 source devices in a remote location via Cat5e cable. This is perfect for structured installations where cabling is run to a central location but source equipment is located in home theatre or living room.
Link to product page    $77.00
Resi-Linx A1039

Resi-Linx IR Remote Extender System (A1039) :: A1039


Single room installation kit (allows up to 4 devices): When controlling up to 4 devices in 1 room the A 1039 kit is all you need. This system incorporates a plasma friendly target, junction box and power supply. The standard kit is supplied with 1 dual emitter for 2 devices. For additional devices add 1 x A 1053 dual emitter. Foxtel approved.

Link to product page    $228.55
Resi-Linx A1040

Resi-Linx IR Remote Extender System Junction Box (A1040) :: A1040


Single room installation kit (allows up to 4 devices): When controlling up to 4 devices in 1 room the A 1039 kit is all you need. This system incorporates a plasma friendly target, junction box and power supply. The standard kit is supplied with 1 dual emitter for 2 devices. For additional devices add 1 x A 1053 dual emitter. Foxtel approved.

Link to product page    $127.05
Resi-Linx A1041

Resi-Linx IR Remote Extender System Junction Box + Target (A1041) :: A1041


For multi room installations: Where you wish to control equipment from a central location (eg equipment rack), the A 1040 can be linked to the A 1041 up to 60m apart via UTP cable using the RJ45 sockets. For more than 2 rooms the A 1041 junction box + targets can be daisy chained allowing many rooms to be used. The A 1041 junction box + targets have DIP switch selection to send IR to either discrete components (maximum 2 - see below), common IR signal (maximum 8 devices from 4 outputs using dual emitters), or a direct injection signal (one only)

Link to product page    $173.25
Resi-Linx A1043

Resi-Linx IR Remote Extender System Hub (A1043) :: A1043


For installations with structured cabling: The use of an A 1043 star wiring hub simplifies larger installations. In these installations all A 1041
junction boxes + targets are wired to the A 1043 7 way star hub. This is then connected to an A 1040 emitter hub. This system also has discrete IR, common IR and direct injection functionality.

Link to product page    $90.75

Techtronics Products
Newsletter
Signup here to receive our monthly newsletter.
Email Address: