This compressor / limiter is essential for maintaining constant audio levels in PA systems, regardless of the dynamic range of the input signal source. It is installed between the input source and the amplifier and compresses or expands the signal to a constant level. This ensures the amplifier output does not vary greatly between low or high level signals. Typically used in live performances for vocalists and instrument groups, front of house and background music systems.
he A 5360 also includes; expander / gate circuit with variable release time and +15dBu maximum threshold. Stereo or dual mono operation of gating, compression and peak limiting. Hard or soft compression selection. Peak limiting before output stage. Separate sidechain inserts - enables an external processor or signal to control compression or gating. True RMS level detection. LED display for gain reduction. System bypass selection - can still operate if unit is powered down. Both channels include 3 pin balanced XLR and 6.35mm TRS for inputs and outputs. Output pad selects +4dBu or -10dBV for different system applications.
Features:
|
Stereo or dual mono operation
• Softcomp/hard knee selection
• Expander/gate with variable release
• Selectable low frequency shelf
• Peak limiting
• True RMS level detection
• System bypass buttons on each channel
•10 segment LED display
• Balanced XLR & 6.35mm jacks for input and output
• Separate sidechain inserts
• Output pad selects +4dBu or -10dBV for different system applications.
|
Specifications:
|
Input XLR 3 pin balanced 50k Ohm, 6.35mm jack balanced 25k Ohm
Output: XLR 3 pin balanced 120k Ohm, 6.35mm jack balanced 60k Ohm
Frequency response: 20Hz to 20kHz
Dynamic range: >106dB unweighted
Distortion: < 0.04% @ 1kHz
S/N ratio: < 90dB (22Hz to 22kHz)
Compressor:
Threshold: -40dBu to +20dBu
Threshold type: Soft comp or hard knee
Compression ratio 1:1 - 8:1, 60dB max
Expander/Gate:
Threshold OFF to +15dBu
Expansion ratio: 10:1
Max depth: .>60dB
Attack time:<500µs (from max depth.)
Release time: Adjustable 30ms - 3 sec
Peak limiter range: 0dBu to +20dBu
Gain adjust range: -20db to +20dB
Interchannel crosstalk: <-80dB
Dynamic range: >115dB
Controls: Threshold, release, ratio, attack, output gain, peak
Power supply: 240V AC
Dimensions: 482W x 172D x 44H
Weight: 2.2Kg
|
